Agency Approvals:
The NETGEAR XSM7224L-10000S is a Layer 3 upgrade license for the ProSafe XSM7224S 24-port 10 Gigabit Stackable L2+ Managed Switch. This license upgrade enables advanced Layer 3 routing capabilities on your switch, allowing for more sophisticated network segmentation and inter-VLAN routing beyond standard Layer 2 switching functionality. We offer this upgrade license to help you maximize the capabilities of your existing NETGEAR switch infrastructure.
The DTC4500e supports multiple encoding technologies including magnetic stripe, HID Prox, iCLASS (SE), MIFARE/DESFire, and Seos Smart Card encoding. This versatility allows you to produce access control cards and other encoded identity solutions in a single printer, making it ideal for organizations with diverse security requirements. Contact us today to discuss which encoding options best fit your needs.
The SLS D-800 is designed to run on Power-over-Ethernet (PoE) with no additional power cables required. This makes installation simpler and eliminates the need for separate electrical infrastructure at your dock door chokepoints.
The NETGEAR AXC761-10000S is a 3.28 ft network cable featuring SFP+ connectors on both ends, designed for high-speed data networking applications. This SFP+ to SFP+ configuration supports 10 Gigabit Ethernet connectivity, making it ideal for backbone and uplink connections in enterprise network environments.
The SLS M-800 delivers an impressive read range of up to 50 feet, enabled by its cutting-edge Wave® antenna technology. This extended range makes it ideal for high-volume warehouse and distribution center environments where efficiency and accuracy are critical.
The SLS D-Series maintains a 99.99% scan rate accuracy while preventing cross-readings between reading sites. This high accuracy is achieved through Wave® Antenna technology that tunes the portal according to your surrounding environment, ensuring reliable tag detection at both pallet and item levels.
The InShelf 360 is a commercial-grade 36-inch full HD digital signage display featuring a bright and vivid display to capture customer attention, durable precision aluminum chassis with hardened front glass for easy cleaning, flexible mounting options with three bracket styles for optimal viewing angles, and InDAISY+ daisy chain technology that enables video wall functionality from a single PC. These features make it an efficient solution for retail environments and customer engagement.
The SLS M-Series RFID Mobile Solutions is designed to address mobility challenges in inventory management. It offers mobile scanning solutions that allow you to read RFID inventory while moving throughout your facility, making it ideal for warehouses and logistics operations where mobility is a critical bottleneck.
The SLS T-Series RFID Tunnel is designed to error-proof and enhance your supply chain by verifying shipments at item-level or container level. It provides visibility into what was actually shipped versus what was ordered, and serves as a quality control safenet to ensure shipment accuracy and improve customer experience.
The NETGEAR AXC763-10000S features SFP+ connectors on both ends, making it compatible with high-speed data networking equipment that uses SFP+ interfaces. This configuration supports direct connection between compatible network devices without requiring adapters.
SLS VIEW is designed to track all tagged enterprise assets, including equipment, supplies, and personnel throughout your supply chain. The platform provides real-time visibility into asset movement from receipt to shipping, enabling seamless tracking and management across your entire operation.
The SLS D-500 is designed to run on Power-over-Ethernet (PoE) with no power cables required. This makes installation simpler at dock door chokepoints where human intervention and manual barcode scanning occur, eliminating the need for dedicated electrical infrastructure.
Yes, the M-Series is specifically engineered for mobile RFID inventory scanning as you move around your facility. This mobile-first approach helps streamline inventory management workflows when stationary scanning stations aren't practical for your operation.
The Lenovo InShelf 360 mounts seamlessly on Lozier and Madix shelving systems, the leading shelf systems used in retail environments. The display comes with three styles of mounting brackets to accommodate different shelf configurations and allow adjustment for optimal viewing angles.
The SLS D-500 maintains a 99.99% scan rate accuracy while operating at minimal power consumption. This high accuracy level is achieved while preventing cross-readings between reading sites, ensuring reliable inventory tracking at your dock doors.
No. The SLS D-Series is designed to run on Power-over-Ethernet (PoE) with no additional power cables required at chokepoints. It's a plug-and-play, scalable solution that operates at minimal power and requires no additional servers for deployment.
The SLS D-800 maintains a 99.99% scan rate accuracy while operating at minimal power consumption. This high accuracy level is achieved while preventing cross-readings between multiple reading sites.
SLS VIEW offers seamless integration with MES, WMS, ERP, and blockchain systems, allowing you to connect asset tracking data across your existing enterprise infrastructure. This compatibility ensures that real-time RFID data flows smoothly into your current operational platforms.
Yes, the DTC4500e features dual-sided printing capability, allowing you to print on both sides of the card in a single pass. This provides more space for cardholder information and security features like duplicate photos and digital signatures. We offer the DTC4500e with this dual-sided printing module as a standard feature available from us.
The SLS M-800 is equipped with a robust Definitive 250Wh battery that provides 8+ hours of continuous operation, allowing you to complete full cycle counts before needing to recharge. For quick turnarounds, the device also features a 20-minute quick charge function that delivers 1.5 hours of use, with standard recharge time taking 2-3 hours.
Yes, the AXC761-10000S is well-suited for warehouse and data center environments where high-speed network connectivity is required. The SFP+ interface standard supports 10 Gigabit speeds, making it appropriate for connecting network infrastructure, storage systems, and high-performance computing equipment commonly found in logistics and warehouse operations.
The NETGEAR XSM7224S features 24 RJ-45 autosensing 10/100/1000 PoE+ ports that support IEEE 802.3at PoE+ standard, plus 4 SFP+ 1/10GbE ports for high-speed uplink connectivity. The switch also includes a dual-personality serial console port supporting both RJ-45 and USB micro-B connections for management access. This flexible port configuration makes it ideal for mixed-speed warehouse and logistics environments.
Yes. SLS designs the T-Series tunnel solution with your specific business processes in mind, whether you have an existing conveyor that you'd like to deploy RFID on or plan to add conveyor in the future. Contact us today to discuss your current setup and how we can integrate the solution.
The NETGEAR AXC763-10000S is a 9.84 ft network cable, providing adequate reach for connecting network equipment within standard rack and cabinet configurations. This length is suitable for most data center and warehouse networking deployments.
Yes, the DTC4500e offers optional dual-sided simultaneous lamination that applies overlaminates to produce high-security cards resistant to forgery while increasing card durability. The lamination capability is field-upgradeable, meaning you can add it later as your security needs evolve. Visit barcodesinc.com to explore lamination options for your card production requirements.
The SLS D-Series is compatible with Impinj R420 and R700 readers, as well as Zebra FX9600 and FX7500 readers. This compatibility allows you to integrate the dock door solution with your existing RFID infrastructure from these leading manufacturers.
The NETGEAR AXC761-10000S network cable is 3.28 feet in length, providing a compact interconnect solution for equipment positioned in close proximity within server racks, network cabinets, or data center installations.
The XSM7224S is equipped with a Dual Core ARM Cortex A9 processor running at 1016 MHz, 1 GB DDR3 SDRAM, and 4 GB eMMC storage. The switch provides a packet buffer size of 12.38 MB with 4.5MB ingress and 7.875MB egress capacity, delivering reliable performance for demanding network operations in warehouse and logistics environments.
SLS VIEW supports multiple platforms including Mobile (Android Embedded Client), Cloud (MS Azure Cloud), Windows Applications, and Linux Embedded Client. The suite includes seven key modules: SLSVIEW Capture, SLSVIEW Cloud, SLSVIEW Mobile, SLSVIEW Hub, SLSVIEW M-Series, SLSVIEW T-Series, and SLSVIEW D-Series.
Yes, the NETGEAR AXC763-10000S is designed for professional network infrastructure and is available from us for deployment in warehouse, logistics, and enterprise environments. The SFP+ connectivity supports high-speed data transfer required for inventory management and RFID integration systems.
SLS uses Wave technology to automatically 'tune' the D-500 portal according to the surrounding environment, providing unrivaled reading zone controllability. This adaptive tuning ensures consistent performance across different dock configurations and environmental conditions.
The SLS M-Series RFID Mobile Solutions is built to scan RFID inventory across your facility. For specific details about RFID tag compatibility, frequency support, and read range capabilities, we recommend contacting our team today or visiting barcodesinc.com to discuss your exact inventory requirements.
InDAISY+ daisy chain technology enables video wall functionality from a single PC, which significantly reduces costs associated with additional hardware and software licenses. This allows retailers to create multi-display video walls without needing separate computers or control systems for each screen.
Yes, the SLS T-Series RFID Tunnel supports both item-level tagging and container tagging, making it flexible for different supply chain verification needs. This allows you to choose the tagging strategy that best fits your operation.
The SLS M-800 is compatible with multiple leading RFID readers, including the Impinj R420, Impinj R700, Zebra FX9600, Zebra FX7500, and Alien F800. This flexibility allows you to integrate the M-800 with your existing reader infrastructure. Contact us today to confirm compatibility with your specific setup.
The SLS D-800 uses Wave technology to tune the portal according to your surrounding environment, providing unrivaled reading zone controllability. This technology ensures that readings are isolated to your specific dock door and prevents interference from adjacent reading sites.
Yes, the M-Series is designed as a mobile solution for inventory management in facility-based operations. It's well-suited for warehouse managers and logistics teams who need to conduct RFID scanning while maintaining mobility throughout their operations.
The NETGEAR AXC763-10000S is a data networking cable with SFP+ connectors that supports high-speed network connectivity for professional applications. It is compatible with network switches, routers, and other equipment featuring SFP+ ports used in enterprise data networking.
Yes, the InShelf 360 is built with a precision aluminum chassis and hardened front glass specifically designed to withstand busy retail settings. The hardened glass also facilitates easy cleaning, making it practical for high-traffic retail locations where the display may be exposed to dust, moisture, and frequent contact.
The NETGEAR XSM7224S measures 17.42 inches wide by 9.7 inches deep by 1.73 inches high (44.25 x 24.63 x 4.39 cm) in a standard 1U rack-mount form factor, and weighs 6.83 pounds (3.10 kg). This compact 1U design makes it easy to integrate into existing rack infrastructure in data centers and network closets.
All SLS T-Series RFID Tunnels are designed and built at SLS headquarters in Howell, Michigan. This ensures quality construction and allows SLS to customize solutions with your business success in mind.
Yes, the AXC761-10000S features standard SFP+ connectors on both ends, making it compatible with any network equipment that has SFP+ ports. This includes switches, routers, network interface cards, and other enterprise networking devices that support 10 Gigabit SFP+ connectivity.
The DTC4500e features high-capacity ribbons that enable it to print twice as many full-color cards as most competing printers before ribbon replacement is needed. This extended ribbon life provides continuous high-quality card printing with fewer supply changes, reducing operational downtime and improving efficiency for high-volume production environments.
The SLS M-800 is specifically designed with a pallet shape for easy forklift driver operation, reducing the need for pedestrian traffic in hard-to-reach and high-volume scanning locations. Built for durability in manufacturing, warehouse, and distribution center environments, it minimizes human error and improves count accuracy in intense forklift traffic scenarios.
The SLS D-Series operates in a temperature range of -4°F to 140°F (-20°C to 60°C) and supports frequency ranges of 902-928 MHz for North America and 865-868 MHz for Europe, with a maximum EIRP of 36 dBm for FCC compliance. This wide operating range ensures reliable performance across diverse warehouse and dock environments.
The SLS D-800 RFID Dock Door is 96 inches in height and features 2 antennas for optimal reading coverage at your dock entrance. This configuration is designed to accommodate standard dock door openings where human intervention and manual barcode scanning may be required.
SLS VIEW provides real-time insights into all tagged enterprise assets, empowering businesses to make informed decisions based on reliable data collected across their entire supply chain. The platform's automated asset collection and real-time updates maintain accurate inventory and asset status, enabling better operational decisions.
The SLS D-500 is equipped with 2 antennas and stands at 62 inches in height. This dual-antenna configuration supports reliable RFID reading across the dock door portal opening.
We offer four D-Series models: the D-800 (96"x15"x4", 45lbs), D-500 (62"x15"x4", 30lbs), D-200 (24"x15"x4", 10lbs), and D-100 (61"x9"x2", 10lbs). Each model provides different coverage widths to accommodate various dock door configurations and installation requirements.
No, the NETGEAR AXC763-10000S uses SFP+ connectors and is not compatible with standard RJ-45 Ethernet cables. SFP+ is a specialized high-speed connector type used for fiber optic and direct-attach copper connections in professional networking equipment.
Unlike fixed scanning stations, the SLS M-Series provides mobile RFID reading capabilities, allowing your team to scan inventory while moving around your facility. This mobility eliminates the bottleneck of having to bring items to a stationary reader and significantly improves workflow efficiency in dynamic warehouse environments.
The InShelf 360 is a 36-inch commercial-grade display with full HD resolution, providing clear and colorful visuals to effectively capture customer attention in retail environments.
Yes, the NETGEAR XSM7224S is a stackable switch, which means you can connect multiple units together to create a unified switching fabric. This stackability feature is particularly valuable for growing warehouse and logistics operations that need to expand network capacity without managing multiple independent switch configurations.
Yes, SLS VIEW features a user-friendly interface that simplifies asset management and operational processes for your team. The intuitive design reduces complexity while delivering robust RFID tracking capabilities, making it accessible for warehouse managers and logistics professionals.
The NETGEAR AXC761-10000S supports 10 Gigabit Ethernet standards over SFP+ connections, enabling high-speed data transmission for modern network infrastructure. Contact us today to verify compatibility with your specific network equipment and deployment requirements.
The SLS T-Series RFID Tunnel provides real-time verification of shipments by reading RFID tags as items or containers pass through the tunnel. This gives you immediate visibility into what was shipped according to what was ordered, reducing errors and enabling faster issue resolution.
Yes, the SLS D-500 is specifically designed to prevent cross-readings between reading sites. This capability makes it ideal for high-density dock environments where multiple RFID portals operate in close proximity.
The DTC4500e is available with both USB and Ethernet connectivity, allowing flexible integration into your existing network infrastructure. These dual connection options make it easy to deploy the printer in various environments, whether for direct computer connection or networked printing across your organization.
The SLS D-800 is designed for chokepoints where human intervention and manual barcode scanning is required, such as warehouse dock doors and receiving areas. It provides reliable RFID reading capabilities while allowing staff to perform additional verification or manual scanning tasks.
The SLS M-800 requires AC 110 power or PoE 802.3af (one unit). This flexible power configuration allows you to deploy the device in various warehouse locations with either standard electrical outlets or network-based power delivery.
Yes. SLS works directly with customers to design the T-Series tunnel solution tailored to their specific business processes and warehouse layout. Whether you're implementing RFID on an existing conveyor or building a new one, we can customize the solution to meet your operational needs. Visit barcodesinc.com or contact us today to discuss your requirements.
SLS VIEW is compliant with FCC, IC, and CE mark standards, ensuring it meets regulatory requirements for deployment in regulated environments. Contact us today to discuss compliance requirements for your specific application.
We offer the NETGEAR AXC761-10000S network cable as part of our comprehensive AIDC and networking product portfolio. Visit barcodesinc.com to check availability, pricing, and to place your order with our team.
The DTC4500e includes built-in security with password-protected printer operation to prevent unauthorized access and control. It also supports fluorescent panel printing, which provides a cost-effective and dynamic way to add additional security features to your ID cards. These features help protect against counterfeiting and enhance overall card security.
We offer the Lenovo InShelf 360 digital signage display as part of our comprehensive AIDC and retail technology solutions. Contact us today or visit barcodesinc.com to check availability, pricing, and to discuss which mounting configuration best fits your retail shelving system.
Yes, we offer the SLS D-800 RFID Dock Door as part of our comprehensive RFID solutions portfolio. Contact us today or visit barcodesinc.com to discuss your dock door RFID requirements and get a quote.
The SLS D-500 is designed for chokepoints where human intervention and manual barcode scanning are required, making it ideal for warehouse dock doors and receiving areas. Its PoE power design and high accuracy make it particularly well-suited for facilities looking to automate inventory capture without extensive electrical infrastructure changes. Contact us today to discuss your dock door RFID requirements.
If you're currently running an L2+ NETGEAR XSM7224S switch and need Layer 3 routing functionality, the XSM7224L-10000S upgrade license is the solution. Contact us today at barcodesinc.com to discuss your upgrade requirements, and our team can help you implement this license to enhance your network's routing and segmentation capabilities.
We offer the SLS M-Series RFID Mobile Solutions here at Barcodes Inc, your leading AIDC distributor. Contact us today at 1-833-299-1662 or visit barcodesinc.com to learn more about pricing, availability, and how this mobile solution can fit your inventory management needs.
The SLS M-800 operates on 902 MHz - 928 MHz (FCC) for North American deployments and 865 MHz - 868 MHz (ETSI) for European compliance. The device features multi-linear wave antenna polarization with 3 dBi gain and 50 Ohms impedance for optimal performance across regions.
The SLS D-Series uses Wave® Antenna technology with integrated antennas that uniformly illuminate space and cover all three tag orientations, resulting in tightly controlled read zones. This unique capability minimizes cross-reads between reading sites while maintaining high accuracy in rugged industrial environments subject to heavy traffic and forklift operations.
We offer the NETGEAR AXC763-10000S network cable as part of our comprehensive networking equipment selection. Visit barcodesinc.com or contact us today to check availability and pricing for your warehouse or IT infrastructure needs.
