Zebra 10025356 Barcode Label
Full specifications (PDF)
Zebra 8000D Lab Labels Model Overview
- Standard, 3.2 mil receipt paper with a high-tack permanent acrylic adhesive for applications that require limited durability.
- Designed for use in mobile printers and is typically used for short-term, temporary labeling applications. It is recommended for use with the QLn Series and ZQ500 Series printers.
All products should be pre-tested to ensure it meets all intended requirements of specific end-use applications. For more information, visit www.zebra.com/supplies Product Performance and Suitability: The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. NA and Corporate Headquarters | +1 800 423 0442 | [email protected] ©2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.
MATERIAL CONSTRUCTION
Component Description Caliper Facestock White, uncoated paper 3.2 mil Adhesive All-temp, high-tack, acrylic-based 0.7 mil Liner 40 lb. SCK 3.2 mil TOTAL ± 10% 6.4 mil
TEMPERATURE PERFORMANCE
Minimum Application Temperature Service Temperature Optimal Storage Conditions 32° F (0° C) -75° F to 120° F (-59° C to 49° C) 72° F (22° C) at 50% RH Expected Exterior Life Not recommended for outdoor use
CHEMICAL RESISTANCE
Chemical Weak Blood Body Fluid Salt Water Water Window Cleaner Moderate Alcohol NR Ammonia NR Bleach NR IPA NR Harsh Gasoline NR Grease NR Oil NR Extreme Acetone NR IR Reflow NR MEK NR TCE NR Xylene NR
SUGGESTED APPLICATIONS
• Labeling of curved surfaces, such as: Test tubes, Vials, Syringes
Frequently Asked Questions
What are Zebra 8000D Lab labels designed for?
Zebra 8000D Lab labels are specially designed for laboratory applications, providing excellent print quality and durability in low-temperature environments. These labels are perfect for sample tracking and identification, ensuring accuracy and reliability in critical lab settings where precise labeling is essential.
What are the dimensions and specifications of the Zebra 10025356 label?
The Zebra 10025356 is a 4x1.25" (101.6x31.8mm) direct thermal label with a coated surface and permanent adhesive. Each roll contains 3,600 labels with a 3" (76.2mm) core, and comes in a box of 1 roll, making it ideal for high-volume laboratory tracking applications.
What type of adhesive does this label have and what surfaces will it stick to?
The Zebra 8000D Lab label features a permanent adhesive that is optimized for secure attachment to a variety of surfaces commonly found in laboratory environments. This ensures reliable adhesion for long-term sample identification and tracking without label failure or peeling.
Can these labels be used in cold storage or freezer environments?
Yes, Zebra 8000D Lab labels are specifically engineered for low-temperature environments, making them ideal for cold storage, freezer, and cryogenic applications. Their durable construction maintains print quality and adhesive performance even in challenging temperature conditions typical of laboratory settings.
What printing method do I need to print these Zebra 8000D Lab labels?
These labels use direct thermal printing technology, which means you'll need a direct thermal compatible printer to print them. Direct thermal printing requires no ink or toner ribbons, making it a cost-effective solution for laboratory label production.
Where can I purchase Zebra 8000D Lab labels and get technical support?
We offer Zebra 8000D Lab labels and can provide expert guidance on label selection and printer compatibility for your laboratory needs. Contact us today at barcodesinc.com or reach out to our team to discuss your sample tracking requirements and place an order.
