Zebra 8000D Lab Labels Model Overview
The Zebra Z-Perform 1000D 3.2 mil Receipt is a standard, direct thermal, bright white, uncoated, 3.2 mil receipt paper with a high-tack permanent acrylic adhesive for applications that require limited durability. It is designed for use in mobile printers and is typically used for short-term, temporary labeling applications. It is recommended for use with the QLn Series and ZQ500 Series printers.
Features
- Standard, 3.2 mil receipt paper with a high-tack permanent acrylic adhesive for applications that require limited durability.
- Designed for use in mobile printers and is typically used for short-term, temporary labeling applications. It is recommended for use with the QLn Series and ZQ500 Series printers.
All products should be pre-tested to ensure it meets all intended requirements of specific end-use applications. For more information, visit www.zebra.com/supplies Product Performance and Suitability: The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. NA and Corporate Headquarters | +1 800 423 0442 | [email protected] ©2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.
MATERIAL CONSTRUCTION
Component Description Caliper Facestock White, uncoated paper 3.2 mil Adhesive All-temp, high-tack, acrylic-based 0.7 mil Liner 40 lb. SCK 3.2 mil TOTAL ± 10% 6.4 mil
TEMPERATURE PERFORMANCE
Minimum Application Temperature Service Temperature Optimal Storage Conditions 32° F (0° C) -75° F to 120° F (-59° C to 49° C) 72° F (22° C) at 50% RH Expected Exterior Life Not recommended for outdoor use
CHEMICAL RESISTANCE
Chemical Weak Blood Body Fluid Salt Water Water Window Cleaner Moderate Alcohol NR Ammonia NR Bleach NR IPA NR Harsh Gasoline NR Grease NR Oil NR Extreme Acetone NR IR Reflow NR MEK NR TCE NR Xylene NR
SUGGESTED APPLICATIONS
• Labeling of curved surfaces, such as: Test tubes, Vials, Syringes
A direct thermal paper label with a high-tack permanent acrylic adhesive specifically designed to adhere to small, curved, surfaces.
Full specifications (PDF)