Zebra 10025352 Barcode Label
Full specifications (PDF)
Zebra 8000D Lab Labels Model Overview
- Standard, 3.2 mil receipt paper with a high-tack permanent acrylic adhesive for applications that require limited durability.
- Designed for use in mobile printers and is typically used for short-term, temporary labeling applications. It is recommended for use with the QLn Series and ZQ500 Series printers.
All products should be pre-tested to ensure it meets all intended requirements of specific end-use applications. For more information, visit www.zebra.com/supplies Product Performance and Suitability: The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. NA and Corporate Headquarters | +1 800 423 0442 | [email protected] ©2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.
MATERIAL CONSTRUCTION
Component Description Caliper Facestock White, uncoated paper 3.2 mil Adhesive All-temp, high-tack, acrylic-based 0.7 mil Liner 40 lb. SCK 3.2 mil TOTAL ± 10% 6.4 mil
TEMPERATURE PERFORMANCE
Minimum Application Temperature Service Temperature Optimal Storage Conditions 32° F (0° C) -75° F to 120° F (-59° C to 49° C) 72° F (22° C) at 50% RH Expected Exterior Life Not recommended for outdoor use
CHEMICAL RESISTANCE
Chemical Weak Blood Body Fluid Salt Water Water Window Cleaner Moderate Alcohol NR Ammonia NR Bleach NR IPA NR Harsh Gasoline NR Grease NR Oil NR Extreme Acetone NR IR Reflow NR MEK NR TCE NR Xylene NR
SUGGESTED APPLICATIONS
• Labeling of curved surfaces, such as: Test tubes, Vials, Syringes
Frequently Asked Questions
What are Zebra 8000D Lab labels designed for?
Zebra 8000D Lab labels are specially designed for laboratory applications, providing excellent print quality and durability in low-temperature environments. These labels are ideal for sample tracking and identification, ensuring accuracy and reliability in critical lab settings where temperature control is essential.
What are the specifications for the Zebra 10025352 label?
The Zebra 10025352 is a direct thermal label measuring 4x1.25 inches (101.6x31.8mm) with a coated surface and permanent adhesive. Each roll contains 3,600 labels with a 3-inch (76.2mm) core, and you receive 1 roll per box for convenient ordering and storage.
What printing technology do these Zebra lab labels use?
These Zebra 8000D Lab labels utilize direct thermal printing technology, which eliminates the need for ink or toner ribbons. Direct thermal printing is ideal for laboratory environments where simplicity, reliability, and cost-effectiveness are priorities.
What surfaces can the permanent adhesive on these labels stick to?
The permanent adhesive on Zebra 8000D Lab labels is optimized for secure attachment to a variety of surfaces commonly found in laboratory settings. This ensures reliable labeling across different sample containers, equipment, and storage systems used in lab operations.
Are Zebra 8000D Lab labels suitable for cold storage environments?
Yes, Zebra 8000D Lab labels are specifically engineered to perform in low-temperature environments, making them ideal for cold storage, freezer applications, and refrigerated sample tracking. Their durable coating and adhesive maintain integrity and readability even in demanding temperature conditions.
Where can I purchase Zebra 8000D Lab labels?
We offer Zebra 8000D Lab labels and a complete range of barcode labeling solutions for laboratory and warehouse applications. Visit barcodesinc.com or contact us today to order the Zebra 10025352 labels and get expert guidance on your lab labeling needs.
