The Byte Brothers RWC1000KCS can perform a myriad of cable and network tests needed to sustain a properly functioning network, while producing easy-to-read screens and reports. Detecting worn connectors, faulty terminations, noisy cables, and a host of other potential network issues, are just a few button presses away. The RWC1000KNP is the perfect tester for both LAN devices and UTP Cables. It also performs testing for coax cables and aTone Generator/Probe is included. The Real World Certifier tells you not only if your cable is wired correctly, but the speed at which your cable is capable of operating!
RWCs test for shorts, opens, length, map and cable quality as required by IEEE/ISO/IEC 802.3 standards. Measures cable propagation delay and skew in nano-seconds. Propagation delay is the time it takes for a data signal to travel the length of the cable. Skew is the difference in delay between pairs. A small skew insures that data, on each pair, will arrive at the receiver at about the same time. A large skew reading errors. RWCs meet IEEE/ISO/IEC 802.3 delay and skew specifications.
