The Zebra Z-Perform 1000D 3.2 mil Receipt is a standard, direct thermal, bright white, uncoated, 3.2 mil receipt paper with a high-tack permanent acrylic adhesive for applications that require limited durability. It is designed for use in mobile printers and is typically used for short-term, temporary labeling applications. It is recommended for use with the QLn Series and ZQ500 Series printers.
Features
Standard, 3.2 mil receipt paper with a high-tack permanent acrylic adhesive for applications that require limited durability.
Designed for use in mobile printers and is typically used for short-term, temporary labeling applications. It is recommended for use with the QLn Series and ZQ500 Series printers.
Component Description Caliper Facestock White, uncoated paper 3.2 mil Adhesive All-temp, high-tack, acrylic-based 0.7 mil Liner 40 lb. SCK 3.2 mil TOTAL ± 10% 6.4 mil
TEMPERATURE PERFORMANCE
Minimum Application Temperature Service Temperature Optimal Storage Conditions 32° F (0° C) -75° F to 120° F (-59° C to 49° C) 72° F (22° C) at 50% RH Expected Exterior Life Not recommended for outdoor use
CHEMICAL RESISTANCE
Chemical Weak Blood Body Fluid Salt Water Water Window Cleaner Moderate Alcohol NR Ammonia NR Bleach NR IPA NR Harsh Gasoline NR Grease NR Oil NR Extreme Acetone NR IR Reflow NR MEK NR TCE NR Xylene NR
SUGGESTED APPLICATIONS
• Labeling of curved surfaces, such as: Test tubes, Vials, Syringes
Zebra 8000D Lab labels are specially designed for laboratory applications where sample tracking and identification are critical. These direct thermal labels provide excellent print quality and durability in low-temperature environments, with adhesive optimized for secure attachment to a variety of surfaces commonly found in lab settings.
What are the dimensions and roll specifications for Zebra 10025479 labels?
These labels measure 2x1.9375 inches (50.8x49.2mm) and come with a 3-inch (76.2mm) core. Each roll contains 2,700 labels, with 6 rolls per box. The labels feature slits through the facestock that create three different label sizes: two 1x0.9375 inch labels and two 2x1 inch labels per original label.
Are Zebra 8000D Lab labels suitable for cold storage environments?
Yes, Zebra 8000D Lab labels are specifically engineered to perform reliably in low-temperature environments, making them ideal for cold storage, freezer applications, and other temperature-sensitive laboratory settings. Their durable coating and permanent adhesive maintain integrity and readability even in challenging thermal conditions.
What type of thermal printing technology do these labels use?
Zebra 10025479 labels are direct thermal labels, meaning they require no ink or ribbon—the printhead applies heat directly to the label material to create the image. This technology is ideal for laboratories where simplicity, reliability, and cost-effectiveness are important for high-volume sample tracking applications.
What adhesive type is used on Zebra 8000D Lab labels?
These labels feature a permanent adhesive that is specifically formulated to securely attach to various laboratory surfaces and equipment. The adhesive is designed to maintain a strong bond even in low-temperature environments and demanding lab conditions.
Can I order Zebra 8000D Lab labels from Barcodes Inc?
Yes, we offer Zebra 8000D Lab labels (model 10025479) as part of our comprehensive selection of direct thermal labels and laboratory printing supplies. Contact us today or visit barcodesinc.com to check availability, request samples, or discuss your specific laboratory labeling requirements.
The Zebra 10025479 Labels is also known as
ZEB-10025479
or 10025479.
Full specifications (PDF)
