Zebra 38825-1 Accessory

The Zebra RFD40 Sled connects to eConnex-enabled Zebra mobile computers through an electronic 8-pin connection that supports snap-and-go pairing. Supported devices include the Zebra TC21 and TC26, the EC50 and EC55, and future eConnex-enabled models, including WWAN-enabled variants.

Compatibility is handled by tool-free eConnex adaptors, so an associate can swap the adaptor to fit a different mobile computer in seconds without sending the device to IT for retrofitting. The sled also connects to Windows-based PCs over USB-C.

Both sleds share the same RFID performance, connectivity, battery, and durability. The difference is barcode scanning: the Premium Plus adds an integrated SE4100 imager for 1D and 2D scanning, which handles difficult barcodes including poorly printed, damaged, dirty, crinkled, low-contrast, glossy, and electronic barcodes on dimly lit phone screens. The imager adds a small amount of weight — the Premium is approximately 19.1 oz (541 g) with battery, the Premium Plus approximately 19.6 oz (556 g).

The Zebra RFD40 Sled uses a quick-release PowerPrecision+ 7,000 mAh Li-Ion battery that can be swapped without removing the mobile computer from the sled. An optional Battery Locking Foot secures the battery in place to help prevent damage or theft.

Charging cradle cups carry two sets of charging pins, so a single cradle can charge the sled alone, the mobile computer alone, or both while attached. Cradles come in 1-slot and multi-slot, charge-only and communication variants — 1-slot communication cradles use micro USB to a host PC, while multi-slot cradles include an Ethernet port for pushing configuration and firmware and pulling device health data over the network. A 4-slot battery toaster and USB-C cable and wall brick are also available.

Yes. When a real-time connection to backend systems is not available, the Zebra RFD40 Sled runs in batch mode and stores up to 40,000 RFID tag reads locally. Workers sync the sled later to upload the collected data to the host device.

The sled can also operate independently of a Zebra mobile computer: a USB-C port and pinned connector on the bottom let it run as a tethered RFID reader connected to a Windows PC or other host via a USB-C cable or cable cup. That same connection runs 123RFID Desktop for live and offline configuration, proofs of concept, demos and firmware upgrades.

The Zebra RFD40 Standard Sled reads 1,300+ RFID tags per second — which Zebra states is up to 30% faster than the next leading competitor — at a nominal read range of approximately 19.7+ ft. (6+ m). It supports the EPC Class 1 Gen 2 and EPC Gen2 V2 standards using Zebra proprietary radio technology, and includes an ultra-accurate item-finder mode for locating a specific tagged asset.

RF output is 0–30 dBm EIRP across regions: 902–928 MHz in the US, 865–868 MHz in the EU, and 916–921 MHz with listen-before-talk in Japan. A tri-function programmable trigger switches between RFID reading, barcode scanning and a third function of your choice, such as enter or push-to-talk.

The Zebra RFD40 UHF RFID Standard Sled is a handheld RAIN RFID reader that attaches to a Zebra mobile computer, adding UHF RFID reading and item-finding to a device your workers already carry. It weighs approximately 19.1 oz. (541 g) with battery and measures 5.94 in. H x 3.3 in. W x 6.5 in. L (15.1 x 8.4 x 16.65 cm).

It is used for cycle counting, item finding, planogram compliance, returns and BOPIS in retail; check-in, ticketing, loyalty cards and food traceability in hospitality; and specimen, patient, staff and asset tracking in healthcare.

The Zebra RFD40 Sled is specified for multiple 5 ft. (1.5 m) drops to concrete and 500 tumble cycles (1,000 drops from 1.6 ft. / 0.5 m) at room temperature. It carries IP54 sealing for dust and water protection and withstands ±15 kV air discharge and ±8 kV direct electrostatic discharge.

Its operating temperature range is 14° F to 122° F (-10° C to +50° C) at 5–85% non-condensing humidity, with storage from -40° F to 158° F (-40° C to +70° C). IP54 covers dust and splashing water, so the RFD40 suits retail floors, backrooms and healthcare settings, but it is not rated for the directed water jets an IP65 device withstands.

The Honeywell CT60-L1N-BSC111F features a 1D/2D imager with FlexRange scanning technology, enabling fast and accurate barcode capture even on damaged or poorly printed barcodes. This advanced optical scanning capability makes it ideal for warehouse and logistics environments where barcode quality may vary. We offer this model with full technical support to ensure optimal scanning performance in your operations.

The Zebra RFD40 Premium delivers industry-leading performance with over 1,300 tag reads per second, significantly reducing cycle-counting time and improving inventory management efficiency. This speed makes it ideal for high-volume warehouse and logistics operations where rapid data capture is critical.

The Honeywell 81001661 is a 6" x 18" synthetic tag label available in rolls of 305 tags per roll, with 2 rolls per case. This durable synthetic material is ideal for warehouse and logistics applications where labels need to withstand harsh environments. We offer this label at competitive pricing per roll for bulk ordering.

The Zebra RFD4031 delivers an industry-best 1,300+ tag readings per second, enabling you to significantly reduce cycle-counting time in warehouse and logistics operations. This high-speed performance is optimized for efficient inventory management and asset tracking across large environments.

The PM9100-D910RB features Datalogic's innovative green 'laser-like' acquisition system based on a miniaturized scan engine with outstanding 1D linear decoding capability. It includes Datalogic's exclusive 3GL (3 Green Lights) technology for superior good-read feedback, making it ideal for high-volume scanning environments where reliable confirmation is critical.

The Honeywell E26472 is a 6" x 4.5" rebar tag with a convenient hang hole for easy attachment to materials and inventory. Each roll contains 1,222 tags, providing substantial volume for large-scale labeling operations in warehouses and construction sites. We offer this product by the roll, making it cost-effective for high-volume applications.

The Honeywell 80001173 is a 6" x 18" synthetic legacy label designed for thermal transfer and direct thermal printing applications. Each roll contains 300 labels, and they're sold in cases of 2 rolls per case with pricing available per roll. These durable synthetic labels are ideal for warehouse and logistics environments requiring long-lasting barcode identification.

The Honeywell 81001559 is a 6" x 18" synthetic label with perforation at 4.5". Each roll contains 300 labels, and you receive 2 rolls per case, giving you 600 labels total per case purchase. We offer this product priced per roll, making it easy to scale your labeling needs.

The Honeywell 14084318 is a 4.33" x 1,476'' TMX2200 wax ribbon designed for Zebra thermal label printers that support the TMX2200 ribbon format. For specific printer compatibility verification, contact us today and our team can confirm whether this ribbon works with your equipment.

Yes, the CT60-L1N-BSC111F is built with an IP67/IP65 rating, providing excellent protection against dust and water ingress in demanding warehouse and manufacturing settings. The device is engineered for durability and extended uptime in challenging field conditions. Contact us today to discuss how this rugged mobile computer fits your warehouse requirements.

The RFD40 Premium and Premium Plus Sleds are designed to connect seamlessly with Zebra eConnex-enabled devices, including the TC21/26, EC50/55, and future Zebra models. The devices support Bluetooth 5.3 and Wi-Fi 6 connectivity, ensuring compatibility with both current and upcoming Zebra mobile computers.

The RFD4031 connects to Zebra eConnex-enabled devices such as the TC21/26, EC50/55, and future models in seconds via Bluetooth and Wi-Fi connectivity. This seamless integration allows your existing mobile computer fleet to gain full RFID reading capabilities without replacing hardware.

Yes, the PM9100-D910RB has been tested to withstand extreme environmental conditions and is built to last in the toughest industrial applications. Its rugged construction makes it well-suited for warehouse, logistics, and manufacturing environments where durability is essential. Contact us today to discuss your specific environmental requirements.

The E26472 rebar tag is specifically designed for identifying and tracking rebar, steel reinforcement, and other construction materials in warehouses and job sites. The hang hole design allows for secure attachment to bundles and individual pieces without requiring adhesive, making it ideal for outdoor and rugged environments. This label format is widely used in construction logistics and material management workflows.

Each case of the Honeywell 14084318 ribbon contains 12 rolls, with pricing quoted per individual roll. This bulk packaging is ideal for high-volume warehouse and logistics operations that require consistent ribbon supply.

These 6" x 18" synthetic labels are designed for industrial and warehouse applications including package sorting, light manufacturing, and logistics operations. The synthetic material provides durability in demanding environments, making them suitable for fixed asset tracking and inventory management. Contact us today to discuss the right label solution for your specific warehouse or manufacturing needs.

Yes, the Honeywell 81001559 is a synthetic thermal transfer label designed for use with thermal transfer barcode printers. The synthetic material provides excellent durability and print quality when used with compatible thermal transfer equipment available from us.

The Honeywell 80001173 supports both thermal transfer and direct thermal printing methods, making it versatile for different barcode printer configurations. This compatibility ensures you can use these labels with a wide range of Honeywell and third-party thermal printers available from us. Contact us today to confirm compatibility with your specific printer model.

Each case of Honeywell 80001173 barcode labels contains 2 rolls, with 300 labels per roll, giving you 600 total labels per case. This bulk packaging is designed for high-volume warehouse and logistics operations. Visit barcodesinc.com or contact us today for volume pricing and bulk order options.

The CT60-L1N-BSC111F supports 802.11 a/b/g/n/ac WiFi and Bluetooth connectivity, ensuring reliable wireless communication across your enterprise network. This multi-band WiFi support provides flexibility for deployment in various facility layouts and network configurations. Visit barcodesinc.com to learn more about integration options for your existing infrastructure.

The Zebra RFD40 offers an effective read range of 20+ feet (19.7+ feet or 6+ meters), allowing your team to capture inventory data from a distance and improve workflow efficiency in warehouse and logistics environments.

Yes, the RFD4031 features industry-first Wi-Fi 6 (802.11ax) connectivity, which enables simple over-the-air (OTA) device management. This allows you to remotely update firmware and manage configurations across your fleet without physical intervention, reducing IT overhead.

The PM9100-D910RB uses Datalogic's proprietary STAR Cordless System 2.0, a narrow-band radio system that operates without interference from existing wireless solutions like Wi-Fi and Bluetooth. This system supports scalable solutions from point-to-point to point-to-multipoint applications with seamless roaming for complex installations.

The Honeywell 81001661 synthetic labels are engineered for reliable performance with thermal transfer printing technology. The synthetic material provides excellent adhesion and durability compared to standard paper labels. Visit barcodesinc.com or contact our team to confirm compatibility with your specific printer model and discuss label options.

Yes, the E26472 rebar tag is engineered for durability in demanding conditions typical of construction sites and outdoor storage areas. The hang hole design and label construction provide reliable performance even when exposed to weather, handling, and environmental stress. We recommend this product for applications requiring labels that withstand physical wear and outdoor exposure.

The Honeywell 14084318 is a wax-based thermal transfer ribbon formulated for general-purpose barcode and label printing applications. Wax ribbons provide excellent print quality on coated label stocks and are cost-effective for standard warehouse labeling needs.

The Honeywell 81001559 is manufactured from synthetic material, which offers superior durability compared to paper labels. This synthetic construction makes it ideal for warehouse, logistics, and industrial environments where labels need to withstand moisture, abrasion, and temperature variations.

Yes, the Honeywell 14084318 with its 1,476'' length per roll is designed for production printing in warehouses and logistics operations. The 12-roll case format supports continuous operations without frequent ribbon changes, making it ideal for busy distribution centers.

Yes, the RFD40 Premium and Premium Plus are built for demanding warehouse environments with a 5-foot drop rating and IP54 sealing for dust and water resistance. This durability rating ensures the device can withstand the rigors of daily warehouse operations and harsh conditions.

The Honeywell 81001559 features perforation at 4.5" intervals, allowing for easy separation of individual labels from the 6" x 18" roll. This perforation design ensures clean, consistent label separation during high-volume labeling operations.

The CT60-L1N-BSC111F comes equipped with 4GB of RAM and 32GB of internal storage, providing sufficient capacity for enterprise applications and data processing in the field. Running Android with a powerful processor, it delivers the performance needed for real-time connectivity and business-critical applications. Our team can help you determine if these specifications meet your specific deployment needs.

The Zebra RFD4031 is equipped with a Standard Range Circular Polarized Antenna, which provides optimized read range for typical warehouse and logistics applications. This antenna configuration balances coverage area with accuracy for reliable tag detection.

Yes, the Honeywell 80001173 features synthetic material construction, which provides superior durability compared to standard paper labels in demanding warehouse and logistics environments. Synthetic labels resist moisture, chemicals, and abrasion, making them ideal for outdoor storage areas, cold chain applications, and high-traffic warehouse settings. Our team can help you select the right label material for your specific environmental conditions.

The PM9100-D910RB connects via USB and operates on the 910 MHz frequency band as a cordless scanner. The base station (sold separately) supports various connection options, and Datalogic offers models with Ethernet and Industrial Ethernet protocols such as Ethernet IP and Modbus for network integration. Visit barcodesinc.com for complete base station specifications.

Each case contains 2 rolls of the Honeywell 81001661 labels, with 305 tags per roll, providing 610 total labels per case. This bulk packaging is designed for high-volume warehouse and logistics operations. Contact us today for volume pricing and delivery options.

The E26472 labels are compatible with thermal transfer and direct thermal barcode printers available from us, allowing you to print custom barcodes, serial numbers, and text directly onto each tag. This flexibility enables you to create labels tailored to your specific inventory tracking and identification needs. Contact us today to discuss printer compatibility and label customization options for your operation.

We offer the Honeywell 14084318 with pricing structured per roll, though it's packaged in cases of 12. Visit barcodesinc.com or contact us today to discuss bulk ordering options and volume pricing that fit your operational needs.

The Honeywell 80001173 is a synthetic label, offering greater durability, moisture resistance, and longevity compared to standard paper labels. Synthetic labels maintain barcode readability longer in harsh conditions and resist fading, tearing, and chemical damage, making them more cost-effective for long-term asset tracking and inventory management. Contact us today to discuss whether synthetic or paper labels are best for your application.

Each roll of the Honeywell E26472 contains 1,222 tags, providing excellent value for high-volume labeling projects. This quantity is designed to minimize changeovers and reduce downtime in busy warehouse and construction environments. Pricing is per roll, making it easy to calculate costs for your labeling requirements.

The PM9100-D910RB model includes a 4-key display configuration, making it suitable for applications requiring basic user feedback and input. Datalogic also offers PM9100 models with 16-key keypads for more complex data entry needs. The base station, power supply, and interface cables are sold separately.

Each case of Honeywell 81001559 contains 2 rolls with 300 labels per roll, totaling 600 labels per case. Contact us today to discuss bulk ordering options that may provide additional value for your warehouse or logistics operation.

The RFD40 Premium and Premium Plus feature industry-first Wi-Fi 6 (IEEE 802.11 ax/ac/a/b/g/n) and Bluetooth 5.3, enabling seamless over-the-air (OTA) device management and reliable connectivity with current and future Zebra mobile computers. This future-proof connectivity ensures your investment remains compatible with evolving technology.

The RFD4031 includes a 7000mAh battery with enhanced capacity to support extended shift operations, combined with an outstanding ergonomic design for all-day handheld use. The device also features a tri-function programmable trigger for customized workflow integration.

Yes, the CT60-L1N-BSC111F includes a 13MP camera, enabling photo capture and documentation capabilities alongside barcode scanning functionality. This integrated imaging solution reduces the need for multiple devices in field operations. Contact us today to explore how this multi-function capability can streamline your mobile workforce processes.

Synthetic labels like the Honeywell 81001661 offer superior durability, moisture resistance, and longevity compared to standard paper labels, making them ideal for harsh warehouse environments. They maintain barcode readability even when exposed to chemicals, temperature fluctuations, and physical wear. We offer synthetic label solutions that provide better ROI for long-term asset tracking and inventory management.

Installation manuals and technical documentation are available by request, and our team at Barcodes Inc can provide guidance on proper label application and printer configuration. For detailed product specifications or installation support, contact us today or visit barcodesinc.com to connect with our AIDC experts who can assist with your barcode labeling setup.

The RFD40 is equipped with a 7,000 mAh battery featuring quick-release functionality for convenient swaps during shifts. The device operates reliably in temperatures from -10°C to 50°C (14°F to 122°F), making it suitable for diverse warehouse and logistics environments.

The Honeywell 14084318 ribbon measures 4.33 inches in width and 1,476 feet in length per roll, making it compatible with standard TMX2200 thermal printer systems. This size is suitable for most warehouse barcode and shipping label applications.

We offer flexible ordering options for Honeywell barcode labels to meet your specific warehouse and logistics requirements. Our team can discuss custom quantities, bulk pricing, and integration with your existing barcode scanning and inventory management systems. Contact us today to explore options that fit your operational needs.

The RFD4031 supports EPC Class 1 Gen 2 and EPC Gen2 V2 standards with Zebra Proprietary Radio Technology. It operates across multiple frequency ranges including US (902–928 MHz), EU (865–868 MHz), and Japan (916–921 MHz) with 0–30 dBm EIRP output, making it suitable for global deployment.

The E26472 rebar tags are compatible with both thermal transfer and direct thermal printing technologies, giving you flexibility in choosing the right printer for your operation. Thermal transfer printing is ideal if you need durable, long-lasting labels for outdoor use, while direct thermal works well for shorter-term applications. We offer a full range of compatible barcode printers—visit barcodesinc.com or contact us today to find the right solution for your labeling needs.

The CT60-L1N-BSC111F comes with a standard battery designed to support extended shifts in warehouse and logistics operations. The device is engineered for long-lasting battery performance to maintain productivity throughout demanding workdays. Visit barcodesinc.com or contact our team for detailed battery specifications and runtime expectations under your specific usage conditions.

The PM9100-D910RB is a 1D linear imager scanner designed to decode 1D linear barcodes with outstanding decoding capability. Its green laser-like acquisition system provides reliable reading performance across standard barcode formats used in retail, warehouse, and logistics operations. For specific barcode format compatibility, contact our team today.

The synthetic material construction of the Honeywell 81001559 makes it well-suited for challenging environments including outdoor storage, cold rooms, and high-humidity areas. The durable synthetic substrate resists moisture, temperature extremes, and physical wear better than standard paper labels, making it ideal for logistics and warehouse applications.