SATO WWCL45900 Accessory

The Cisco C9200L-STACK-KIT includes two data stack adapters and one data stack cable, designed specifically for C9200L switch models. This kit enables you to stack multiple C9200L switches together to create a unified switching fabric. We offer this stack kit as part of our comprehensive Cisco networking accessories inventory.

The Cisco QSFP-4X10G-AOC10M is a 40GBASE Active Optical Cable breakout transceiver that converts a single QSFP port into four SFP+ ports, enabling 10 Gigabit connections over fiber optic cable. This module is ideal for high-density network deployments in data centers and enterprise environments where you need to maximize port density while maintaining reliable optical connectivity. We offer this transceiver module as part of our comprehensive Cisco networking inventory.

The Cisco QSFP-4X10G-AOC2M is a 40GBASE Active Optical Cable (AOC) transceiver that breaks out a single QSFP port into four 10G SFP+ connections. This module is ideal for data center and enterprise network environments where you need to expand port density or connect multiple 10 Gigabit devices through a single 40G interface. We offer this transceiver module as part of our comprehensive Cisco networking portfolio available from barcodesinc.com.

The C9200L-STACKKIT-RF is a stack kit designed specifically for Cisco Catalyst 9200L switches. It includes two data stack adapters and one data stack cable, allowing you to connect multiple C9200L switches into a unified stack for simplified management and increased throughput. We offer this accessory to expand your existing C9200L deployments.

The Cisco QSFP-4X10G-AOC1M is a 40GBASE Active Optical Cable breakout transceiver that converts a single QSFP port into four 10G SFP+ connections. This module is ideal for warehouse and logistics networks that need to expand port density while maintaining high-speed connectivity in data center and enterprise environments. We offer this transceiver module as part of our comprehensive Cisco networking inventory.

The C9300-NM-4M is a 4-port multigigabit network module designed for the Catalyst 9300 series switches, supporting flexible speeds including 100 Gbps, 40 Gbps, 25 Gbps, 10 Gbps, and 1 Gbps connectivity options. This modular design allows you to scale your network infrastructure based on your specific bandwidth requirements. We offer this module as part of our comprehensive Cisco networking solutions available from barcodesinc.com.

The Cisco C9300-NM-2Y is a Catalyst 9300 network module featuring 2 x 25GE (25 Gigabit Ethernet) ports with 25GBase-X optical connectivity. This module is designed for high-speed data networking applications and integrates seamlessly with Catalyst 9300 series switches. We offer this module as part of our comprehensive Cisco networking inventory at barcodesinc.com.

The Cisco QSFP-4X10G-AOC3M is a 40GBASE Active Optical Cable that breaks out a single QSFP port into four 10G SFP+ connections. This transceiver module is ideal for data center environments where you need to aggregate multiple 10 Gigabit connections or scale bandwidth on network devices that support QSFP interfaces. We offer this module as part of our comprehensive Cisco networking component inventory available from barcodesinc.com.

The Cisco QSFP-4X10G-AOC5M is a 40GBASE active optical cable breakout transceiver that converts a single QSFP port into four individual 10G SFP connections. This 5-meter cable is designed for high-density network deployments where you need to split a 40G connection into multiple 10G lanes, making it ideal for data center and enterprise network infrastructure. We offer this module as part of our comprehensive Cisco transceiver and cable inventory.

The Cisco QSFP-40G-SR4-RF is a 40GBASE-SR4 QSFP transceiver module designed for short-range optical network connections over multi-mode fiber. This hot-swappable module is ideal for high-speed data center and campus network deployments where 40 Gigabit Ethernet connectivity is required over shorter distances. We offer this transceiver module as part of our comprehensive Cisco networking components catalog.

The Cisco A9K-40GE-SE is a 40-port Gigabit Ethernet line card designed for high-performance network infrastructure. This Service Edge optimized module is ideal for warehouse networks, logistics operations, and enterprise environments requiring reliable, scalable connectivity for AIDC devices like barcode scanners and mobile computers. We offer this module as part of our comprehensive Cisco networking solutions available from barcodesinc.com.

The Cisco C9300-NM-8X-RF is a Catalyst 9300 network module featuring 8 ports of 10 Gigabit Ethernet connectivity. This module is designed for the Cisco Catalyst 9300 Series switches and provides high-speed data networking capabilities with SFP+ optical fiber connections. We offer this module as part of our comprehensive Cisco networking product lineup available from barcodesinc.com.

The Cisco A9K-40GE-TR is a 40-port Gigabit Ethernet line card designed for the Cisco ASR 9000 series packet transport platform. This module is ideal for service providers and enterprises requiring high-density 40 Gigabit Ethernet connectivity in core and edge routing environments. We offer this component as part of our comprehensive Cisco networking product lineup available from barcodesinc.com.

The Cisco C9300-NM-8X is a Catalyst 9300 network module featuring eight 10 Gigabit Ethernet ports with SFP+ connectivity. This module supports flexible uplink options and integrates seamlessly with the modular Catalyst 9300 platform to expand your switching capacity. Contact us today to verify exact specifications for your deployment.

The Cisco CGM-WPAN-OFDM-FCC is a Connected Grid Module that supports IEEE 802.15.4e/g standards for wireless connectivity. This module is designed for industrial and grid applications requiring reliable low-power wireless communication. We offer this module as part of our comprehensive Cisco wireless product lineup at barcodesinc.com.

The Cisco A9K-LC-FILR is a line card slot filler accessory designed for Cisco ASR 9000 Series routers. This component fills unused line card slots in the chassis, maintaining proper airflow and system integrity. We offer this genuine Cisco accessory as part of our comprehensive network equipment portfolio.

The Cisco CPAK-100G-LR4 is designed for long-range optical transmission over single-mode fiber (SMF) with a maximum distance of 10 kilometers. This makes it ideal for enterprise data center interconnects and campus network deployments where extended reach is required without signal degradation.

The Cisco A9K-LC-FILR-V2 is a line card slot filler designed for Cisco ASR 9000 series routers. It fills empty line card slots to maintain proper airflow and cooling within the chassis while keeping unused slots protected from dust and debris. We offer this essential accessory to help maintain optimal router performance and longevity.

The Cisco CGM-WPAN-FSK-NA is a Connected Grid Module that supports IEEE 802.15.4e/g wireless standards, designed for industrial and grid applications. This module enables reliable low-power mesh networking for IoT and connected device deployments. Contact us today to discuss how this module fits your wireless infrastructure needs.

The Cisco CFP-40G-SR4 is a 40GBASE-SR4 transceiver module designed for high-speed optical networking applications. This hot-swappable CFP module with MPO connector support enables 40 Gigabit Ethernet connectivity over multi-mode fiber, making it ideal for data center and enterprise network deployments requiring short-to-medium distance transmission.

The Cisco CFP-40G-LR4= is a 40GBASE-LR4 CFP transceiver module designed for high-speed optical networking applications. This module enables 40 Gigabit Ethernet connectivity over single-mode fiber optic cables, making it ideal for long-distance data center interconnects and enterprise network infrastructure. We offer this Cisco networking component as part of our comprehensive telecommunications products catalog.

The CPAK-100G-SR10 supports 100-meter maximum transmission distance over multimode fiber, making it ideal for shorter-range data center and campus network connections. This short-reach specification is optimized for high-density interconnect applications where extended distance capabilities are not required.

The Cisco CPAK-100G-SR4 is a 100 Gigabit optical transceiver module designed for high-speed data networking applications. This QSFP module supports 100GBase-SR4 connectivity over multimode fiber, making it ideal for short-reach optical network deployments. We offer this module as part of our comprehensive Cisco networking components inventory at barcodesinc.com.

The Dell WD15 Docking Station (452-BDDV) offers comprehensive connectivity with 5 USB ports (2x USB 2.0 and 3x USB 3.0), USB Type-C, Network (RJ-45), HDMI, VGA, Mini DisplayPort, and Audio Line Out. This multi-port design allows you to connect multiple peripherals simultaneously while supporting video output across different display standards. We offer this docking station as a complete solution for expanding your notebook or desktop connectivity.

The Dell 0X79H3 is a 300 GB hard drive with a 2.5" internal form factor, designed for high-performance storage applications. It operates at 10,000 rpm with SAS (6Gb/s) connectivity and features hot-swappable capability, making it ideal for enterprise servers and storage systems that require reliable, fast data access without downtime.

The Dell 342-0847 is a 600 GB hard drive with a 2.5" internal form factor, designed for server devices. It operates at 10,000 RPM using SAS (6Gb/s) interface and features hot-pluggable capability for seamless drive replacement without downtime. We offer this genuine Dell component as part of our comprehensive AIDC and storage solutions inventory.

The GENIUS-1602G-2D features an area-imaging engine that scans virtually all 1D and 2D barcodes with ease. The scanner supports all standard barcode symbologies and is GTIN compliant with GS1 DataBar capability, making it versatile for retail, warehouse, and field service applications. For a complete listing of all supported barcode symbologies, visit Honeywell's compliance documentation.

The Cisco CON-SW-C45X40XE is a 1-year SmartNet service contract for the Catalyst 4500-X 40-port 10G Enterprise switch. This contract provides comprehensive support and maintenance for your switch hardware, helping minimize downtime and ensuring optimal network performance. Contact us today to learn more about our Cisco service contract options available from Barcodes Inc.

The Cisco CP-HS-WL-5EC8= is an ear cushion spare part designed for the Cisco 560 series headset. This replacement cushion is ideal for maintaining comfort and audio quality when your original cushions wear out from regular use in warehouse, logistics, or contact center environments.

The Cisco HS-WL-730-BUNA-C is a wireless dual on-ear headset that connects via USB-A and Bluetooth, offering flexible connectivity for desk phone and computer environments. With a Bluetooth range of 213.3 feet, it provides reliable wireless coverage across typical office spaces. We offer this headset as part of our complete Cisco telecommunications accessories lineup available from barcodesinc.com.

The Cisco HS-WL-730-BUNA-P is a wireless dual on-ear headset with USB-A connectivity, designed for professional desk phone environments. It supports Bluetooth wireless connectivity with a range of up to 213.3 feet, making it ideal for mobile workers who need flexibility around their workspace. We offer this headset as part of our comprehensive Cisco telecommunications product lineup available from barcodesinc.com.

The Cisco HS-WL-730 features 802.11b/g Wi-Fi connectivity with Wi-Fi Multimedia (WMM) support for optimized voice quality. The headset also includes comprehensive Wi-Fi security options including WEP (64 or 128-bit), WPA (Personal and Enterprise), WPA2 (Personal and Enterprise), and Wi-Fi Protected Setup (WPS) to ensure secure connections in enterprise environments.

The Cisco PWR-IE65W-PC-DC is a 65W DC input power module designed for Cisco IE3000/IE3200 series switches, supporting DC input voltage ranges of 24-48VDC at 4.5A. This makes it ideal for industrial and remote deployment environments where DC power sources are standard. We offer this module as part of our comprehensive Cisco power supply inventory at barcodesinc.com.

The Cisco PWR-INJDC-30 is a DC Power over Ethernet (PoE) injector that delivers 30W of power output over standard Ethernet cabling. This accessory enables you to supply power to compatible network devices such as access points and IP phones without requiring separate power cables, simplifying deployment in warehouse and logistics environments. We offer this Cisco power injector as part of our comprehensive networking accessories catalog.

The Cisco PWR-IE65W-PC-AC is a 65W AC input power module designed for Cisco IE3000 and IE200 series industrial Ethernet switches. This PoE-capable power supply accepts AC input of 100-240V at 1.4A with 50-60Hz frequency, making it ideal for powering network infrastructure in industrial and enterprise environments. We offer this power module as part of our comprehensive Cisco telecommunications products lineup available from barcodesinc.com.

The Cisco PWR-RGD-AC-DC-RF supports a wide input voltage range of 88-300VDC and 85-264VAC, making it suitable for diverse power environments and international deployments. This dual-input capability ensures compatibility across different facility power standards and provides flexibility for both AC and DC power sources. We offer this power accessory as part of our comprehensive Cisco telecommunications product line.

The Cisco PWR-RGD-LOW-DC is a low DC power supply designed to support 24-60VDC input at 10A, making it ideal for applications requiring low-voltage DC power distribution. This power supply is specifically engineered for the Cisco CGR20 platform and delivers reliable power conversion for edge networking deployments. We offer this accessory as part of our comprehensive Cisco power supply inventory at barcodesinc.com.

The Cisco Redundant Power System 2300 (RPS 2300) is a compact 1-rack-unit power accessory that provides redundant power supply and seamless failover for critical network devices like Cisco Catalyst switches and integrated routers. It enhances network availability by ensuring uninterrupted operation and reducing risks associated with power supply failures, with a 60-microsecond failover capability to prevent switch reboot. The system can connect to up to six devices while backing up to two simultaneously, making it ideal for mission-critical applications requiring high availability.

The Cisco PWR-ME3KX-DC supports multiple power input options including AC input (100-240 VAC autoranging at 47-63 Hz), DC input (24Vdc to 60Vdc), and Power over Ethernet (PoE). This redundant power supply design ensures flexibility for various network environments and helps prevent downtime from power supply failures. We offer this spare part as a replacement accessory for compatible Cisco platforms.

The Cisco UCSC-PSU2V2-1400W delivers 1400 watts of AC power output, designed for 2U form factor servers and infrastructure. This V2 generation power supply is optimized for high-density computing environments requiring reliable power delivery. We offer this accessory as part of our comprehensive Cisco component inventory.

The Cisco UCSC-PSU1-1050W is a 1050W AC power supply designed for Cisco UCS rack-mounted servers and infrastructure. This power supply is engineered to deliver reliable, redundant power to enterprise-class computing environments where uptime and performance are critical. We offer this component as part of our comprehensive Cisco UCS accessories catalog to support data center and server deployments.

The Cisco UCSC-PSU2V2-650W is a 650W AC power supply designed for 2U C-Series servers in Cisco UCS environments. This V2 generation power supply delivers reliable redundant power for mid-range server deployments in data centers and enterprise infrastructure. We offer this accessory as part of our comprehensive Cisco spare parts inventory to support your existing server configurations.

The Cisco UCSC-PSU-930WDC-RF is a 930W 48V DC common slot power supply designed for Cisco UCS server environments. This power supply is optimized for data center deployments requiring reliable DC power distribution. Contact us today to verify compatibility with your specific UCS configuration.

The Cisco UCS-PSU-6332-AC is rated for 100-240VAC input, making it compatible with standard North American and international power systems. This wide input voltage range ensures reliable operation across different geographic locations and facility power configurations. We offer this accessory as part of our comprehensive Cisco UCS component inventory.

The Cisco UCSC-PSU1-770W-RF is a 770W AC hot-pluggable power supply designed for 1U C-Series rack servers. This wattage capacity makes it suitable for mid-range server configurations that require reliable, redundant power delivery. We offer this accessory as part of our comprehensive Cisco power supply inventory.

The Cisco UCSC-PSU3-2400W is a 2400W AC power supply designed for Cisco UCS (Unified Computing System) infrastructure. This power device is engineered to deliver reliable power to enterprise-grade computing systems in data centers and server environments. We offer this component as part of our comprehensive Cisco power supply inventory to support mission-critical deployments.

The Cisco UCS-PSU-6332-DC is designed for use with Cisco UCS 6332, 6454, and 64108 chassis. This -48VDC power supply is engineered to deliver reliable power to these enterprise-class data center switches. We offer this power supply as part of our comprehensive Cisco accessory inventory available from barcodesinc.com.

The Cisco XFP10GLR-192SR-L is a low-power multirate XFP transceiver module designed for 10 Gigabit Ethernet applications. This module supports multiple transmission standards including 10GBASE-LR for long-reach single-mode fiber deployments up to 10 km, making it ideal for extended network distances. We offer this accessory as part of our comprehensive Cisco networking components inventory at barcodesinc.com.

The Cisco XFP10GER-192IR-L is a low-power multirate XFP (10 Gigabit Small Form Factor Pluggable) transceiver module designed for 10GBASE-ER applications. This module supports 10 Gigabit Ethernet transmission over single-mode fiber (SMF) with a maximum transmission distance of 40 km, making it ideal for long-distance network connectivity in enterprise and carrier environments. We offer this accessory as part of our comprehensive Cisco networking components inventory available from barcodesinc.com.

The Cisco CPS-HD2T7KL12G is a 2 TB hard drive with 12G SAS interface, 7.2K RPM spindle speed, and large form factor (LFF) design. This drive is optimized for enterprise security appliance deployments requiring reliable, high-capacity storage. Contact us today to confirm compatibility with your specific Cisco security platform.

The Cisco CPS-UCSM4-2RU-K9 is a 2-rack unit (2RU) appliance designed for standard 19-inch EIA rack mounting. The unit measures 3.39 x 17.42 x 22.28 inches (8.61 x 44.25 x 56.59 cm) and is optimized for data center and enterprise security deployments where space efficiency is critical. We offer this appliance as part of our comprehensive Cisco security solutions portfolio.

The Cisco CTI-410V-VTS-K9 is a Cisco Multiparty Media 410v Server designed for enterprise video conferencing deployments. This system is ideal for organizations requiring scalable, reliable multiparty video communication across distributed teams and locations. We offer this equipment as part of our comprehensive Cisco video conferencing solutions available from barcodesinc.com.

The Cisco 15454-40-SMR1-C is a 40-channel Single Module ROADM (Reconfigurable Optical Add-Drop Multiplexer) with integrated functionality, designed for optical networking applications. This module enables flexible wavelength management and routing in metro and long-haul optical transport networks. We offer this Cisco component as part of our comprehensive optical networking inventory.

The Cisco QSFP-100G-SM-SR is designed for short-range multimode fiber connections with a maximum transmission distance of 70 meters over OM3 fiber and up to 100 meters over OM4 fiber. This makes it ideal for data center and campus network deployments where shorter distances are required. We offer this transceiver module as part of our comprehensive Cisco networking components inventory.

The Cisco DWDM-SFP10G-33.47 operates at 1533.47 nm wavelength and supports 10GBASE-DWDM connectivity over single-mode fiber (SMF). This wavelength is part of Cisco's Dense Wavelength Division Multiplexing (DWDM) portfolio, enabling high-density optical networking. We offer this module as a spare part for organizations requiring wavelength-specific transceiver replacements.

The Cisco DWDM-SFP10G-30.33 operates at 1530.33 nm wavelength and supports 10GBASE-DWDM transmission over single-mode fiber (SMF) with a maximum distance of 80 km. This makes it ideal for long-distance metropolitan and regional network deployments where dense wavelength division multiplexing is required.

The Cisco CFP-100G-SR10 is a 100GBASE-SR10 CFP transceiver designed for short-reach multimode fiber applications with a maximum transmission distance of 100 meters on OM3 cable. This makes it ideal for high-speed data center and campus network interconnections where longer distances aren't required. We offer this transceiver as part of our comprehensive Cisco networking solutions available from barcodesinc.com.

The Cisco DWDM-SFP10G-31.12 is a DWDM 10GBASE-X transceiver designed for long-distance single-mode fiber (SMF) communication. While specific distance ratings vary by wavelength configuration, DWDM transceivers in this series support extended reach capabilities ideal for metropolitan and long-haul network deployments. Contact us today for detailed distance specifications for your specific wavelength requirement.

The Cisco QSFP-100G-CWDM4-S= supports a maximum transmission distance of 2 kilometers over single-mode optical fiber. This makes it ideal for shorter-range data center interconnects and campus network deployments where extended reach isn't required. We offer this transceiver as part of our comprehensive Cisco networking components inventory.

The Cisco DWDM-SFP10G-32.68= operates at 1532.68 nm wavelength, making it part of Cisco's DWDM (Dense Wavelength Division Multiplexing) 10GBASE-X transceiver family. This wavelength is part of the C-band spectrum used in long-distance optical networking. We offer this module for organizations requiring high-capacity, wavelength-specific networking solutions.

The Cisco DWDM-SFP10G-31.90 operates at a wavelength of 1531.90 nm and is designed for 10GBASE-DWDM transmission over single-mode fiber (SMF). This module supports Digital Optical Monitoring (DOM) for real-time performance tracking and is rated for commercial temperature ranges, making it suitable for long-distance carrier-grade network deployments available from us.

The Cisco DWDM-SFP10G-55.75 is a 10GBASE-DWDM transceiver operating at 1555.75 nm wavelength, designed for dense wavelength division multiplexing applications on single-mode fiber. This module supports long-distance transmission typical of DWDM deployments in enterprise and carrier networks. Contact us today to verify specific distance specifications for your network topology.

The Cisco A9K-AC-PEM-V3 is an AC Power Enclosure Module Version 3 designed for Cisco ASR9K series routers. This power module provides reliable AC power distribution and management for high-performance edge and core routing platforms. We offer this module as part of our comprehensive Cisco networking accessories lineup to support mission-critical infrastructure deployments.

The Cisco C3KX-FAN-23CFM-RF is a remanufactured fan module accessory designed for Catalyst 3K-X series switches. This cooling fan module helps maintain optimal operating temperatures within your Cisco networking equipment, ensuring reliable performance and extended hardware lifespan in data center and enterprise environments.

The Cisco Catalyst 3850 network modules are available in three configurations: the C3850-NM-4-1G with 4 x Gigabit Ethernet ports, the C3850-NM-2-10G with 2 x 10 Gigabit Ethernet SFP+ and 2 x Gigabit Ethernet SFP ports, and the C3850-NM-4-10G with 4 x 10 Gigabit Ethernet SFP+ ports (supported on 48-port models only). All modules are hot swappable and can be mixed in various combinations to meet your network expansion needs. We offer all three configurations available from barcodesinc.com.

The Cisco C3650-STACK-KIT-RF is a stacking accessory designed to connect multiple Cisco Catalyst 3650 Series switches together, enabling them to operate as a single logical unit. This stacking capability provides simplified management, increased bandwidth, and redundancy for enterprise-class network deployments. We offer this component as part of our comprehensive Cisco networking accessory catalog to support your infrastructure expansion needs.

The Cisco C3850-NM-4-1G network module provides 4 x Gigabit Ethernet ports, making it ideal for organizations requiring standard Gigabit connectivity expansion on their Catalyst 3850 switches. This module is hot-swappable and can be combined with other network modules to create flexible port configurations. We offer this module as part of our complete Cisco networking solutions available from barcodesinc.com.

The Cisco DWDM-SFP10G-56.55 operates at 1556.55 nm wavelength and supports 10GBASE-DWDM transmission over single-mode fiber (SMF). This wavelength is part of Cisco's DWDM transceiver lineup, which enables dense wavelength division multiplexing for long-distance, high-capacity network deployments. Contact us today for detailed specifications and compatibility information for your network infrastructure.

The Cisco C3KX-NM-10GT-RF is a 10 Gigabit Ethernet network module designed for the Catalyst 3K-X switch platform, enabling high-speed data networking and optical connectivity. This module expands your switch's port capacity for enterprise data center and campus network deployments. We offer this module as part of our comprehensive Cisco networking solutions available from barcodesinc.com.

Yes, the GENIUS-1602G-2D is fully compatible with both Android and iOS devices via Bluetooth connectivity. It's MFi Certified for iOS compatibility and features Bluetooth v2.1 Class 2 wireless connectivity with a 10-meter (33 feet) range, making it ideal for tablet-based retail point-of-sale and field service applications. The scanner works seamlessly with BUYiQ software integration.

Yes, the Catalyst 4500-X 40-port 10G Enterprise switch is designed for enterprise deployments and can serve as an access, distribution, or server aggregation platform. The modular chassis design allows you to customize the switch with various line cards to meet your specific network requirements. We offer complete support and service contracts to keep your enterprise infrastructure running reliably.

The CP-HS-WL-5EC8= comes as an 8-pack of replacement ear cushions, providing multiple spares to extend the life of your Cisco 560 series headset across your team. This bulk quantity is cost-effective for organizations managing multiple headsets in warehouse or logistics operations.

Yes, the Cisco HS-WL-730-BUNA-C supports both Google Assistant and Siri, enabling hands-free voice control for calls and tasks. This makes it ideal for warehouse managers and logistics professionals who need to stay productive while managing multiple workflows. Contact us today to learn more about integrating this headset into your communication setup.

Yes, the Cisco HS-WL-730-BUNA-P is designed as a Cisco IP phone accessory and integrates seamlessly with Cisco desk phone systems and unified communications platforms. The headset's USB-A interface and Bluetooth capabilities ensure broad compatibility across Cisco's telecommunications ecosystem. Contact us today for specific compatibility verification with your existing Cisco phone infrastructure.

Yes, the Cisco HS-WL-730 is designed as a desk phone accessory and integrates with Cisco IP phone systems. The headset works with Cisco's telecommunications infrastructure and supports SIP third-party call control for server-based applications, making it suitable for enterprise desk phone deployments.

The Cisco PWR-INJDC-30 has been discontinued by the manufacturer. However, we maintain inventory of legacy Cisco networking components and can help you find compatible alternatives or refurbished units. Contact us today to discuss your power injection needs and explore current PoE injector options available from us.

Yes, the PWR-IE65W-PC-DC supports PoE (Power over Ethernet) functionality, allowing you to deliver both data and power through network cables to connected devices. The entire power budget for the switch and PoE ports must stay within the 65W power supply rating. Contact us today to verify compatibility with your specific switch model and deployment requirements.

The PWR-IE65W-PC-AC delivers 65W of power with AC input rated at 100-240V/1.4A (50-60Hz) or DC input at 125-250V/1.0A. This power supply is designed to support PoE functionality on compatible Cisco IE3000/200 switches, though the entire power budget for the switch and PoE ports must stay within the 65W wattage limit. Contact us today for detailed technical documentation and compatibility verification for your specific deployment.

The Cisco PWR-RGD-AC-DC-RF is designed as a power device accessory for Cisco telecommunications equipment and supports both AC and DC input specifications. For specific compatibility with your Catalyst switch model, we recommend contacting us today with your equipment details so our team can confirm the exact fit and power requirements for your infrastructure.

The PWR-ME3KX-DC delivers maximum power outputs of up to 540 watts with AC power supply, 574 watts with DC input, and supports up to 1040 watts maximum endpoint PoE power capacity with PoE boost. The typical power consumption without modules is 158 watts, making it suitable for high-density network deployments. Contact us today for specifications matching your specific Cisco platform requirements.

Yes, Cisco offers a hazardous location variant of this power supply designated as the PWR-RGD-LOW-DC-H, which is rated for 24-60V/10A in hazloc environments. This specialized version meets stringent safety requirements for explosive atmospheres and regulated industrial settings. Contact us today if you need hazloc-certified power supply solutions for your deployment.

The RPS 2300 supports various Cisco Catalyst switches including the 2960, 2950, and Express 500 Series (select PoE models), as well as Cisco Integrated Services Routers such as the 3825, 2851, 2821, and 2811 models. It is also compatible with Cisco Catalyst 3750-E and 3560-E Series Switches when equipped with appropriate modular power supplies. For specific compatibility verification with your network devices, contact us today to ensure proper integration.

The UCSC-PSU2V2-1400W is rated for 200 to 240V AC input, making it suitable for international data center deployments with standard high-voltage power infrastructure. This voltage range ensures compatibility with most enterprise power distribution systems. Contact us today for availability and compatibility verification with your specific equipment.

The UCSC-PSU1-1050W is designed for compatibility with specific Cisco UCS C-series and B-series rack and blade servers. To confirm compatibility with your exact server model, we recommend contacting us today with your system details, and our team can verify the proper fit and provide guidance on installation. Proper power supply selection is essential for optimal server performance and reliability.

The UCSC-PSU2V2-650W is specifically engineered for Cisco 2U C-Series servers and is part of the V2 power supply generation. Compatibility depends on your specific server model and generation—we recommend verifying your server's power supply specifications before ordering. Contact us today to confirm compatibility with your particular UCS configuration, and our team can help identify the right power supply for your infrastructure.

The UCSC-PSU-930WDC-RF is a common slot power supply compatible with select Cisco UCS server models. Compatibility depends on your specific UCS chassis and generation. We recommend contacting our team to confirm compatibility with your server configuration before ordering.

The UCSC-PSU1-770W-RF is specifically designed for 1U Cisco C-Series rack servers and features hot-pluggable functionality for seamless replacement without downtime. Compatibility depends on your specific server model, so we recommend verifying your system specifications before ordering. Contact us today to confirm compatibility with your infrastructure.

Yes, the UCS-PSU-6332-AC is specifically designed as a power supply accessory for Cisco UCS 6332 infrastructure equipment. This power device integrates seamlessly with UCS 6332 fabric interconnects and related unified computing components. Contact us today to verify compatibility with your specific UCS configuration.

The UCSC-PSU3-2400W accepts AC input voltage ranging from 100 to 240 VAC with autoranging capability, and operates at AC input frequencies between 47 to 63 Hz. The maximum AC input current range is 7.1 to 3.0A, with an AC input surge current rating below 50A. These specifications ensure compatibility with standard global power infrastructure available from us.

The Cisco UCS-PSU-6332-DC operates on -48VDC input, making it suitable for DC-powered data center environments where negative voltage distribution is standard. This DC power supply provides stable output for high-density switch deployments. Contact us today if you need technical specifications or compatibility verification for your specific infrastructure.

The XFP10GER-192IR-L is designed to work with single-mode fiber (SMF) cables, which are essential for achieving its 40 km transmission distance specification. Single-mode fiber is optimized for long-distance, high-speed data transmission and is the standard choice for enterprise backbone networks and carrier-class deployments. Contact us today if you need compatible SMF cabling solutions to pair with this transceiver.

The XFP10GLR-192SR-L supports 10GBASE-LR transmission with a maximum distance of 10 km over single-mode fiber (SMF), providing extended reach for metropolitan and campus network deployments. This makes it suitable for connecting distant network segments without requiring additional amplification or signal regeneration. Contact us today to verify compatibility with your specific network architecture.

Yes, the Cisco CPS-HD2T7KL12G is designed as a replacement or upgrade component for Cisco security appliances and physical security multiservices platforms. The 12G SAS interface ensures compatibility with modern Cisco security infrastructure. Visit barcodesinc.com or contact us today to verify compatibility with your exact appliance model.

The Cisco CTI-410V-VTS-K9 has been discontinued by the manufacturer. However, we may have refurbished or legacy units available in our inventory. Contact us today to inquire about availability, pricing, and alternative current-generation Cisco video conferencing solutions that meet your conferencing requirements.

The CPS-UCSM4-2RU-K9 supports multiple UCS-E compute modules, including Intel Broadwell-based options (6-core, 8-core, and 12-core configurations) with up to 128 GB RAM and 1-4 HDD/SSD storage, as well as Intel Icelake 10-core processors with up to 128 GB RAM and SSD storage. These modular compute options allow organizations to scale performance based on security and throughput requirements. Contact us today to discuss which compute configuration best fits your deployment needs.

The Cisco 15454 series equipment supports an ambient operating temperature range of 32° to 104°F (0° to 40°C), with non-operating storage temperatures ranging from -40° to 158°F (-40° to 70°C). This temperature specification ensures reliable operation in standard data center and controlled network environments. Contact us today for detailed environmental specifications for your deployment.

The QSFP-100G-SM-SR is a hot-swappable transceiver module that works with Cisco switches and routers equipped with QSFP ports supporting 100GBase-SR4 connections. Before purchasing, verify your equipment supports this specific transceiver type and that your optical fiber infrastructure uses multimode fiber (MMF). Contact us today if you need help confirming compatibility with your network infrastructure.

The CFP-100G-SR10 uses multimode fiber (MMF) cable, specifically OM3 grade, which is optimized for 100 Gigabit Ethernet short-reach applications. Multimode fiber is more cost-effective than single-mode fiber for shorter distances and is commonly deployed in data center environments. Contact us today to ensure you have the correct fiber infrastructure for your deployment.

The DWDM-SFP10G-31.12 is a Cisco-manufactured transceiver module designed for compatibility with Cisco switches and routers that support 10G SFP+ slots. This module features Digital Optical Monitoring (DOM) support for real-time performance monitoring and management. We recommend verifying your specific equipment model compatibility—visit barcodesinc.com or contact us today to confirm compatibility with your network infrastructure.

The Cisco QSFP-100G-CWDM4-S= features an LC duplex connector for optical fiber connections. This standard connector type ensures compatibility with most modern data center and campus network infrastructure. Contact us today for availability and technical specifications on this Cisco transceiver module.

Yes, the DWDM-SFP10G-30.33 is a Cisco-manufactured SFP+ module designed for Cisco switches and routers that support 10 Gigabit DWDM transceivers. We offer this module as a genuine Cisco spare part, ensuring full compatibility with your existing Cisco infrastructure. Contact us today to verify compatibility with your specific equipment model.

The DWDM-SFP10G-31.90 is a standard SFP+ transceiver module compatible with Cisco equipment and other vendors' 10G SFP+ ports that support DWDM wavelengths. It uses single-mode fiber connections and includes DOM support for network monitoring. Contact us today to verify compatibility with your specific switch models and network configuration.

The DWDM-SFP10G-33.47 transceiver is designed for single-mode fiber (SMF) cable and supports transmission distances of up to 80 kilometers, making it suitable for long-distance metro and regional network deployments. This extended reach capability allows warehouse and logistics operations to maintain high-speed 10 Gigabit connectivity across distributed facilities. Contact us today to confirm compatibility with your specific network infrastructure.

Yes, the Cisco DWDM-SFP10G-32.68= is designed for single-mode fiber (SMF) cable deployments, which is standard for long-distance, high-speed optical transmission. This makes it suitable for enterprise backbone networks and carrier-grade telecommunications infrastructure. Contact us today to verify compatibility with your specific network equipment.

The A9K-AC-PEM-V3 supports AC input voltage ranging from 100 to 240 VAC with autoranging capability and operates at 47 to 63 Hz input frequency. The module is designed to handle AC input current up to 7.1A maximum and includes surge protection rated under 50A. For detailed power capacity specifications relevant to your specific ASR9K configuration, contact us today for technical guidance.

Yes, all Cisco Catalyst 3850 network modules are hot swappable, allowing you to add or replace modules without powering down your switch. This design enables flexible network expansion and upgrades with minimal downtime in your data center or warehouse environment. Contact us today to discuss module configurations that fit your infrastructure requirements.

The Cisco C3650-STACK-KIT-RF includes data stack adapters and stacking cables available in multiple lengths, including 50 cm (default), 1 meter, and 3 meter options to accommodate various switch placement configurations. These cables ensure reliable high-speed interconnection between stacked switches in your network topology. Contact us today to confirm specific cable lengths available for your deployment scenario.

The C3850-NM-4-1G network module is designed for the Cisco Catalyst 3850 Series stackable switches and supports both 24-port and 48-port models. The module is hot-swappable, allowing you to install or replace it without downtime, and can be used in any combination with other compatible network modules. Contact us today for compatibility verification with your specific switch configuration.

The C3KX-FAN-23CFM-RF is specifically engineered for Catalyst 3K-X series switches. We recommend verifying your exact switch model against Cisco's compatibility documentation before ordering. Contact us today at barcodesinc.com if you need help confirming compatibility with your specific equipment.

The DWDM-SFP10G-56.55 is a Cisco-manufactured SFP+ module designed for 10 Gigabit Ethernet interfaces that support DWDM technology. Compatibility depends on your specific switch or router model and whether it has available SFP+ slots configured for DWDM operation. We recommend verifying your equipment's supported transceiver list or contacting our team to ensure proper compatibility before purchasing.

The DWDM-SFP10G-55.75 is a genuine Cisco transceiver module designed for compatibility with Cisco equipment supporting SFP+ form factor and 10 Gigabit Ethernet connectivity. This module includes Digital Optical Monitoring (DOM) support for real-time performance monitoring. Visit barcodesinc.com or contact us today to confirm compatibility with your specific Cisco platform.

The C3KX-NM-10GT-RF is specifically designed for the Catalyst 3K-X switch series and integrates into the available network module expansion slots. For compatibility verification with your specific switch model and configuration, contact us today—our team can confirm whether this module is the right fit for your infrastructure.

No, the C9200L-STACKKIT-RF is designed exclusively for C9200L SKUs. Cisco offers a separate C9200-STACK-KIT for standard C9200 switches, which includes the same components but is optimized for that product line. Using the correct stack kit ensures proper compatibility and performance.

The QSFP-4X10G-AOC2M features a 2-meter (approximately 6.56 feet) active optical cable length, making it suitable for short to medium-distance interconnects within data center racks and adjacent equipment. The AOC (Active Optical Cable) design allows for longer reach compared to copper alternatives while maintaining signal integrity. Contact us today for availability and to discuss cable length options if you need different configurations.

The QSFP-4X10G-AOC10M features a 10-meter (approximately 32.81 feet) active optical cable, making it suitable for medium-distance interconnects within data center environments and network closets. The extended length provides flexibility in rack and switch placement without requiring additional cable management infrastructure. Contact us today for availability and integration support with your network architecture.

The QSFP-4X10G-AOC1M is a 1-meter (approximately 3.28 feet) active optical cable, making it suitable for short to medium-distance interconnects within rack and cabinet deployments. The 1M length provides flexibility for typical data center spacing without excessive cable management complexity. Visit barcodesinc.com to verify current availability and specifications for your deployment needs.

No, the C9200L-STACK-KIT is designed exclusively for C9200L SKUs and is not compatible with the original C9200 switches. Cisco offers a separate C9200-STACK-KIT for the original C9200 models. Contact us today to ensure you order the correct stack kit for your switch model.

Yes, the C9300-NM-4M is specifically designed as a network module for the Catalyst 9300 modular platform, providing expansion slot capabilities for enhanced port density and throughput. The modular architecture of the C9300 series allows seamless integration of this 4-port mGig module. Contact us today to verify compatibility with your specific switch configuration and deployment requirements.

Yes, the C9300-NM-2Y is specifically designed as a network module for the Cisco Catalyst 9300 switch series. It provides 2 x 25GE expansion capability for organizations requiring additional high-speed uplink ports. Contact us today to verify compatibility with your specific Catalyst 9300 configuration.

The QSFP-4X10G-AOC3M features a 3-meter active optical cable length, making it suitable for medium-distance connections within data center racks and between adjacent equipment. This 3M length provides flexibility for typical server-to-switch or switch-to-switch deployments without requiring additional cable management. Contact us today for availability and to discuss cable length options for your specific network architecture.

The QSFP-40G-SR4-RF transceiver module is designed for multi-mode optical fiber connections, making it suitable for shorter-distance network runs typical in data centers and enterprise environments. The module features QSFP form factor connectivity and supports 40 Gigabit Ethernet speeds over multi-mode fiber infrastructure. Contact us today to verify compatibility with your existing fiber optic network setup.

The A9K-40GE-TR is specifically designed as an expansion module for Cisco ASR 9900 series routers and compatible packet transport platforms. Compatibility depends on your specific chassis model, available slot capacity, and software version. Contact us today to verify compatibility with your network infrastructure and ensure proper integration.

The QSFP-4X10G-AOC5M features a 5-meter (16.4 feet) active optical cable design, providing reliable fiber optic connectivity over extended distances within data center environments. The module connects one QSFP port on the source end to four SFP ports on the breakout end, supporting 40 Gbit/s aggregate throughput distributed across the four 10G channels. Contact us today to verify compatibility with your specific network infrastructure.

Yes, the C9300-NM-8X is designed specifically for the Catalyst 9300 modular switch platform and fits into the available expansion slots. The Catalyst 9300 series supports multiple network module options including 10G, 25G, and 40G configurations. Visit barcodesinc.com or contact us today to confirm compatibility with your specific switch model and configuration.

Yes, the C9300-NM-8X-RF is specifically designed as a network module for the Cisco Catalyst 9300 Series switches. It integrates seamlessly into the switch's expansion slots to provide additional 10GE port capacity. For compatibility verification with your specific switch configuration, contact us today and our team can confirm the exact requirements.

The A9K-40GE-SE operates reliably in normal conditions from 23° to 113°F (-5 to +45°C) at altitudes up to 6,000 feet, with extended operation possible up to 10,000 feet at slightly reduced temperatures. Storage temperature range is -40° to 158°F (-40° to 70°C), and the module maintains operation in relative humidity from 10% to 95% noncondensing. These specifications make it suitable for diverse warehouse and logistics environments. Contact us today for deployment guidance specific to your facility conditions.

This module features software-configurable transmit power to maximize range, multiple radio roles including access point and bridge configurations, and WMM certification for quality of service. It also includes Traffic Specifications Call Admission Control (CAC) to maintain voice quality and Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency in wireless networks.

This module features software-configurable transmit power to maximize range, supports multiple radio roles including access point, root bridge, nonroot bridge, and workgroup bridge configurations. It includes Wi-Fi Multimedia (WMM) certification and Traffic Specifications (TSPEC) Call Admission Control (CAC) to ensure quality of service for voice and critical applications. We offer this advanced module as part of our complete Cisco wireless solutions portfolio.

The CPAK-100G-SR10 is designed for multimode fiber (MMF) connectivity, which is the standard for short-reach 100G applications in modern data centers. We offer this transceiver module as part of our comprehensive Cisco networking solutions available from barcodesinc.com.

The Cisco CFP-40G-LR4= module supports 40GBase-LR4 technology with a maximum transmission distance of 9.98 kilometers over single-mode fiber. This extended range makes it suitable for campus networks and metropolitan area network (MAN) deployments where longer distances are required between network nodes. Contact us today to confirm specifications for your specific infrastructure requirements.

The CFP-40G-SR4 module is designed for multi-mode fiber (MMF) connectivity with an MPO connector interface. This configuration supports transmission distances suitable for intra-data center and campus network environments where multi-mode fiber infrastructure is already deployed.

The A9K-LC-FILR is specifically designed for Cisco ASR 9000 Series platforms that feature modular line card slots. Compatibility depends on your specific ASR 9000 model and chassis configuration. Contact us today to verify compatibility with your existing network infrastructure.

The CPAK-100G-LR4 transceiver module operates over single-mode fiber (SMF), which provides superior performance for long-distance, high-speed data transmission. Single-mode fiber is the standard choice for 100G optical networking in professional data center and telecommunications environments.

The A9K-LC-FILR-V2 is specifically designed for Cisco ASR 9000 series routers with available line card slots. Compatibility depends on your specific ASR 9000 model and chassis configuration. Contact us today to verify compatibility with your existing equipment and ensure proper installation.

The CPAK-100G-SR4 is designed for short-reach applications with a maximum transmission distance of approximately 100 meters over multimode fiber. This makes it suitable for data center interconnects and campus network environments where shorter distances are acceptable. Contact us today if you need guidance on selecting the right transceiver for your distance requirements.

Yes, the Dell WD15 is designed to work with Tablet PCs, Desktop PCs, and Notebooks, making it a versatile docking solution for multiple device types. The USB Type-C connection and broad port selection ensure compatibility across various Dell and compatible devices. Contact us today to verify compatibility with your specific device model.

The Dell 0X79H3 is a genuine Dell component compatible with Dell PowerEdge servers and storage systems that support 2.5" SAS drives. To verify compatibility with your specific server model, we recommend contacting us today—our team can confirm whether this drive will work with your existing infrastructure and help you find the right replacement or upgrade.

The Dell 342-0847 is engineered for server device support with its SAS 6Gb/s interface and 2.5" form factor, making it compatible with most Dell enterprise servers and compatible third-party systems that utilize SAS storage. For specific compatibility verification with your server model, contact us today and our team can confirm proper fit and performance.

The QSFP-4X10G-AOC2M is designed to work with Cisco switches, routers, and network devices that support QSFP ports and require 40GBASE connectivity with SFP+ breakout capability. Compatibility depends on your specific hardware model and software version, so we recommend verifying your equipment specifications before purchase. Visit barcodesinc.com or contact our team to confirm compatibility with your network setup.

The QSFP-4X10G-AOC10M is designed for Cisco network devices that support QSFP transceiver modules, including switches, routers, and network convergence systems with compatible QSFP ports. Before purchasing, verify that your equipment supports QSFP breakout modules and has the necessary software licensing for breakout functionality. Visit barcodesinc.com or contact our team to confirm compatibility with your specific network infrastructure.

The C9200L-STACK-KIT comes with a default 50 cm data stack cable, but options of 1 meter and 3 meter cables are also available from us. This flexibility allows you to configure your switch stack architecture based on your physical rack layout and spacing requirements.

The Cisco C3KX-NM-10GT-RF supports 10 Gigabit Ethernet connectivity with SFP+ (mini-GBIC) optical transceiver slots, allowing flexible fiber optic deployment. This enables you to leverage single-mode or multi-mode fiber for long-distance, high-speed data transmission in your network backbone. Visit barcodesinc.com to explore compatible SFP+ transceiver options available from us.

Yes, the QSFP-4X10G-AOC1M is designed to work with Cisco network devices equipped with QSFP ports and supporting 40G breakout functionality. Compatibility depends on your specific switch model and firmware version supporting 4x10G breakout mode. Contact us today to verify compatibility with your existing infrastructure before purchasing.

The C9200L-STACKKIT-RF comes with a default 50 cm data stack cable. However, we also offer extended cable options of 1 meter and 3 meters to accommodate different rack configurations and switch spacing requirements in your data center environment.

The C9300-NM-2Y utilizes 25GBase-X optical fiber connectivity with SFP28 transceiver slots, enabling 25 Gigabit Ethernet performance. This optical-based design provides superior performance for long-distance data center and campus network deployments. Visit barcodesinc.com to explore compatible SFP28 transceivers available from our team.

This network module is ideal for enterprise data center environments, campus networks, and high-performance computing facilities requiring flexible gigabit and multigigabit uplink capabilities. The module supports advanced features including MACsec encryption, IPsec, and cloud-managed monitoring through Meraki, making it suitable for security-conscious organizations. We can help you determine if this module meets your specific networking and security requirements—visit barcodesinc.com or contact our team today.

The QSFP-4X10G-AOC3M is designed for Cisco network devices with QSFP ports, including routers, switches, and network convergence systems that support 40G QSFP interfaces. Compatibility depends on your specific equipment model and firmware version, so we recommend verifying your device specifications before purchase. Our team at barcodesinc.com can help you confirm compatibility with your existing infrastructure.

Yes, the Cisco QSFP-4X10G-AOC5M is specifically engineered for data center and enterprise network applications where port density and flexibility are critical. The active optical design ensures signal integrity over the 5-meter distance, making it suitable for high-performance network deployments that require breaking out a single high-speed connection into multiple lower-speed ports. Visit barcodesinc.com or contact us today to discuss your network requirements.

The C9300-NM-8X provides eight 10 Gigabit Ethernet ports, delivering 10 Gbps per port connectivity through SFP+ optical interfaces. The Catalyst 9300 platform also supports additional network modules with speeds ranging from 1 Gbps to 100 Gbps depending on the module type selected. We offer a full range of compatible modules to match your bandwidth requirements.

The C9300-NM-8X-RF delivers 10 Gigabit Ethernet (10GBase-X) performance across all 8 ports, making it suitable for high-bandwidth enterprise applications. This speed tier is ideal for data center interconnects, core network aggregation, and environments requiring reliable multi-gigabit throughput. Visit barcodesinc.com or contact us for deployment recommendations specific to your infrastructure.

The A9K-40GE-TR provides 40 Gigabit Ethernet ports with support for 40GBase-X optical connectivity using QSFP28 transceiver modules. The line card supports standard IEEE 802.3ba 40-Gbps Ethernet specifications and includes IEEE 802.x flow control for optimized network performance. Visit barcodesinc.com for detailed transceiver compatibility information.

Yes, the Cisco QSFP-40G-SR4-RF is a hot-swappable transceiver module, allowing you to install, replace, or remove it without powering down your network equipment. This feature minimizes downtime during maintenance, upgrades, or troubleshooting in production network environments. We stock this hot-swappable module to support your network infrastructure needs.

Yes, the A9K-40GE-SE is designed to occupy one slot in compatible Cisco Catalyst switch platforms, with physical dimensions of 1.6 x 14.92 x 14.57 inches. The module integrates seamlessly into enterprise network architectures supporting warehouse management systems and logistics operations. Visit barcodesinc.com or contact us today to verify compatibility with your specific switch configuration.

This module carries FCC approval for use in the United States, as indicated by the FCC designation in the part number. Cisco products comply with various international standards including EN 300.328 and EN 301.893 for Europe, ARIB standards for Japan, and AS/NZS standards for Australia and New Zealand. Customers should verify approval for their specific country of use on Cisco's compliance website.

The CFP-40G-SR4 is compatible with Cisco networking equipment that features CFP module slots and supports 40GBASE-SR4 optical standards. We recommend verifying your specific hardware's compatibility with CFP form factor modules before purchase. Contact us today for detailed compatibility information for your network infrastructure.

Yes, the CPAK-100G-LR4 is a hot-swappable transceiver module, allowing you to install or replace it without powering down your network equipment. This design minimizes downtime during maintenance and upgrades in production environments.

The CPAK-100G-SR10 operates within the standard commercial temperature range of 5 to 40°C (41 to 104°F), with storage capability from -40 to 70°C (-40 to 158°F). These specifications ensure reliable performance in controlled data center environments.

The A9K-LC-FILR-V2 installs directly into empty line card slots on your ASR 9000 chassis without requiring additional tools or configuration. Installation is straightforward and can be completed by your IT or network team during routine maintenance. Visit barcodesinc.com or contact us today for detailed installation guidance specific to your router model.

Yes, the Cisco CFP-40G-LR4= is a hot-swappable, plug-in module that can be installed or removed without powering down your equipment. This design feature minimizes network downtime during maintenance, upgrades, or troubleshooting activities. We stock these modules to support your network infrastructure needs with minimal service interruption.

The Cisco CGM-WPAN-FSK-NA is designed to integrate with Cisco's wireless infrastructure ecosystem, though specific controller compatibility depends on your deployment architecture. For detailed compatibility information with your existing Catalyst 9800 Series or other wireless controllers, contact us today and our team can provide configuration guidance for your specific setup.

Line card slot fillers are essential for maintaining proper chassis cooling and system performance in modular routers. By filling unused slots, the filler ensures optimal airflow distribution across active line cards and prevents dust accumulation inside the chassis. This helps extend equipment lifespan and maintain reliable network operations.

Yes, the CPAK-100G-SR4 is a Cisco-manufactured QSFP transceiver module designed for compatibility with Cisco's 100 Gigabit Ethernet-capable switches and networking equipment. As a hot-swappable module, it integrates seamlessly into supported Cisco platforms. Visit barcodesinc.com or contact us today to verify compatibility with your specific Cisco equipment.

The Dell WD15 Docking Station delivers 130W of power, providing sufficient capacity to charge and operate most notebooks and connected peripherals simultaneously. This power delivery supports demanding workflows without requiring additional power adapters for connected devices. Visit barcodesinc.com for detailed power specifications and compatibility information.

The 10,000 rpm speed and SAS 6Gb/s interface provide the performance needed for demanding data center workloads, while the hot-swappable design allows technicians to replace the drive without powering down the system. This minimizes downtime and is essential for mission-critical warehouse management and logistics operations that require continuous availability.

The 10,000 RPM speed and hot-pluggable design make the Dell 342-0847 ideal for high-performance server environments common in warehouse management systems and logistics operations. Its enterprise-grade SAS interface ensures reliable data access for mission-critical RFID, barcode scanning, and inventory management applications. Visit barcodesinc.com to explore how this drive integrates with our complete AIDC solutions.

The GENIUS-1602G-2D delivers up to 2,250 scans per full charge with an expected 12 hours of operation time. The scanner features a 750 mAh Li-ion battery that fully charges in approximately 3 hours, providing all-day productivity for warehouse and retail environments.

The Catalyst 4500-X 40-port model provides 40 ports of 10 Gigabit Ethernet connectivity, enabling high-speed data transfer for demanding enterprise environments. The switch supports flexible line card options including 48-port 10/100, 10/100/1000, and Power over Ethernet configurations. Visit barcodesinc.com to view detailed specifications or contact our team for custom configuration assistance.

The Cisco CP-HS-WL-5EC8= ear cushions feature foam construction designed for comfort during extended wear. The foam material helps maintain a secure fit while providing cushioning for all-day use in demanding warehouse and logistics environments.

The Cisco HS-WL-730-BUNA-P delivers professional audio performance with a 32 Ohm impedance and frequency response of 20 Hz to 20 kHz, supporting both stereo and binaural listening modes for clear voice communications. The dual on-ear design with ear-cup construction provides comfort during extended call sessions while maintaining audio fidelity. Visit barcodesinc.com to learn more about our complete selection of Cisco headsets and accessories.

The Cisco HS-WL-730-BUNA-C delivers stereo audio with a frequency response of 20 Hz to 20 kHz and 32 Ohm impedance, ensuring clear voice calls and multimedia audio. It features MEMS technology microphone for reliable audio capture in professional environments. Available from us at barcodesinc.com with full technical specifications.

The Cisco HS-WL-730 operates reliably in temperatures ranging from 23 to 113°F (-5 to 45°C), with non-operating temperature tolerance from -13 to 158°F (-25 to 70°C). The device supports non-operating humidity levels of 10 to 90% non-condensing, making it suitable for standard office environments.

The 30W output rating of the PWR-INJDC-30 makes it suitable for powering Cisco Aironet access points, IP phones, and other PoE-compatible network devices that require up to 30 watts. The injector supports standard Ethernet connectivity over Category 5 cabling with cable runs up to 100 meters. For specific device compatibility verification, contact us today and our team can confirm compatibility with your equipment.

The PWR-IE65W-PC-DC accepts DC input (24-48VDC at 4.5A), while the PWR-IE65W-PC-AC accepts AC input (100-240V at 1.4A, 50-60Hz) or DC input (125-250V at 1.0A). Choose the DC model for industrial environments with DC power infrastructure, and the AC model for standard commercial AC power environments. Visit barcodesinc.com to compare specifications and find the right power module for your installation.

AC/DC dual-input power supplies like the PWR-RGD-AC-DC-RF offer greater flexibility by accepting both alternating current (85-264VAC) and direct current (88-300VDC) inputs, whereas AC-only models are limited to standard wall power. This dual capability is particularly valuable in data centers and telecommunications facilities where backup power systems or DC-powered infrastructure may be present. We offer both AC-only and AC/DC models to match your specific power infrastructure needs.

The PWR-IE65W-PC-AC is specifically engineered for Cisco IE3000 and IE200 series industrial Ethernet switches. While Cisco offers alternative power modules like the PWR-IE170W-PC-AC (170W) and PWR-IE240W-PCAC-L (240W) for higher-power requirements, compatibility depends on your specific switch model and power budget needs. Visit barcodesinc.com or contact us today to confirm compatibility with your equipment.

Yes, the PWR-ME3KX-DC is designed as a redundant power supply that provides seamless failover protection for Cisco switches and routers. This redundancy architecture helps ensure uninterrupted operation and protects against device power supply failures in mission-critical converged data, voice, and video networks. Visit barcodesinc.com to verify compatibility with your specific Cisco platform.

The RPS 2300 supports two modular power supply options: the C3K-PWR-1150WAC (1150W maximum output) and the C3K-PWR-750WAC (750W maximum output). The system can operate with either one or two power supplies of the same type installed, allowing you to configure backup capacity based on your network requirements. When two 1150W supplies are installed, the RPS 2300 can actively back up two Catalyst 3750E or 3560E switches simultaneously.

The PWR-RGD-LOW-DC is a dedicated low-voltage DC power supply (24-60VDC), whereas Cisco's AC/DC alternatives like the PWR-RGD-AC-DC-250 and PWR-RGD-AC-DC-400 support both AC input (100-240VAC) and higher DC ranges (100-250VDC or 100-250VDC at 400W). Choose the PWR-RGD-LOW-DC when your infrastructure uses low-voltage DC power distribution; select AC/DC models for facilities requiring input voltage flexibility. Visit barcodesinc.com to compare all available Cisco power supply options for your specific requirements.

Yes, the UCSC-PSU2V2-1400W is designed for Cisco UCS C-Series 2U servers as a replacement or redundant power supply module. The V2 designation indicates this is the second generation of this power supply, offering improved efficiency and reliability for mission-critical deployments. Visit barcodesinc.com to verify compatibility with your specific server model.

The UCSC-PSU1-1050W delivers 1050 watts of AC power output, making it suitable for high-performance server configurations requiring substantial power capacity. This wattage rating supports multi-processor systems with GPU acceleration and memory-intensive workloads common in enterprise data centers. Visit barcodesinc.com or contact us today for detailed electrical specifications and installation requirements.

The UCSC-PSU2V2-650W delivers 650W of AC power output, designed to support demanding server workloads in 2U chassis configurations. This power supply is rated for enterprise-grade reliability and redundancy in data center environments. For detailed electrical specifications and environmental operating conditions, visit barcodesinc.com or contact our team for complete technical documentation.

This 930W DC power supply is ideal for enterprise data centers, high-density server environments, and mission-critical applications requiring redundant power configurations. The 48V DC input makes it suitable for facilities with established DC power infrastructure. Visit barcodesinc.com or contact us to discuss your specific power supply requirements.

The UCS-PSU-6332-AC utilizes an IEC 320-C14 power input receptacle, which is the standard three-pin connector found on most enterprise networking and computing equipment. This connector type ensures broad compatibility with standard power distribution infrastructure in data centers and server rooms. We stock this power supply with all necessary connectors and cabling options.

Hot-pluggable power supplies like the UCSC-PSU1-770W-RF allow you to replace failed units without powering down the server, minimizing downtime in production environments. This is critical for warehouse management systems, logistics networks, and other mission-critical applications where continuous uptime is essential. We stock hot-pluggable options to support your redundancy requirements.

Yes, the UCSC-PSU3-2400W is designed as a redundant power supply unit for Cisco UCS systems, providing high availability and fault tolerance in enterprise environments. Redundant power supply configurations help ensure continuous operation even during single power supply failures. Contact us today to discuss redundancy options and system design for your infrastructure needs.

The XFP10GLR-192SR-L is designed to work with Cisco equipment supporting XFP transceiver modules and 10 Gigabit Ethernet standards. Compatibility depends on your specific switch or router model and its transceiver slot configuration. We recommend consulting your equipment documentation or contacting our team at barcodesinc.com to confirm compatibility before ordering.

The XFP10GER-192IR-L is classified as an industrial-rated module (indicated by the 'I' designation in its part number), meaning it supports an extended operating temperature range suitable for harsh environments. This makes it appropriate for outdoor installations, remote data centers, and industrial networking applications where temperature fluctuations are a concern. Visit barcodesinc.com to verify current availability and environmental specifications for your specific deployment requirements.

The Cisco UCS-PSU-6332-DC is currently listed as discontinued. However, we maintain inventory of compatible Cisco power supply alternatives for UCS platforms, including AC and DC options across various wattage ratings. Visit barcodesinc.com or contact us today to explore compatible replacement power supplies for your Cisco UCS infrastructure.

The CPS-HD2T7KL12G features a large form factor (LFF) design with 12G SAS (Serial Attached SCSI) interface, making it suitable for high-performance enterprise environments. The 7.2K RPM speed balances performance and reliability for continuous security appliance operation. We offer this drive as part of our comprehensive Cisco component inventory.

Yes, the platform supports extensive voice integration through multiple Network Interface Modules (NIMs) and Service Modules, including FXO/FXS ports, BRI interfaces, and high-density voice DSP modules ranging from 32 to 3,080 channels. This makes it suitable for unified communications deployments that require integrated security and voice services. Visit barcodesinc.com to explore voice module compatibility options available from us.

Cisco offers a range of TelePresence integration kits and accessories including the CTS-SX20N series, CTS-SX80 series, and specialized configurations like the CTS-SX80-IPST60-K9. These accessories enhance connectivity, camera capabilities, and conference room integration. Visit barcodesinc.com to explore compatible accessories or contact our team for recommendations on which integration kits best suit your video conferencing infrastructure.

The Cisco QSFP-100G-SM-SR requires multimode optical fiber (MMF) with an MPO connector interface for 100 Gigabit Ethernet connectivity. The transceiver supports both OM3 and OM4 grade multimode fiber, with transmission distances varying based on the fiber grade used. Visit barcodesinc.com to explore compatible fiber optic cables and accessories for your deployment.

The Cisco 15454 series meets comprehensive safety and EMC compliance standards including UL 60950, CE Marking, EN 60950, IEC 60950, FCC Part 15 Class A, and EN 55022 Class A. These certifications ensure the equipment meets international safety, electromagnetic compatibility, and regulatory requirements for network deployment. We provide fully compliant equipment available from our inventory.

DWDM transceivers in this series are engineered for extended-range transmission over single-mode fiber, supporting distances up to 80 km depending on the specific wavelength and network conditions. The 1532.68 nm wavelength variant is optimized for long-haul optical networks where signal integrity over extended distances is critical. Visit barcodesinc.com or contact us today for detailed distance specifications for your deployment.

Yes, the DWDM-SFP10G-33.47 includes Digital Optical Monitoring (DOM) support, enabling real-time monitoring of optical signal parameters such as power levels and transceiver temperature. DOM capability is essential for proactive network management and troubleshooting in enterprise environments. Visit barcodesinc.com to learn more about our transceiver offerings with advanced monitoring features.

The Cisco DWDM-SFP10G-31.12 operates over single-mode fiber (SMF) cable, which is the standard for long-distance, high-speed optical transmission. SMF provides superior performance for 10 Gigabit Ethernet applications compared to multimode fiber, making it ideal for enterprise backbone and carrier-class networks. We offer compatible SMF patch cables and can assist with your complete fiber infrastructure needs.

The DWDM-SFP10G-30.33 requires single-mode fiber (SMF) cabling to achieve its full 80 km transmission range. Single-mode fiber is essential for long-distance DWDM applications because it minimizes signal dispersion and supports the narrow wavelength channels used in dense wavelength division multiplexing.

DWDM (Dense Wavelength Division Multiplexing) modules like the DWDM-SFP10G-31.90 use tightly spaced wavelengths to maximize channel capacity over single-mode fiber, supporting longer distances and higher density deployments. CWDM (Coarse Wavelength Division Multiplexing) uses wider wavelength spacing, making it more cost-effective for shorter distances but with fewer channels. We offer both DWDM and CWDM options to match your specific network requirements.

No, the CFP-100G-SR10 is specifically designed for short-reach applications with a 100-meter maximum distance on OM3 multimode fiber. For longer-distance links beyond 100 meters, you would need single-mode fiber transceivers with greater reach capabilities. Our team can help you select the appropriate Cisco transceiver for your specific distance and application requirements—visit barcodesinc.com or contact us today.

Yes, the Cisco QSFP-100G-CWDM4-S= is a hot-swappable transceiver module, allowing you to install or replace it without powering down your network equipment. This feature minimizes downtime during maintenance and upgrades in production environments. Visit barcodesinc.com to explore our full selection of hot-swappable Cisco transceiver modules.

The C3850-NM-4-10G provides four 10 Gigabit Ethernet SFP+ ports and is supported only on 48-port Catalyst 3850 models, while the C3850-NM-2-10G offers two 10 Gigabit Ethernet SFP+ ports combined with two Gigabit Ethernet SFP ports for mixed-speed deployments. The 4-port module is ideal for high-bandwidth applications, while the 2-port module provides flexibility for gradual network upgrades. Visit barcodesinc.com to find the right module for your topology.

The DWDM-SFP10G-55.75 is designed for use with single-mode fiber (SMF) cable, which is standard for long-distance DWDM applications. Single-mode fiber minimizes signal degradation over extended transmission distances, making it ideal for metropolitan and wide-area network deployments. We offer compatible fiber optic cabling solutions—visit barcodesinc.com for options.

Remanufactured means this fan module has been professionally restored to like-new condition, tested for performance, and certified to meet Cisco's original specifications. Remanufactured accessories offer significant cost savings compared to new units while maintaining full functionality and reliability for your network infrastructure.

The C3850-NM-4-1G provides 4 x Gigabit Ethernet ports for standard connectivity, while the C3850-NM-2-10G offers hybrid connectivity with 4 x Gigabit Ethernet ports plus 2 x 10 Gigabit Ethernet SFP+ ports for higher-speed requirements. The 10G module supports both 10 Gigabit and Gigabit Ethernet SFP transceivers, allowing flexible upgrades as your network demands evolve. We have both options available from us to match your bandwidth and budget requirements.

The DWDM-SFP10G-56.55 requires single-mode fiber (SMF) for optimal performance and long-distance transmission capabilities. Single-mode fiber is essential for DWDM applications as it supports the precise wavelength channels needed for dense wavelength multiplexing. Visit barcodesinc.com or contact us to find compatible fiber cabling solutions for your deployment.

The A9K-AC-PEM-V3 is specifically engineered for Cisco ASR9K series routers and may not be compatible with other Cisco platform families. Compatibility depends on your exact router model and chassis configuration. Contact us today to verify compatibility with your specific Cisco equipment and ensure you select the correct power module for your deployment.

The C3650-STACK-KIT-RF is specifically designed for Catalyst 3650 Series switches and should not be used with the Catalyst 3850 Series, which requires different stacking accessories. For Catalyst 3850 deployments, separate stacking kits and cables are available. We recommend verifying your switch model before ordering to ensure compatibility—visit barcodesinc.com or contact our team for guidance on the correct accessories for your equipment.

The GENIUS-1602G-2D has a depth of field ranging from 44mm to 115mm (1.7" to 4.5") for 5 mil Code 39 barcodes at optimal focus. It supports motion tolerance up to 10 cm/s (4 in/s) for 13 mil UPC codes and features a horizontal scan angle of 41.4° and vertical scan angle of 32.2°, enabling fast and reliable scanning from multiple angles.

The Catalyst 4500-X supports industry-standard protocols including IEEE 802.1q VLAN, 802.3ad Link Aggregation, 802.1x Port Access Authentication, Spanning Tree Protocol, and IGMP snooping. It also includes advanced management capabilities through SNMP v3, embedded GUI, and device-level management tools. Our team can help you configure these features to optimize your network architecture.

The Cisco HS-WL-730-BUNA-P operates reliably in temperatures between 23°F to 113°F (-5°C to 45°C), with a non-operating temperature range of -13°F to 158°F (-25°C to 70°C). This temperature specification makes it suitable for standard office environments and controlled warehouse or logistics facilities. We offer detailed environmental specifications for all Cisco products available from us.

The HS-WL-730-BUNA-C is a dual on-ear design with USB-A connectivity, distinguishing it from single on-ear models like the HS-WL-721-BUNAS-C and true wireless earbuds like the HS-WL-950-BUN-C. The dual on-ear configuration provides binaural audio for stereo listening, making it suitable for both calls and multimedia work. We offer multiple Cisco headset options to match different workplace communication needs.

The CP-HS-WL-5EC8= is specifically designed as a spare part for the Cisco 560 series headset. We recommend verifying compatibility with your specific headset model before ordering to ensure proper fit and performance. Contact us today if you need help identifying the right replacement cushions for your headset.

The Cisco HS-WL-730 includes a 10/100 PC switch port that enables LAN connectivity to a co-located PC, allowing you to connect both the desk phone and computer to the same device. You can designate separate VLANs (802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic.

The PWR-IE65W-PC-DC power module is designed for Cisco IE3000 and IE3200 series industrial Ethernet switches. These rugged switches are built for harsh environments and demanding industrial applications. Contact us today to confirm compatibility with your specific switch model and to ensure proper power supply sizing for your network deployment.

Cisco offers both AC and DC variants of their IE power modules to accommodate different infrastructure environments. The PWR-IE65W-PC-AC accepts AC input (100-240V), while the PWR-IE65W-PC-DC accepts DC input (24-48VDC), allowing you to choose based on your facility's power distribution system. Both variants deliver the same 65W output capacity and PoE support, so selection depends on whether your installation uses AC or DC power infrastructure. We stock both variants—contact us today to order the right module for your network.

The 30W output of the PWR-INJDC-30 provides significantly more power capacity than standard 15W PoE injectors, allowing you to support higher-power devices or multiple devices in some scenarios. The 30W rating ensures adequate power delivery for demanding network equipment in warehouse and logistics operations where reliable access point performance is critical. Available from us are various Cisco PoE injector models to match your specific power requirements.

The Cisco PWR-RGD-AC-DC-RF is a power device accessory designed to support Cisco equipment in various deployment scenarios, including redundant power setups common in enterprise telecommunications. Its dual AC/DC input capability makes it well-suited for environments requiring failover between primary and backup power sources. Contact us today to discuss your redundancy requirements and ensure proper configuration for your network infrastructure.

The PWR-ME3KX-DC features input surge current protection rated at less than 50 amps for both AC and DC inputs, providing robust protection against electrical transients. The AC input current range is 7.1 to 3.0 amps maximum, while DC input current ranges from 33.2 to 12.4 amps. This protection helps safeguard your network infrastructure from power anomalies.

The number of devices the RPS 2300 can back up depends on its configuration and power supply type. With dual 1150W power supplies, it can back up two Catalyst 3750E or 3560E switches, or two of any other supported network devices. With a single 1150W supply, it backs up one device, while dual 750W supplies can back up two non-3750E/3560E devices. Visit barcodesinc.com or contact us today to determine the optimal configuration for your specific network topology.

Cisco power supplies, including the PWR-RGD-LOW-DC, are backed by a five-year limited hardware warranty covering defects in materials and workmanship. This comprehensive warranty ensures protection for your critical power infrastructure investment. Contact us today for warranty registration and support details.

The UCSC-PSU2V2-1400W represents the V2 generation with enhanced power efficiency and thermal management compared to earlier 1400W models. The improved design delivers the same 1400W output while reducing heat generation and improving overall system reliability. We stock both current and legacy Cisco power supplies—contact us today to compare specifications for your infrastructure needs.

The 1050W capacity of the UCSC-PSU1-1050W provides significantly more power headroom compared to 770W or 450W alternatives, making it ideal for servers with multiple processors, high memory configurations, or GPU accelerators. If you're uncertain whether you need the 1050W model or a lower-capacity option, our team can assess your specific workload requirements. Contact us today to discuss the right power supply for your infrastructure needs.

The UCSC-PSU2V2-650W provides 650W of power output, while the UCSC-PSU2V2-1400W offers double the capacity at 1400W for more power-intensive server configurations. Your choice depends on your server's power requirements and workload demands—higher-wattage supplies are needed for servers with multiple processors, GPUs, or memory-intensive applications. We offer both models available from us, so contact us today to determine which power supply best fits your infrastructure needs.

The UCSC-PSU-930WDC-RF may serve as a replacement for compatible legacy Cisco power supplies, but compatibility varies by UCS generation and model. We offer a range of Cisco power supplies including the UCSC-PSU1-1050W and UCSC-PSU2V2-1400W for different server configurations. Contact us today to determine the correct replacement for your equipment.

The Cisco UCSC-PSU3-2400W delivers 2400W of maximum power output for AC-powered Cisco UCS systems. This 2400W capacity supports demanding computational workloads and multiple blade servers within a UCS chassis. Visit barcodesinc.com or contact us today to verify compatibility with your specific UCS configuration.

The 770W capacity sits in the mid-range of Cisco's power supply offerings—smaller units like the 450W and 650W models are available for lower-power configurations, while 1050W and 1400W models serve higher-demand systems. Choosing the right wattage depends on your server's CPU, memory, and expansion card configuration. Visit barcodesinc.com to explore our full range of Cisco power supplies and find the right fit for your deployment.

The UCS-PSU-6332-AC is specifically engineered for UCS 6332 platforms and should not be used as a generic replacement for other Cisco power supplies without verifying compatibility. Different UCS models—such as the UCS-PSU-6536-AC or other variants—have different power requirements and connector specifications. Contact us today to ensure you select the correct power supply for your equipment.

Negative 48VDC power supplies like the UCS-PSU-6332-DC are commonly deployed in carrier-grade and telecom-adjacent data center environments where DC power distribution is preferred for efficiency and redundancy. These supplies support mission-critical switching infrastructure in high-availability deployments. We offer a range of Cisco power supplies to support various data center power architectures—contact us today for guidance on your specific requirements.

Yes, the XFP10GER-192IR-L supports Digital Optical Monitoring (DOM), which allows real-time monitoring of optical signal parameters such as transmit power, receive power, and module temperature. DOM capability enables proactive network management and troubleshooting, helping IT teams identify potential link degradation before it impacts service. We offer this module with full DOM support to help optimize your network operations.

The XFP10GLR-192SR-L requires single-mode fiber (SMF) cable for optimal performance at its maximum 10 km transmission distance. Single-mode fiber is specifically designed for long-distance, high-speed data transmission and provides superior performance compared to multimode fiber for 10 Gigabit applications. We have compatible SMF cabling solutions available from barcodesinc.com.

The Cisco CPS-HD2T7KL12G can serve as a storage upgrade or replacement drive for compatible Cisco security appliances that support 12G SAS LFF drives. Before upgrading, verify your appliance model supports this drive type and capacity. Contact us today—our team can help ensure you select the correct component for your security infrastructure.

The appliance includes dual out-of-band 10/100/1000 Mbps Ethernet management ports (mgmt0 and mgmt1 with 1/10G SFP+ support), RS-232 serial console access, and USB power-on auto-provision capabilities. Management protocols include CLI, SNMPv3, SSH v2, SFTP, and NX-API for RESTful HTTPS access, enabling flexible integration with enterprise network management systems. We offer comprehensive support for all management interfaces to ensure seamless deployment in your infrastructure.

The CTS-SX20N series represents entry to mid-level integration kits with price points ranging from approximately $4,600 to $13,400, while the CTS-SX80 series provides higher-end solutions ranging from $21,900 to $34,242, offering enhanced capabilities for larger deployments. The SX80 series includes advanced options like IP quality control (IPQC) and extended streaming capabilities. Contact us today to determine which series aligns with your video conferencing architecture and budget.

The Cisco 15454 series is compatible with a wide range of optical and RF accessories including fiber optic cables (LC-terminated), power cables, RF cables with various connector types (SMA, TNC, N-type), and Ethernet connectivity solutions. We offer compatible accessory modules such as the 15454-PP-4-SMR, 15454-TCC2P-K9, and 15454-XC-VXC-10G, among others. Visit barcodesinc.com or contact us today to identify the specific accessories needed for your configuration.

No, the QSFP-100G-SM-SR is optimized for short-range multimode fiber applications and is not suitable for long-distance connections. If you require long-distance 100G connectivity over single-mode fiber, we offer alternative Cisco transceivers like the QSFP-100G-LR4-S-RF, which supports up to 10 kilometers. Contact us today to discuss the right transceiver solution for your network distance requirements.

Yes, the Cisco DWDM-SFP10G-31.12 includes Digital Optical Monitoring (DOM) support, which enables real-time monitoring of optical signal strength, temperature, and transceiver health. This feature allows network administrators to proactively identify performance issues and optimize network operations. Available from us with full technical support for implementation and monitoring integration.

The CWDM4 (Coarse Wavelength Division Multiplexing) technology uses four wavelengths to achieve 100 Gigabit Ethernet over a single fiber pair, making it cost-effective for 2km distances. In contrast, SR4 modules use multimode fiber for shorter ranges, while LR4 and ZR4 modules support longer distances up to 10km and 80km respectively using single-mode fiber. We offer multiple Cisco 100G transceiver options to match your specific distance and infrastructure requirements.

100GBASE-SR10 transceivers like the CFP-100G-SR10 are ideal for high-bandwidth data center interconnects, storage area network (SAN) connections, and campus backbone links where distances are under 100 meters. They provide cost-effective 100 Gigabit connectivity without the expense of long-reach optics. We offer these transceivers to support modern warehouse, logistics, and IT infrastructure deployments that demand ultra-high-speed connectivity.

Yes, this Cisco DWDM transceiver includes Digital Optical Monitoring (DOM) support, allowing real-time monitoring of optical signal parameters including power levels, temperature, and bias current. DOM capability enables proactive network management and faster troubleshooting in production environments. We stock this module for customers requiring full visibility into their optical network health.

Yes, the Cisco DWDM-SFP10G-31.90 includes full DOM support, allowing you to monitor real-time optical parameters such as transmit and receive power, temperature, and voltage. This capability enables proactive network management and troubleshooting without requiring external test equipment. Visit barcodesinc.com to explore our complete inventory of monitored and unmonitored transceiver options.

Yes, this transceiver includes Digital Optical Monitoring (DOM) support, which allows real-time monitoring of optical signal strength, temperature, and transceiver health metrics. DOM capabilities help network administrators proactively identify performance issues and optimize network operations without manual testing.

The DWDM-SFP10G-33.47 is rated for commercial (COM) temperature range operation, which is suitable for standard data center and indoor networking environments. For industrial or extended temperature applications, alternative DWDM transceiver modules with industrial (IND) ratings are available. Contact us today to discuss temperature-specific requirements for your deployment.

The DWDM-SFP10G-55.75 includes Digital Optical Monitoring (DOM) support, enabling real-time monitoring of optical power levels, laser bias current, module temperature, and supply voltage. DOM functionality allows your network management system to track transceiver health and performance without manual intervention. This proactive monitoring helps prevent network downtime in mission-critical deployments.

Yes, the Cisco Catalyst 3850 switches support multiple hot-swappable network modules in various combinations, allowing you to customize your port configuration based on your connectivity needs. You can mix and match modules such as the C3850-NM-4-1G, C3850-NM-2-10G, and C3850-NM-4-10G to achieve the exact port mix required for your network. Visit barcodesinc.com to explore module combinations and find the right solution for your infrastructure.

The Catalyst 3650 Series switches feature integrated wireless controller capability, supporting up to 50 access points and 2000 wireless clients, enabling seamless convergence between wired and wireless networks. The stacking kit allows you to expand this wireless infrastructure across multiple switches while maintaining centralized management. We offer complete solutions for enterprise wireless deployments—contact us today to discuss your network architecture.

Yes, Cisco's DWDM-SFP10G series transceivers, including the 56.55 model, support Digital Optical Monitoring (DOM) functionality. DOM allows real-time monitoring of optical signal parameters such as transmit and receive power, temperature, and voltage, enabling proactive network management and troubleshooting. This feature is critical for maintaining reliable long-distance optical links in enterprise environments.

Yes, the SFP+ interfaces on Cisco C3850 network modules support both 10 Gigabit Ethernet and Gigabit Ethernet transceivers, allowing you to use existing Gigabit Ethernet SFP investments and upgrade to 10 Gigabit Ethernet when business demands change. This backward compatibility protects your infrastructure investment without requiring comprehensive switch upgrades. We offer compatible transceivers and modules—contact us today for availability.

The A9K-AC-PEM-V3 operates reliably in temperatures from 0° to 50°C with humidity levels from 5% to 95% relative humidity (noncondensing), and supports altitudes up to 10,000 feet. For storage, the module can withstand temperatures from -40° to 70°C. These specifications ensure the power module performs consistently in standard data center and edge deployment environments.

The C3KX-FAN-23CFM-RF is rated for 23 CFM (cubic feet per minute) maximum airflow, as indicated by its model designation. This airflow capacity is optimized for the thermal management requirements of Catalyst 3K-X series platforms in standard operating environments.

Based on similar Catalyst 3850 network modules in this product family, the C3KX-NM-10GT-RF provides multiple expansion slots for SFP+ optical modules, allowing you to customize port density based on your deployment needs. For exact slot specifications and configuration details, contact us today and our team can provide detailed technical documentation.

Yes, the C9200L-STACKKIT-RF enables you to stack multiple Catalyst 9200L switches into a single logical unit. This provides simplified management through a single IP address and control point, while increasing overall bandwidth and availability for your network infrastructure.

Active Optical Cables (AOCs) like the QSFP-4X10G-AOC2M offer superior signal integrity over longer distances, lower power consumption, and immunity to electromagnetic interference compared to traditional copper cables. They generate less heat and are ideal for high-density data center environments where space and thermal management are critical concerns. We offer a full range of Cisco AOC modules to meet your specific network requirements—visit barcodesinc.com to explore our options.

Stacking kits allow you to interconnect multiple Cisco C9200L switches into a single logical unit, simplifying management, reducing latency, and improving overall network performance. This is ideal for warehouse and logistics environments where you need scalable, unified network infrastructure. Visit barcodesinc.com to explore how stacking can optimize your network topology.

Active optical cables like the QSFP-4X10G-AOC1M offer superior signal integrity over longer distances, lower power consumption, and immunity to electromagnetic interference compared to passive copper cables. They are ideal for high-density deployments where heat dissipation and cable management are critical concerns in warehouse and logistics data centers. We offer both active optical and copper options to match your specific environmental requirements.

Active optical cables like the QSFP-4X10G-AOC10M offer superior performance over longer distances, lower power consumption, immunity to electromagnetic interference, and better signal integrity compared to passive copper cables. They are ideal for high-speed 40G and 100G deployments where signal degradation is a concern, and they generate less heat in dense network environments. We offer both active optical and copper transceiver options to match your specific distance and performance requirements.

The C9300-NM-2Y is ideal for enterprises requiring additional high-speed uplink capacity in their Catalyst 9300 deployments, including data center interconnects, campus core networking, and high-bandwidth application environments. The dual 25GE ports support redundancy and load balancing for mission-critical network infrastructure. Contact us today for guidance on deploying this module in your network architecture.

The Catalyst 9300 platform, including the C9300-NM-4M module, supports enterprise-grade security features such as MACsec-256 encryption, 100G IPsec hardware acceleration, Cisco Umbrella cloud security integration, and embedded wireless controller capabilities. These modules also support application hosting including ASAc firewall and Docker containers for enhanced network security posture. Our team at Barcodes Inc can help you configure these security features for your deployment.

Active optical cables like the QSFP-4X10G-AOC3M offer superior signal integrity over longer distances, lower power consumption, and immunity to electromagnetic interference compared to passive copper alternatives. They are ideal for high-speed 40G and 100G deployments where signal quality and reliability are critical. We offer a full range of Cisco active optical transceivers and cables to meet enterprise networking demands.

The Cisco A9K-40GE-TR is currently discontinued by the manufacturer. However, we may have inventory available, and our team can help you explore alternative current-generation line cards such as the A9K-4X100GE or A9K-8X100GE modules for upgraded performance. Contact us today to discuss your networking requirements and available options.

The module utilizes SFP+ (Small Form-factor Pluggable Plus) connectors for optical fiber connections, supporting 10 Gigabit Ethernet standards. SFP+ transceivers are hot-swappable, allowing you to select the appropriate transceiver type (single-mode, multi-mode, or direct-attach copper) based on your cabling infrastructure. We can help you source compatible transceivers and cabling through our complete networking solutions available from barcodesinc.com.

The A9K-40GE-SE meets rigorous international safety standards including UL 60950-1, CAN/CSA-C222.2, EN 60950-1, and IEC 60950-1, along with electromagnetic emissions certifications per CISPR 32 Class A, EN 55032 Class A, and IEEE 802.3. The module is also RoHS5 compliant, ensuring environmental responsibility in your network infrastructure. These certifications guarantee reliability and safety for mission-critical logistics and warehouse operations.

The QSFP-40G-SR4-RF is optimized for short-range connections over multi-mode fiber, while longer-range options like the Cisco QSFP-40G-LR4-S-RF use single-mode fiber and LC connectors for extended distances up to 10km. If your network requires extended transmission distances, single-mode transceiver modules are available from us, but the SR4 variant is ideal for high-speed, short-distance data center interconnects. Visit barcodesinc.com to explore our full range of Cisco transceiver options.

Active optical cables like the QSFP-4X10G-AOC5M use fiber optic technology with built-in signal processing to maintain signal integrity over longer distances and provide superior electromagnetic interference immunity. In contrast, passive copper cables are limited to shorter distances and are more susceptible to signal degradation. For 5-meter runs and demanding data center environments, the active optical design of this module offers better performance and reliability than passive alternatives.

The C9300-NM-8X specifically uses SFP+ optical fiber connections for its 10 Gigabit Ethernet ports. However, the Catalyst 9300 platform supports flexible downlink options including 10G Multigigabit copper, 5 Gbps, 2.5 Gbps, and 1 Gbps copper alternatives through different modules. Contact us today to explore all available connectivity options for your network design.

Yes, Cisco wireless modules are compatible with Cisco Catalyst 9800 Series Wireless Controllers as well as legacy controllers like the 3504, 5520, and 8540 models, plus Cisco Virtual Wireless Controller. The specific controller compatibility depends on the software version running on your network infrastructure. Contact us today to confirm compatibility with your existing setup.

Using line card fillers like the A9K-LC-FILR-V2 maintains proper chassis airflow and thermal management by blocking empty slots, which is critical for preventing overheating and ensuring stable router operation. Empty slots can create air bypass conditions that reduce cooling efficiency and may lead to premature component failure. This simple accessory is an essential part of proper router maintenance and longevity.

Yes, the CPAK-100G-SR10 includes digital optical monitoring (DOM) support, which enables real-time monitoring of optical signal strength, temperature, and transceiver health. This feature helps maintain network reliability and simplifies troubleshooting in production environments.

The CGM-WPAN-FSK-NA includes Unscheduled Automatic Power Save Delivery (UPSD) technology to reduce latency while optimizing power consumption in battery-powered and remote deployments. This feature is particularly valuable for grid and industrial IoT applications where power efficiency directly impacts operational costs and device lifespan.

The CFP-40G-SR4 delivers 40 Gigabit Ethernet performance over multi-mode fiber with an MPO connector. As a hot-swappable module, it can be installed and removed without powering down your equipment, providing flexibility for network upgrades and maintenance. Visit barcodesinc.com for complete technical specifications and datasheet information.

The Cisco CFP-40G-LR4= module features LC duplex connectors and operates over single-mode optical fiber at a 1310 nm wavelength. Single-mode fiber provides superior performance for long-distance connections compared to multi-mode alternatives. Visit barcodesinc.com to verify compatibility with your existing fiber infrastructure.

The A9K-LC-FILR is designed for straightforward installation into empty line card slots without requiring specialized tools or expertise. However, we recommend following Cisco's installation guidelines and considering your organization's change management procedures. Our team can provide installation support if needed—visit barcodesinc.com or contact us today.

The CPAK-100G-LR4 operates reliably in commercial temperature ranges from 0°C to +70°C (32°F to 158°F), with storage capabilities from -40°C to +70°C. This temperature specification ensures stable performance in standard data center and network closet environments.

Cisco optical transceivers like the CPAK-100G-SR4 typically operate in commercial temperature ranges of 41 to 104°F (5 to 40°C) with storage capabilities from -40 to 158°F (-40 to 70°C). These specifications ensure reliable performance in standard data center and network closet environments. Contact us today for detailed environmental specifications for your deployment scenario.

Yes, the Dell WD15 Docking Station supports multiple display outputs through its HDMI, VGA, and Mini DisplayPort connections, allowing you to expand your workspace with multiple monitors. This multi-display capability is ideal for warehouse management systems, logistics applications, and IT procurement workflows requiring extended screen real estate. We offer this docking station as a productivity enhancement for complex data visualization tasks.

Yes, the Dell 0X79H3's 300 GB capacity and hot-swappable design make it suitable for secondary storage, backup configurations, or expansion in Dell server environments. The SAS interface ensures reliable data transfer speeds, making it a dependable choice for backup and archival applications in logistics and inventory management systems.

Yes, the Dell 342-0847 features hot-pluggable capability, allowing you to remove and replace the drive while the server remains operational. This is especially valuable in warehouse and logistics environments where continuous uptime is critical for barcode scanning, inventory tracking, and order fulfillment systems.

Yes, you can mix different cable lengths (50 cm, 1 m, and 3 m) when building your C9200L stack, provided each switch pair is connected with a compatible data stack cable. This allows you to customize your stacking configuration to fit your specific rack and facility layout requirements.

The QSFP-4X10G-AOC10M is a breakout cable that splits one QSFP connection into four SFP+ connections, so it serves a different purpose than standard single-port transceivers and may not be a direct replacement for legacy modules. If you're upgrading from older SFP or SFP+ infrastructure, we recommend consulting with our team to design a migration path that matches your bandwidth and port density needs. Contact us today to discuss your network upgrade strategy.

The stack kit includes two data stack adapters that connect to the switches and one data stack cable (50 cm default) that links the adapters together. These components work together to create a high-speed connection between stacked switches, enabling them to function as a unified system.

The QSFP-4X10G-AOC1M is optimized for short-distance connections at 1 meter and is not designed for long-distance runs. For extended distances, Cisco offers longer AOC variants in 2M, 3M, 5M, and 10M configurations available from us. Contact us today to discuss cable length options that match your network topology.

Cisco network modules are engineered for reliable operation in standard data center and network closet environments with typical temperature and humidity controls. For specific environmental specifications, power requirements, and thermal considerations, contact us today—we can provide the complete technical datasheet and help you plan your deployment.

The QSFP-4X10G-AOC2M is specifically designed with a 2-meter cable length. If you require different distances, we offer related Cisco QSFP breakout modules in various lengths, including the QSFP-4X10G-AOC7M (7-meter) and other configurations. Contact us today to determine which cable length best fits your network topology and installation requirements.

The Catalyst 9300 series supports flexible power delivery options including Cisco 90W UPOE+, Cisco UPOE, and PoE+ through its downlink ports, enabling powered device connectivity across your network. The specific PoE capabilities depend on your overall switch configuration and power supply specifications. Contact us today to discuss PoE requirements and ensure proper power budgeting for your deployment.

The C9300-NM-2Y provides 8 x expansion slots for network module configurations within the Catalyst 9300 platform. This modular design allows organizations to scale their network capacity according to specific bandwidth and connectivity requirements. We offer flexible configurations and can help you plan your module deployment—contact us today.

Active optical cables are designed primarily for controlled data center and indoor network environments. For outdoor, harsh, or extreme temperature applications, you should consult the detailed environmental specifications and consider ruggedized alternatives. Contact us today to discuss environmental requirements and find the right transceiver solution for your deployment scenario.

The Catalyst 9300 series, including systems using the C9300-NM-8X module, supports advanced security capabilities such as MACsec-256 encryption, IPsec, Cisco Umbrella cloud security, and 100G IPsec in hardware. The platform also offers embedded wireless controller functionality and application hosting including ASAc firewall and Docker containers. We can help you configure security policies optimized for your organization.

The 40-port Gigabit Ethernet capacity of the A9K-40GE-SE enables consolidation of multiple network connections into a single line card, reducing infrastructure complexity and physical footprint in data centers and network closets. This density is particularly valuable for warehouse facilities deploying numerous barcode scanners, mobile computers, and RFID readers requiring simultaneous connectivity. We offer this module as part of scalable solutions that grow with your operations—contact us today for architecture recommendations.

The C9300-NM-8X-RF is designed to fit into the Catalyst 9300's network module expansion slots, with each module occupying one slot position. The exact number of available slots varies depending on your specific Catalyst 9300 model, allowing for flexible port expansion configurations. Contact us today to discuss your modular expansion strategy and determine the optimal module configuration for your deployment.

The Cisco QSFP-40G-SR4-RF features QSFP (Quad Small Form-factor Pluggable) connectors designed for multi-mode fiber connections in 40 Gigabit Ethernet applications. This compact form factor allows for higher port density in network switches and routers compared to larger transceiver modules. Available from us with full compatibility verification for your network equipment.

The QSFP-4X10G-AOC5M is designed for compatibility with Cisco network devices that feature QSFP ports, including switches, routers, and network interface cards. Before deployment, verify that your specific Cisco equipment supports QSFP breakout functionality and is compatible with 40G-to-4x10G configurations. We recommend contacting our team at barcodesinc.com to confirm compatibility with your exact hardware models.

The A9K-40GE-TR integrates into ASR 9900 platforms that support comprehensive redundancy including route processor redundancy, switch fabric redundancy, and power supply redundancy. The line card itself supports 100 Gigabit Ethernet PHY monitoring and flow control mechanisms to ensure network stability. Our technical team can provide detailed redundancy architecture documentation upon request.

The module operates in temperatures ranging from -4°F to 131°F (-20°C to 55°C) with operating humidity between 10 to 90 percent non-condensing. For storage, it can withstand temperatures from -40°F to 185°F (-40°C to 85°C), making it suitable for both indoor and outdoor industrial environments. Visit barcodesinc.com for detailed environmental specifications.

The CPAK-100G-SR10 is ideal for high-speed data center interconnects, campus backbone networks, and server-to-switch connections within 100-meter distances. Its short-reach design makes it cost-effective for densely populated network environments where extended transmission distances are unnecessary.

The A9K-LC-FILR is a genuine Cisco accessory that comes ready for installation in your ASR 9000 chassis. The product is manufactured to Cisco specifications and printed in the USA. For detailed packaging information and any included documentation, contact us today.

The CFP-40G-SR4 is specifically optimized for short-range multi-mode fiber deployments, unlike longer-range single-mode alternatives such as 40GBASE-LR4 modules. The CFP form factor and MPO connectivity make it particularly suited for high-density data center environments where space and performance efficiency are critical. We offer a full range of 40G and 100G transceiver modules to match your specific distance and fiber requirements.

Yes, the A9K-LC-FILR-V2 can be ordered as a standalone accessory or as part of your ASR 9000 series router configuration. We offer flexible purchasing options to match your network infrastructure needs. Contact us today to discuss bundling options or to add line card fillers to your existing order.

This Connected Grid Module is designed for industrial IoT, smart grid, and connected infrastructure applications where IEEE 802.15.4e/g mesh networking is required. Its support for multiple radio roles and quality-of-service features makes it suitable for mission-critical deployments in utilities, manufacturing, and remote monitoring scenarios. Visit barcodesinc.com to explore how we can support your specific deployment requirements.

The CFP-40G-LR4= is a CFP form factor module optimized for 40 Gigabit Ethernet over longer distances, while QSFP+ modules like the QSFP-40G-LR4-S-RF offer similar speeds in a more compact form factor. CFP modules typically provide better thermal management and power efficiency for high-density deployments, whereas QSFP+ modules are preferred when space constraints are a priority. We offer both form factors to match your specific network architecture requirements.

The CPAK-100G-LR4 operates at 1310 nm wavelength, which is the standard wavelength for long-range single-mode fiber transmission in 100 Gigabit Ethernet networks. This wavelength provides optimal performance and compatibility with enterprise optical infrastructure.

Yes, Cisco's 100G transceiver modules, including those in the SR4 family, support Digital Optical Monitoring (DOM) functionality. This feature allows real-time monitoring of optical signal parameters including power levels and temperature, enabling proactive network management. We can help you implement DOM-enabled solutions—contact us today for more information.

While the provided specifications reference related Dell products, the Dell WD15 is a compact docking solution designed for portable use with notebooks and tablets. For exact dimensional specifications and weight details of the 452-BDDV model, contact us today so our team can provide complete technical specifications for your installation planning.

The Dell 0X79H3 is a hot-swappable drive, meaning it can be safely removed and installed without shutting down your system—a critical feature for warehouse operations that cannot afford downtime. We recommend consulting your server's documentation or contacting us today to ensure proper installation and to verify that your system is configured to recognize the new drive.

The Dell 342-0847 provides 600 GB of storage capacity in a compact 2.5" form factor, offering substantial space for enterprise applications while maintaining the smaller physical footprint required in many server configurations. This capacity is well-suited for database-driven logistics and warehouse management systems.

Yes, the GENIUS-1602G-2D is designed to withstand harsh warehouse conditions with an IP42 environmental sealing rating and the ability to survive 30 drops from 1.4 meters (4 feet) to concrete. It operates reliably in temperatures from 0°C to 50°C (32°F to 122°F) and humidity levels up to 95% non-condensing, backed by a 3-year factory warranty.

The 1-year SmartNet service contract included with the CON-SW-C45X40XE provides proactive support, hardware replacement, and software updates that minimize unexpected downtime and maintenance costs. By ensuring your Catalyst 4500-X operates at peak efficiency with continuous support, you reduce the total cost of ownership for your network infrastructure. Contact us today to discuss how this service contract fits your budget and operational needs.

The Cisco HS-WL-730-BUNA-C supports both wireless Bluetooth and wired USB-A connections, allowing you to switch between your desk phone and computer seamlessly. The dual connectivity option makes it versatile for professionals who need to manage calls across multiple platforms throughout the workday. Visit barcodesinc.com to check compatibility with your specific devices.

Ear cushions naturally wear out over time with regular use, affecting comfort and audio seal quality. Replacing worn cushions with genuine Cisco spares like the CP-HS-WL-5EC8= restores comfort and ensures optimal headset performance for warehouse staff, logistics teams, and contact center operators who wear headsets throughout their shift.

The HS-WL-730-BUNA-P is a dual on-ear wireless headset with USB-A connectivity, positioning it between entry-level mono headsets and premium true wireless earbuds in Cisco's portfolio. Unlike the HS-WL-950 series earbuds or HS-WL-721 single on-ear models, this dual on-ear design provides enhanced comfort and stereo audio for professionals requiring extended wear time. We stock multiple Cisco headset options to match different use cases and budget requirements.

The Cisco HS-WL-730 features a color 3.2-inch QVGA (320 x 240 pixels) backlit LCD graphical display with 5-way navigational buttons for menu navigation and multimedia applications. The device includes 4 soft-key buttons that dynamically present calling options to users, along with convenient volume-control toggles for adjusting handset, monitor speaker, and ringer levels.

As a power device accessory, the Cisco PWR-RGD-AC-DC-RF should be installed in a controlled environment typical of telecommunications closets or data centers with proper ventilation and temperature management. The wide input voltage range (88-300VDC/85-264VAC) indicates it's engineered for stable operation across varying facility power conditions. Visit barcodesinc.com or contact us today for detailed environmental specifications and installation guidance specific to your deployment.

Yes, the PWR-INJDC-30 injects power over the unused wire pairs of standard Category 5 Ethernet cables, eliminating the need for specialized cabling. This design allows seamless integration into existing network infrastructure and supports cable runs up to 100 meters from the switch to the powered device. Visit barcodesinc.com to learn more about compatible cabling options we offer.

Cisco power supplies, including the PWR-IE65W-PC-DC, are covered by a five-year limited hardware warranty. This comprehensive coverage ensures your power infrastructure remains protected throughout extended deployments. We can provide full warranty details and support options—visit barcodesinc.com or contact us today for more information.

Yes, the PWR-IE65W-PC-AC supports PoE functionality on compatible Cisco IE3000/200 switches. However, the total power budget allocated to both the switch and all PoE-powered ports combined must not exceed the 65W maximum output rating. For applications requiring higher PoE capacity, we offer higher-wattage alternatives like the 170W and 240W models available from barcodesinc.com.

The RPS 2300 delivers high availability through modular power supplies with 60-microsecond failover capability, intelligent remote management of power supply redundancy, and configurable port priorities for flexible deployment. Its cost-effective design allows a single unit to back up multiple devices while connecting to six total devices, reducing capital expenditure while maintaining network uptime. The compact 1-rack-unit form factor and support for Power-over-Ethernet devices make it an ideal solution for converged data, voice, and video networks requiring uninterrupted operation.

Yes, Cisco provides spare variants of this power supply designated with an equals sign suffix (PWR-RGD-LOW-DC=) for direct replacement and maintenance scenarios. These spare units are identical in specifications and performance to original equipment, ensuring seamless integration into existing CGR20 deployments. We stock both original and spare configurations—visit barcodesinc.com or contact us today for availability and expedited shipping.

The Cisco PWR-ME3KX-DC measures 5.25 x 17.25 x 18.75 inches (133.35 x 438.15 x 476.25 mm) in height, width, and depth. This compact form factor is designed to integrate seamlessly into standard Cisco chassis configurations. For installation guidance and compatibility verification, contact our team at barcodesinc.com.

The UCSC-PSU1-1050W installs as a hot-swappable module in compatible Cisco UCS servers, allowing replacement without powering down the entire system in redundant PSU configurations. Proper installation requires ensuring correct seating and secure fastening to prevent power delivery issues. We recommend consulting the Cisco documentation or contacting us today for step-by-step installation guidance specific to your server model.

Yes, the UCSC-PSU2V2-1400W is designed for redundant PSU configurations in 2U UCS servers, allowing N+1 power supply failover for high-availability deployments. Multiple units can be installed simultaneously to ensure continuous operation if one power supply fails. Available from us for immediate deployment in enterprise data center environments.

Yes, the UCSC-PSU2V2-650W is designed to support redundant power supply configurations in Cisco 2U C-Series servers, allowing you to maintain uptime during power supply failures. Redundant PSU setups require compatible server chassis with multiple power supply slots and proper load-sharing capabilities. Contact us today to discuss your redundancy requirements and ensure you have the correct power supply configuration for your data center infrastructure.

As a data center-grade power supply, the UCSC-PSU-930WDC-RF is engineered for standard server room environments with controlled temperature and humidity. For detailed environmental specifications including operating temperature ranges and altitude ratings, we recommend contacting our technical team for the complete documentation.

The UCSC-PSU1-770W-RF accepts AC power input, making it suitable for standard data center power distribution infrastructure. The hot-plug design ensures redundant power configurations can be implemented for fault tolerance. We offer this model as part of our complete power supply and cord accessory selection.

Yes, the UCSC-PSU3-2400W supports DC operating input voltage ranging from 24Vdc to 60Vdc, with a maximum input current range of 33.2 to 12.4A and a DC input surge current rating below 50A. This dual AC/DC capability provides flexibility for deployments in diverse power environments. We offer this multi-input power supply to support various data center configurations.

The UCS-PSU-6332-AC is designed for enterprise data center environments where Cisco UCS 6332 fabric interconnects provide network connectivity and management for unified computing infrastructure. This power supply is ideal for organizations running virtualization, cloud computing, or high-performance computing workloads that require redundant, reliable power distribution. We recommend this accessory for IT teams managing mission-critical infrastructure requiring 24/7 uptime.

The XFP10GER-192IR-L is designed for long-distance applications (40 km on SMF), whereas the SFP-10G-SR is optimized for short-range connections (400 m on multimode fiber). The XFP10GER-192IR-L uses single-mode fiber and operates at 1550 nm wavelength for extended reach, making it ideal for campus backbone and metro networks, while the SR module is better suited for data center and short-haul applications. Contact us today to help determine which module best fits your network architecture.

Yes, the XFP10GLR-192SR-L includes Digital Optical Monitoring (DOM) support, which allows you to monitor real-time optical parameters such as transmit/receive power levels, temperature, and voltage. DOM capability enables proactive network management and helps identify potential issues before they impact network performance. This feature is valuable for maintaining reliable 10 Gigabit Ethernet infrastructure.

Cisco UCS platforms support specific power supply configurations based on chassis model and design specifications. Generally, mixing AC and DC supplies requires careful consideration of input voltage compatibility and load balancing. We recommend consulting the detailed specifications for your specific UCS model or contacting us today—our team can provide guidance on proper power supply configuration for your deployment.

While specific environmental specs for this model are available in Cisco's technical documentation, enterprise-grade hard drives like the CPS-HD2T7KL12G are designed for controlled data center environments with standard temperature and humidity ranges. For detailed environmental specifications, contact us today and our team will provide the complete technical datasheet.

The platform implements Per-VSAN Role-Based Access Control (RBAC) using LDAP, RADIUS, and TACACS+ authentication, along with SNMPv3 and SSH v2 encryption using AES standards. These security controls ensure that only authorized personnel can access and configure the appliance across your network. Available from us with full technical support for security policy implementation and compliance requirements.

Key specifications include multiparty capacity, supported video codecs, network connectivity options (IP-based), rack-mountable form factor for data center deployment, and integration compatibility with existing TelePresence endpoints. The Cisco Meeting Server 1000 M6 (CTI-CMS-1K-M6-K9) represents a current-generation platform designed for enterprise scalability. Our team can help you evaluate specifications and recommend the right system for your organization's conferencing needs.

The SR4 (short-range) uses multimode fiber for distances up to 100 meters, while the LR4 (long-range) uses single-mode fiber and supports distances up to 10 kilometers. SR4 modules are typically more cost-effective for data center environments, whereas LR4 modules are designed for campus and metro network interconnections. We stock both options—visit barcodesinc.com to compare specifications and find the right module for your network topology.

The Cisco 15454 series supports multiple optical transceiver options for various transmission distances, including single-mode fiber (SMF) modules rated for distances up to 80 km and beyond depending on the specific optic module selected. The ROADM architecture enables flexible wavelength routing across metropolitan and long-haul networks. Contact us today to discuss which transceiver options best match your transmission distance requirements.

The DWDM-SFP10G-31.12 is rated for commercial (COM) temperature range operation, which typically spans 0°C to 70°C. This commercial-grade specification makes it suitable for standard data center and network closet environments with proper climate control. For industrial-grade temperature range requirements, alternative DWDM transceiver models may be available—contact us today to discuss your specific environmental needs.

The Cisco DWDM-SFP10G-32.68= is rated for commercial (COM) temperature range operation, which is standard for data center and enterprise network deployments. For industrial-grade temperature specifications or extended operating ranges, alternative DWDM modules are available. Contact us today to discuss temperature requirements for your specific environment.

The DWDM-SFP10G-31.90 is rated for commercial (COM) temperature range operation, making it suitable for standard data center and enterprise network environments. For extended temperature range (EXT) or industrial (IND) applications requiring operation in harsh conditions, we offer alternative transceiver modules designed for those specifications. Contact us today to discuss your environmental requirements.

The DWDM-SFP10G-30.33 is rated for commercial (COM) temperature range operation. If you require industrial-grade temperature specifications for extended environmental conditions, we offer alternative DWDM transceiver models. Visit barcodesinc.com or contact us today to discuss your specific environmental requirements.

The Cisco QSFP-100G-CWDM4-S= delivers 100 Gigabit Ethernet (100 Gbit/s) performance, making it suitable for high-bandwidth applications in modern data centers and enterprise networks. This transceiver is designed for 100GBase-CWDM4 standards compliance. Contact us today to verify compatibility with your specific network infrastructure.

The DWDM-SFP10G series includes multiple wavelength options (such as 36.61 nm, 37.40 nm, 38.19 nm, and others) that allow organizations to build dense wavelength-division multiplexed networks with multiple channels over a single fiber pair. Each wavelength module operates at 10 Gigabit speeds over 80 km SMF distances with DOM support. We offer the complete range of DWDM wavelength modules to support your network expansion and redundancy requirements.

CFP (C Form-factor Pluggable) modules like the CFP-100G-SR10 are larger than QSFP28 modules and typically offer higher power efficiency and better thermal management for 100 Gigabit applications. The CFP form factor is commonly used in carrier-grade and data center equipment, while QSFP28 provides a more compact option. Available from us are both CFP and QSFP form factor options—contact us today to determine which is best for your equipment.

DWDM transceivers like the DWDM-SFP10G-56.55 are ideal for long-distance, high-capacity network links in data centers, metro networks, and carrier-class deployments where multiple wavelengths must be transmitted over a single fiber strand. They enable cost-effective capacity expansion by allowing multiple 10 Gigabit channels on one fiber pair. Available from us for warehouse, logistics, and IT infrastructure upgrades.

The A9K-AC-PEM-V3 complies with international safety standards including UL/CSA/IEC/EN 60950-1 and AS/NZS 60950, and meets EMC requirements per FCC Part 15, ICES-003, EN55022, and CISPR22. The module also adheres to ROHS (Reduction of Hazardous Substances) standards for environmental compliance. Visit barcodesinc.com or contact us today to request full certification documentation.

The Cisco Catalyst 3650 Series switches equipped with this stacking kit provide advanced Power over Ethernet Plus (PoE+) on all ports, delivering up to 30W per port to power connected devices. This robust power delivery is ideal for powering access points, IP phones, and other networked devices across your stacked switch infrastructure. We offer complete PoE+ solutions for enterprise deployments—visit barcodesinc.com to explore compatible power supplies and accessories.

The Cisco Catalyst 3850 Series switches operate reliably in temperatures ranging from -5°C to +45°C, making them suitable for standard data center and network closet environments. The switches feature redundant fans and power supplies for high availability, along with multiple power supply options including 350W AC, 715W AC, 1100W AC, and 440W DC configurations. Our team can help you select the appropriate power and environmental specifications for your deployment.

Cisco Catalyst 3850 Series switches operate in environments ranging from -5°C to +45°C, making them suitable for standard data center and warehouse deployments. The switches also feature redundant fans and power supplies (available in 350W AC, 715W AC, 1100W AC, and 440W DC options) to ensure reliable operation in demanding logistics and warehouse environments. Visit barcodesinc.com for complete environmental specifications and power supply options.

Yes, the DWDM-SFP10G-55.75 is specifically engineered for dense wavelength division multiplexing systems, where multiple wavelengths operate simultaneously on a single fiber strand. The 1555.75 nm wavelength is part of the standard DWDM grid, allowing it to be combined with other DWDM wavelengths in the C-band for increased network capacity. Contact us today to discuss DWDM system design and additional wavelength options available from us.

Yes, we offer the Cisco C3KX-FAN-23CFM-RF and a complete selection of Cisco networking accessories and spare parts. Visit barcodesinc.com or contact us today to check current availability, pricing, and lead times for this remanufactured component.

The GENIUS-1602G-2D comes with a USB cable, wrist strap, and neck strap for convenient carrying and use. Optional accessories and chargers are available to expand functionality and meet specific operational needs. Contact us today at 312-765-8855 or [email protected] to discuss accessory options for your deployment.

Yes, the Catalyst 4500-X chassis features a modular design with multiple card slots that support online insertion and removal (OIR) of service modules and line cards. This allows you to expand port density and add functionality without replacing the entire switch, making it a scalable solution for growing enterprises. We offer a full range of compatible modules and accessories—visit barcodesinc.com or contact our team to discuss your expansion requirements.

We offer the Cisco CP-HS-WL-5EC8= ear cushion spare parts as part of our comprehensive Cisco telecommunications accessories inventory. Visit barcodesinc.com to check availability and pricing, or contact us today for bulk orders and volume discounts for your organization.

The Cisco HS-WL-730-BUNA-P supports comprehensive language localization including English, Spanish, French, German, Chinese, Japanese, and many others across 30+ language variants, making it suitable for global logistics and warehouse operations teams. This multilingual support extends to voice prompts and interface elements, ensuring accessibility for diverse international teams. Contact us today to discuss language configuration options for your organization's deployment.

The Cisco HS-WL-730-BUNA-C features an on-ear, binaural design with ear-cup construction for comfortable all-day wear in office and warehouse environments. The dual on-ear configuration provides balanced audio distribution and secure fit during active work. Contact us today to discuss whether this headset meets your team's comfort and durability requirements.

The Cisco HS-WL-730 supports a range of business applications including customizable photo album screensaver, MP3 music player, RSS web services, Cisco MonitorView, and SIP third-party call control. It also provides LDAP and Cisco XML-based corporate directory support with Cisco XML services interface (XSI) for seamless enterprise integration. Contact us today to learn how we can help integrate this headset into your telecommunications infrastructure.

No, the 65W PWR-IE65W-PC-DC should not be substituted for higher-wattage modules like the 170W or 240W alternatives, as undersizing power supplies can cause performance degradation or system failure. If your switch requires more power, consider the PWR-IE170W-PC-DC (170W) or other higher-capacity modules available from us. Contact us today to determine the correct power supply size for your specific switch configuration and PoE requirements.

The Cisco PWR-INJDC-30 is a DC power injector designed for environments requiring direct current power delivery. While specific voltage and current specifications vary by model variant, Cisco PoE injectors in this class typically operate with input voltages ranging from 100-240 VAC and deliver output in the 48-56 VDC range. For detailed electrical specifications and environmental operating conditions, contact us today or visit barcodesinc.com to access complete technical documentation.

Cisco provides a five-year limited hardware warranty on all IE power supply products. We stock both new and refurbished units of the PWR-IE65W-PC-AC to meet different budget requirements, and our team can assist with warranty registration, technical specifications, and integration support. Contact us today at barcodesinc.com for current availability, pricing, and warranty details on this industrial power module.

We offer the Cisco PWR-RGD-AC-DC-RF and a full range of Cisco power device accessories and telecommunications products through our AIDC distribution network. Our team specializes in helping warehouse managers and IT procurement professionals source genuine Cisco components with competitive pricing and reliable delivery. Visit barcodesinc.com or contact us today to check availability and receive a quote for your power supply needs.

The PWR-ME3KX-DC provides a minimum 20 millisecond output holdup time at 100 VAC, ensuring continuous power delivery during brief AC power interruptions and preventing network device resets. For DC input configurations, the holdup time is 2 milliseconds minimum at -40 VDC, maintaining system stability across various power scenarios. We offer this spare part to maintain your network's power resilience—visit barcodesinc.com for ordering.

The PWR-RGD-LOW-DC is designed for Cisco CGR20 edge routers and platforms requiring low-voltage DC power in branch offices, remote sites, and industrial environments with existing 24-60VDC power infrastructure. It's particularly valuable in deployments where DC power distribution is already established, eliminating the need for AC-to-DC conversion. Our team can help you determine if this power supply fits your network architecture—contact us today for a consultation.

The Cisco PWR-RPS2300++ is currently listed as discontinued by the manufacturer. However, we may have refurbished or legacy units available in our inventory. Contact us today at barcodesinc.com to inquire about current availability, alternative redundant power solutions, or compatible accessories that can meet your network redundancy requirements.

If your UCSC-PSU2V2-1400W or compatible Cisco power supply fails, we offer replacement units and related accessories to minimize downtime in your infrastructure. Our team can help identify the correct replacement PSU for your specific UCS server model and ensure proper installation. Contact us today for rapid replacement options and technical guidance.

We offer the Cisco UCSC-PSU1-1050W through our extensive inventory of Cisco UCS accessories and components. Our team provides technical support to help you select the correct power supply for your configuration, verify compatibility, and ensure proper deployment. Visit barcodesinc.com or contact us today to check availability, pricing, and discuss your power supply requirements with our specialists.

We offer the Cisco UCSC-PSU-930WDC-RF and a comprehensive selection of Cisco power supplies and accessories at barcodesinc.com. Our team can provide pricing, availability, and warranty information for this component. Contact us today to place an order or discuss your power supply needs.

If your power supply fails, you'll need to replace it with a compatible unit like the UCSC-PSU2V2-650W to restore server operation. We maintain inventory of Cisco power supplies and accessories to minimize your downtime and keep your infrastructure running. Visit barcodesinc.com or contact us today to order a replacement power supply quickly, and our team can help ensure you get the exact model your server requires.

The UCSC-PSU1-770W-RF can serve as a replacement for compatible Cisco C-Series 1U servers, provided your system supports 770W capacity and AC power input. Replacement procedures are straightforward due to the hot-pluggable design, allowing you to swap units without system shutdown. Contact us today to verify compatibility with your specific server model and ensure proper installation.

The Cisco UCS-PSU-6332-AC is currently listed as discontinued by the manufacturer, but we may have inventory available depending on current stock levels. If you need this power supply or are looking for compatible alternatives, visit barcodesinc.com or contact us today to check availability and explore replacement options such as the UCS-PSU-6536-AC or other current-generation Cisco power supplies.

The UCSC-PSU3-2400W is currently listed as discontinued in our inventory. However, we maintain a comprehensive selection of alternative Cisco power supplies including the UCSC-PSU1-1050W, UCSC-PSU2V2-1400W, and other UCS power devices to meet your requirements. Contact us today to explore compatible replacement options or discuss your power supply needs.

If you require a replacement for the discontinued UCS-PSU-6332-DC, we have alternative Cisco power supply options available, including models like the UCS-PSU-6536-AC and other compatible units for your UCS generation. Our team can help identify the correct replacement based on your chassis model and power requirements. Contact us today at barcodesinc.com to find the right power supply solution for your infrastructure.

The XFP10GER-192IR-L is a specialized long-distance module that operates independently on its own SMF fiber link; it cannot be mixed on the same fiber strand with other transceiver types due to wavelength and fiber-type requirements. However, you can deploy multiple different XFP and SFP modules across different ports in the same network switch to support various distance and connectivity requirements. Our team at Barcodes Inc can help you design a heterogeneous 10G network strategy that incorporates multiple transceiver types for optimal coverage.

The XFP10GLR-192SR-L is rated for commercial operating temperature ranges, making it suitable for standard data center and network closet environments. For industrial or extended temperature applications, Cisco offers industrial-grade variants with wider temperature specifications. Visit barcodesinc.com or contact us today for detailed environmental specifications and to discuss your deployment requirements.

The 2TB capacity of the CPS-HD2T7KL12G provides substantial storage for security logs, threat intelligence, and system data on Cisco security platforms. The 12G SAS interface delivers enterprise-grade performance and reliability compared to older SATA-based solutions. We offer this drive as part of our full range of Cisco security components—visit barcodesinc.com to explore compatible options for your deployment.

Yes, the platform supports advanced networking features including fabric-based multipathing, VRRP for management IP interface redundancy, and per-VSAN fabric services for high-availability configurations. These capabilities enable organizations to build resilient security architectures that minimize downtime and ensure continuous threat protection. Contact us today to design a redundant security deployment that meets your business continuity requirements.

The right solution depends on your multiparty conferencing capacity needs, budget, existing Cisco infrastructure, and deployment preferences (cloud vs. on-premises). We offer discontinued legacy systems like the CTI-410V-VTS-K9 as well as current-generation platforms, plus compatible accessories from the CTS-SX series. Contact us today—our team will assess your requirements and recommend the optimal video conferencing system and integration kits for your enterprise.

Yes, the Cisco QSFP-100G-SM-SR transceiver includes Digital Optical Monitoring (DOM) support, which allows real-time monitoring of optical signal strength, temperature, and power levels. This feature enables proactive network management and helps identify potential connectivity issues before they impact service. Available from us as part of our complete Cisco transceiver module selection for enterprise networking.

The Cisco 15454 platform supports advanced functions including VSAN (Virtual SAN), NPV (N-Port Virtualization), in-order delivery, port channel with multipath load balancing, and flow-based QoS capabilities. These features enable sophisticated traffic management and network virtualization in optical transport environments. We offer complete Cisco optical networking solutions with technical support—visit barcodesinc.com to learn more about deploying these advanced capabilities.

Unlike standard 10GBASE-LR (10 km) and 10GBASE-ER (40 km) transceivers, the DWDM-SFP10G-31.12 uses Dense Wavelength Division Multiplexing technology to enable multiple wavelengths on a single fiber strand, maximizing fiber utilization and reducing infrastructure costs. DWDM transceivers support extended distances comparable to or exceeding ER modules while allowing multiple channels per fiber. We offer the complete range of Cisco transceiver options—visit barcodesinc.com to compare specifications for your network design.

Cisco DWDM transceiver part numbers follow the format DWDM-SFP10G-[wavelength]=, where the wavelength specification (like 33.47) indicates the precise optical frequency. All 10G DWDM modules in this series support the same 80 km SMF reach and DOM capabilities, with differences only in wavelength for wavelength-division multiplexing applications. Visit barcodesinc.com or contact us today to verify the correct wavelength module for your network architecture.

DWDM (Dense Wavelength Division Multiplexing) transceivers like the DWDM-SFP10G-30.33 support more wavelength channels in a narrower spectrum range, making them ideal for high-capacity, long-distance carrier and service provider networks. CWDM transceivers offer wider channel spacing with fewer wavelengths but lower cost, better suited for shorter metro networks. We offer both DWDM and CWDM options—contact us today to determine which technology best fits your network architecture.

The DWDM-SFP10G-31.90 is engineered for long-distance 10 Gbps transmission over single-mode fiber using DWDM technology, making it ideal for carrier networks, metro area networks, and long-haul connections. DWDM's wavelength-specific design allows multiple channels to coexist on the same fiber, maximizing bandwidth utilization. We offer a complete range of DWDM wavelengths and distances—visit barcodesinc.com or contact us today for your specific distance and capacity needs.

Yes, the Cisco QSFP-100G-CWDM4-S= can be deployed in warehouse and logistics facilities for high-speed network connectivity between distribution centers or within large facility networks over distances up to 2km. Its hot-swappable design and reliable performance make it suitable for mission-critical RFID, barcode scanning, and inventory management systems that require low-latency data transmission. We offer this transceiver along with complete networking solutions for logistics operations—contact us today for a comprehensive network assessment.

The Cisco CFP-100G-SR10 transceiver supports digital optical monitoring capabilities, which allow real-time monitoring of optical signal strength, temperature, and transceiver health metrics. DOM support enables proactive network management and troubleshooting in your infrastructure. We provide full technical documentation and support for DOM-enabled transceivers—visit barcodesinc.com to learn more about monitoring your network equipment.

DWDM (Dense Wavelength Division Multiplexing) allows multiple data streams at different wavelengths to travel simultaneously over a single fiber pair, dramatically increasing bandwidth capacity without requiring additional fiber installation. This technology is essential for carriers and large enterprises managing high-traffic backbone networks and long-distance links. We offer a complete range of DWDM transceivers to maximize your existing fiber investment—visit barcodesinc.com to explore our full selection.

DWDM (Dense Wavelength Division Multiplexing) transceivers like the DWDM-SFP10G-55.75 support more wavelengths with tighter spacing, enabling higher capacity over longer distances on single-mode fiber, while CWDM (Coarse Wavelength Division Multiplexing) modules support fewer wavelengths with wider spacing, typically for shorter distances. DWDM is ideal for carrier-class networks and long-haul applications, whereas CWDM suits enterprise campus networks. We offer both DWDM and CWDM solutions—visit barcodesinc.com to find the right fit for your infrastructure.

The Cisco Catalyst 3850 Series switches support comprehensive management through SNMP v1, v2c, v3, command-line interface (CLI), and web-based management tools, providing flexibility for integration into your existing network management infrastructure. The switch also features Cisco's Unified Access Data Plane (UADP) ASIC technology for uniform wired-wireless policy enforcement and application visibility. Contact us today to learn how we can support your network management and monitoring requirements.

Replacement fan modules like the C3KX-FAN-23CFM-RF are critical for maintaining proper thermal management in network switches, preventing overheating that can cause performance degradation or equipment failure. Regular fan maintenance and timely replacement of worn cooling components help ensure continuous network uptime and extend the operational life of your infrastructure investments.

The DWDM-SFP10G-56.55 is a 10 Gigabit DWDM transceiver optimized for long-distance, wavelength-specific deployments, unlike shorter-reach alternatives such as 10GBASE-SR (400m on multimode fiber) or 10GBASE-LR (10km on single-mode fiber). DWDM modules support multiple wavelengths on shared fiber infrastructure, making them ideal for high-density, long-haul network architectures. Contact us today to determine which transceiver type best fits your network requirements.

The Cisco Catalyst 3850 Series supports comprehensive management through SNMP v1, v2c, v3, command-line interface (CLI), and web-based management, enabling IT teams to monitor and control network operations from multiple platforms. The platform also features the new Unified Access Data Plane (UADP) ASIC for uniform wired-wireless policy enforcement and application visibility. Contact us today to learn how we can support your network management and monitoring requirements.

We offer the Cisco A9K-AC-PEM-V3 as part of our complete Cisco networking product catalog, with expert technical support to help you select the right power module for your ASR9K deployment. Our team can assist with compatibility verification, configuration guidance, and integration planning. Contact us today or visit barcodesinc.com to place your order and discuss your specific infrastructure requirements.

The C3650-STACK-KIT-RF is listed as discontinued by Cisco, though we may have remaining inventory available from our stock. If you require stacking solutions for Catalyst 3650 switches, we recommend contacting us today to check availability or to discuss alternative current-generation Cisco stacking solutions that meet your networking requirements.

The C9200L-STACKKIT-RF is available from us at Barcodes Inc. Contact us today or visit barcodesinc.com to check current availability and pricing for this Cisco Catalyst 9200L stacking accessory and explore our complete inventory of network switches and accessories.

The Catalyst 3K-X platform supports multiple network module types within available slots, allowing you to combine different port densities and speeds based on your network architecture. However, configuration compatibility depends on your specific switch model and firmware version. Contact us today and our team can help you design an optimal modular configuration for your network requirements.

The C9200-STACK-KIT is designed for the original C9200 switch models, while the C9200L-STACK-KIT is specifically engineered for C9200L switches. Both kits contain two data stack adapters and one data stack cable, but they are not interchangeable. Contact us today to verify which kit matches your switch hardware.

Cisco transceiver modules and active optical cables are specialized components with varying availability status. We maintain an inventory of current and discontinued Cisco networking products, and our team can help identify compatible alternatives if your specific model is no longer in stock. Visit barcodesinc.com or contact us today to check current availability and lead times for your order.

The QSFP-4X10G-AOC2M is a Cisco networking component available through our inventory at barcodesinc.com. As a leading AIDC and networking products distributor, we maintain stock of key Cisco transceiver modules and can assist with procurement, technical specifications, and deployment support. Contact us today for current availability, pricing, and lead times on this or alternative Cisco optical cable solutions.

Active optical cables like the QSFP-4X10G-AOC10M are engineered to operate reliably in standard data center environments with controlled temperature and humidity, and they offer excellent EMI resistance compared to copper alternatives. For specific operating temperature ranges, humidity specifications, and environmental durability details, we recommend reviewing the technical documentation or contacting our team. Visit barcodesinc.com to request detailed specifications for your deployment planning.

The C9300-NM-2Y provides 2 x 25GE ports, making it suitable for organizations needing moderate uplink expansion, while other modules in the Catalyst 9300 family may offer different port counts and speeds. The 25GBase-X optical connectivity ensures long-distance capability and future-ready performance. Visit barcodesinc.com or contact our team to compare all available Catalyst 9300 network modules and select the right solution for your infrastructure.

The Catalyst 9300 platform offers dual management approaches: traditional Cisco IOS-XE command-line management and optional Meraki cloud-based monitoring and management for simplified operations and visibility. The platform also supports Cisco Spaces, ThousandEyes Enterprise Agent integration, and wire sensor capabilities for comprehensive network analytics. We offer both management options through our solutions—visit barcodesinc.com to explore which approach best fits your operational model.

The QSFP-4X10G-AOC3M provides a 1-to-4 breakout configuration that converts one 40G QSFP connection into four independent 10G SFP+ ports, offering flexibility for mixed-speed network designs. We also offer higher-density options like 100G QSFP modules and direct-attach cables in various lengths to suit different bandwidth and distance requirements. Visit barcodesinc.com to explore our complete selection of Cisco optical transceivers and active optical cables.

The C9300-NM-8X is a legacy module, though we maintain inventory of Cisco networking components and can assist with availability. For current deployments, we recommend exploring newer Catalyst 9300 network modules with enhanced capabilities such as the 25G and 40G options. Contact us today to discuss the best module options for your infrastructure needs and to check current stock status.

The Cisco QSFP-40G-SR4-RF is designed to work with Cisco networking equipment and other devices that support standard QSFP modules and 40GBASE-SR4 specifications. Compatibility depends on your specific switch, router, or network interface card supporting this transceiver standard. Contact us today to confirm compatibility with your particular networking hardware before purchasing.

The Cisco QSFP-4X10G-AOC5M is built with industrial-grade fiber optic construction designed for reliable performance in controlled data center environments. Active optical cables are generally more durable than passive copper alternatives due to their fiber optic core, which resists electromagnetic interference and provides consistent signal quality. For detailed environmental specifications and operating conditions, visit barcodesinc.com or contact us today to speak with our technical team.

This 8-port 10GE module is ideal for expanding port density in enterprise data centers, campus networks, and service provider environments requiring high-speed connectivity. Common deployments include core network aggregation, server farm interconnects, and WAN edge acceleration. Our networking specialists can assess your bandwidth requirements and recommend the right module configuration—visit barcodesinc.com or contact us today for a consultation.

The A9K-40GE-SE incorporates Class 1 laser products for fiber optic connectivity and complies with IEEE 802.3 standards, ensuring compatibility with standard Gigabit Ethernet infrastructure. The module supports both copper and fiber connectivity options depending on your network configuration and distance requirements. Available from us at barcodesinc.com, this module integrates with existing enterprise networks supporting barcode scanning systems and mobile computing devices across your logistics operations.

We offer the Cisco A9K-40GE-TR and related packet transport line cards through our comprehensive AIDC and networking product catalog. For current pricing, availability, and to explore alternative high-capacity line cards that may better suit your network roadmap, contact us today or visit barcodesinc.com to speak with our Cisco networking specialists.

The module supports enterprise-grade security including 802.11i, WPA2, and WPA encryption standards, 802.1X authentication, and AES/TKIP encryption protocols. These security features ensure your wireless network data is protected against unauthorized access. We offer complete Cisco wireless solutions with security built-in—contact us today to discuss your network security requirements.

We offer Cisco transceiver modules and optical networking components as part of our comprehensive AIDC and data networking product portfolio. Contact us today to check current availability, pricing, and to discuss your specific network requirements—our team can help you find the right solution for your infrastructure.

While the CPAK-100G-SR10 provides 100-meter reach over multimode fiber, longer-range alternatives like 100G-LR modules support 10 kilometers over single-mode fiber for metro and WAN applications. The SR10 variant is optimized for cost efficiency and power consumption in short-distance deployments where extended reach is not needed. Contact us today at barcodesinc.com to discuss which transceiver module best fits your network architecture.

The Cisco CFP-40G-LR4= is compatible with Cisco equipment that supports CFP module slots and 40GBase-LR4 specifications. Compatibility depends on your specific switch or router model and its port configuration. Contact us today with your equipment details, and our team can verify compatibility and help you select the right transceiver modules for your infrastructure.

The A9K-LC-FILR-V2 represents the current generation of Cisco line card slot fillers with design improvements for compatibility and durability with modern ASR 9000 deployments. The version 2 designation indicates this is the latest specification from Cisco for optimal performance. We stock the current V2 version to ensure you receive the most up-to-date and compatible components for your network.

Leaving line card slots empty can compromise chassis cooling efficiency and allow dust and debris to enter the system, potentially causing equipment failures. The A9K-LC-FILR maintains proper airflow patterns and protects internal components, ensuring optimal performance and reliability of your network infrastructure. We recommend using fillers for all unused slots in production environments.

We offer the Cisco CFP-40G-SR4 and a comprehensive selection of optical transceiver modules from our inventory. Our team provides expert guidance on module selection, compatibility verification, and network deployment. Contact us today or visit barcodesinc.com to check availability, pricing, and to speak with a networking specialist about your requirements.

Cisco requires customers to verify approval for use in their individual countries through their regulatory compliance portal at https://www.cisco.com/go/aironet/compliance. This ensures your deployment meets local frequency and safety regulations. Our team at Barcodes Inc can assist with procurement and provide documentation support for your regulatory verification process.

The CPAK-100G-SR4 uses multimode fiber (MMF) with LC/UPC connectors, which is the standard for short-reach 100 Gigabit Ethernet applications. Multimode fiber is cost-effective for shorter distances and is commonly deployed in data centers and enterprise networks. We offer complete transceiver solutions with compatible cabling—visit barcodesinc.com or contact us today for your fiber infrastructure needs.

The Dell WD15 Docking Station is well-suited for enterprise environments including warehouse management, logistics operations, and IT procurement scenarios where reliable multi-device connectivity is essential. Its robust port selection, 130W power delivery, and support for multiple display outputs make it ideal for complex data-intensive applications. We offer this docking station as part of our comprehensive AIDC and mobile computing solutions for enterprise customers.

We offer the Dell 0X79H3 drive as part of our comprehensive AIDC product lineup. Visit barcodesinc.com to check availability, pricing, and to place an order, or contact us today for volume discounts, technical specifications, or integration support for your warehouse and logistics infrastructure.

We offer the Dell 342-0847 drive as part of our extensive inventory of genuine Dell components and storage solutions for enterprise environments. Contact us today or visit barcodesinc.com to check current availability, pricing, and delivery options for your warehouse or IT infrastructure needs.