Motorola KT-147407-01 Accessory

The Cisco CAB-2HDMI-2M= features a 2-meter HDMI-to-HDMI cable with auto-expand capability, providing a reliable connection for moderate distances between HDMI-compatible devices. This length is ideal for conference rooms, control centers, and multimedia setups where devices are positioned a few feet apart.

The Cisco CAB-E1-BNC cable is a 5-meter BNC connector cable with 75-ohm impedance and unbalanced configuration, designed specifically for FSIP and MIP-CE1 interfaces. This cable meets standard E1 network interface requirements for reliable data transmission in telecommunications environments.

The Cisco CAB-RTN-1013-AC is an AC Cord Retention Assembly specifically designed for the Cisco ASR1013 router. This cable assembly ensures secure and reliable power connections for enterprise-grade routing equipment in data center and network infrastructure deployments. We offer this genuine Cisco component to maintain optimal performance and safety standards for your ASR1013 installation.

The Cisco CAB-2HDMI-2M= is compatible with any device featuring standard HDMI ports, including Cisco routers, video conferencing systems, displays, projectors, and multimedia equipment. The HDMI standard ensures broad compatibility across consumer and enterprise-grade devices.

Yes, the Cisco CAB-E1-BNC cable is compatible with Cisco 1000 Series routers and their E1 network interface modules. The cable's BNC connectors and 75-ohm impedance specifications ensure proper connectivity with FSIP and MIP-CE1 interface cards used in these routing platforms.

The CAB-RTN-1013-AC is specifically designed for the Cisco ASR1013 router and is not compatible with other ASR series models such as the ASR1001, ASR1002, ASR1004, or ASR1006. Each router model in the ASR 1000 Series requires its own corresponding cable assembly to ensure proper fit and electrical safety. Contact us today if you need to identify the correct cable assembly for your specific router model.

Yes, the HDMI standard supported by the CAB-2HDMI-2M= is designed to transmit high-definition video and audio signals reliably. The 2-meter length maintains signal integrity for HD and 4K video applications when used with compatible source and display devices.

The Cisco CAB-E1-BNC cable is used for establishing E1 digital circuit connections in telecommunications networks, particularly in WAN configurations and carrier-grade networking environments. It's ideal for connecting routers to E1 service provider circuits that require 1.984 Mbps framed mode data transmission.

The Cisco ASR1013 router supports worldwide-ranging AC power input from 180 to 264V at 240V nominal (50 or 60 Hz), with a maximum AC power consumption of 4000W on high-line input. It also supports DC power input from -40.5 to -72V at -48V nominal, with maximum DC consumption of 4200W. The CAB-RTN-1013-AC retention assembly is engineered to safely manage these power specifications in your network infrastructure.

The Cisco CAB-E1-BNC cable supports both DTE and DCE interface modes with G.704/structured encoding standards. This flexibility allows it to work in various network topologies where routers may function as either data terminal equipment or data circuit-terminating equipment.

The auto-expand feature on the Cisco CAB-2HDMI-2M= refers to the cable's flexible design that allows it to extend and retract as needed, making it easier to manage cable routing and storage in dynamic environments. This design reduces clutter while maintaining the full 2-meter reach when extended.

The Cisco ASR1013 router is designed to operate in standard data center environments with front-to-back airflow cooling. While specific operating temperature ranges are referenced in Cisco's technical documentation, we recommend consulting the complete ASR 1000 Series specifications for detailed environmental requirements. Visit barcodesinc.com or contact us today to request the full technical datasheet for your deployment planning.

The 2-meter length of the CAB-2HDMI-2M= provides greater flexibility for device placement compared to shorter cables, making it suitable for larger conference rooms and installations. If you need different lengths, we offer various Cisco cable options to match your specific distance requirements.

The Cisco CAB-RTN-1013-AC is available from us as a genuine Cisco component for ASR1013 router installations. We maintain stock of Cisco cables, connectors, and adapters for enterprise networking equipment. Contact us today or visit barcodesinc.com to place your order and ensure you receive authentic Cisco parts with proper warranty coverage.

E1 interfaces using the Cisco CAB-E1-BNC cable support comprehensive diagnostics including ANSI T1.403 loopback testing, BERT pattern generation, alarm detection (AIS, FEBE, OOF), and CRC error monitoring. These diagnostic features enable network technicians to troubleshoot and verify circuit integrity.

We offer the Cisco CAB-2HDMI-2M= and a complete range of Cisco networking cables and adapters for enterprise and commercial applications. Contact us today or visit barcodesinc.com to check availability and discuss your connectivity needs with our AIDC specialists.

We offer the Cisco CAB-E1-BNC cable as part of our comprehensive selection of Cisco networking cables and adapters. Contact us today at barcodesinc.com or reach out to our team for availability, pricing, and technical guidance on E1 interface configurations for your network infrastructure.

The Cisco CAB-RTN-1013-AC is a genuine original equipment manufacturer (OEM) component engineered specifically for Cisco ASR1013 routers, ensuring full compatibility, safety certifications, and performance standards. OEM cable assemblies like this one are designed to handle the exact power specifications and mechanical requirements of your router without risk of damage or safety issues. We offer authentic Cisco parts to guarantee reliability in mission-critical network environments.