IVSN Group IVSN-TRACK-MOBILE-1 Inventory Software

The Dell 400-ATKY is an 8TB 3.5-inch internal hard drive featuring Near Line SAS (NL-SAS) interface with 12Gb/s SAS connectivity and 7200 RPM spindle speed. This enterprise-grade drive is designed for high-capacity storage applications in server and storage environments. We offer this drive as part of our comprehensive Dell storage solutions at barcodesinc.com.

The Dell 400-AMJW is a 1.60 TB SAS solid state drive designed for high-performance storage applications. This hot-swappable 2.5" internal drive uses 12Gb/s SAS connectivity, making it suitable for enterprise servers and storage systems requiring reliable, fast data access. We offer this drive as part of our comprehensive Dell component inventory for businesses needing enterprise-grade storage solutions.

The Dell PM1633a is a 3.84 TB solid state drive with a 2.5" form factor that uses a 12Gb/s SAS interface, making it ideal for server environments requiring high-speed data access. This enterprise-grade SSD delivers superior performance compared to traditional SATA drives and is designed for demanding server applications. We offer this drive as part of our comprehensive Dell storage solutions available from barcodesinc.com.

The Dell 400-AESU is a 200GB solid state drive with a 2.5" form factor and SAS (12Gb/s SAS) interface, designed as a hot-pluggable internal storage solution. This SSD is ideal for enterprise environments requiring reliable, high-speed storage with minimal latency. We offer this genuine Dell component for systems requiring solid-state performance upgrades.

The Dell 400-ATIS is a 2.5" internal hard drive with 900 GB capacity, operating at 15,000 RPM with a 12Gb/s SAS interface. This high-performance drive is designed for enterprise storage applications requiring fast data access and reliable performance in server and storage environments.

The Dell 400-ATHU is a Dell PX05SR 3.84 TB solid state drive featuring a 2.5" internal form factor with 12Gb/s SAS connectivity and a 3.5" carrier. It's designed as a read-intensive drive optimized for server environments and supports 512n format. We offer this enterprise-grade SSD for organizations requiring reliable high-capacity storage solutions.

The Dell 400-AFOV is a 2.5" internal SATA drive designed for Dell systems and compatible with most servers and workstations that support 2.5" SATA (SATA/600) form factors. Its hot-pluggable design allows for installation and replacement without powering down your system. Contact us today to verify compatibility with your specific hardware configuration.

The Dell 400-AFKH is an 800 GB solid state drive with a 2.5-inch form factor and SAS (12Gb/s) interface. This enterprise-grade SSD is designed for high-performance applications requiring fast data access and reliable solid-state storage in server and storage environments. We offer this drive as part of our comprehensive Dell storage solutions for warehouse and logistics operations.

The Dell 400-AUSX is a 3.84 TB solid state drive with a 2.5-inch form factor, using 12Gb/s SAS interface technology. This drive is hot-swappable and hot-pluggable, making it ideal for enterprise environments requiring minimal downtime during storage upgrades or replacements. We offer this genuine Dell component for organizations needing high-capacity, reliable storage solutions.

Yes, the Dell 400-AMJW drive features both hot-swappable and hot-pluggable capabilities, allowing for seamless replacement without system downtime. This makes it ideal for production server environments where continuous operation is critical. Contact us today to verify compatibility with your specific server model and infrastructure requirements.

The Dell PM1633a SSD features a 2.5" internal form factor with SAS (12Gb/s) connectivity, making it compatible with Dell servers and other enterprise systems that support SAS interfaces. Before purchasing, verify your server's drive bay configuration and SAS controller compatibility to ensure proper installation. Contact us today to confirm compatibility with your specific server model and infrastructure requirements.

The Dell 400-ATHU is a server device supported drive with SAS 12Gb/s interface and includes a 3.5" carrier for standard server mounting. Compatibility depends on your specific server model's SAS controller and drive bay configuration. Contact us today to verify compatibility with your existing infrastructure.

As a solid-state drive, the Dell 400-AFOV offers significantly faster data access speeds, improved system responsiveness, and greater reliability compared to mechanical hard disk drives. SSDs have no moving parts, making them more durable and resistant to physical shock, while consuming less power and generating less heat during operation.

The Dell 400-ATIS uses the SAS (Serial Attached SCSI) 12Gb/s interface, making it compatible with Dell servers and storage systems that support 2.5" SAS drives. We recommend verifying your server's drive bay specifications and controller compatibility before ordering—contact us today if you need assistance confirming compatibility with your specific system.

The Dell 400-AFKH uses the SAS (12Gb/s) interface, making it compatible with Dell servers and storage systems that support SAS drives in 2.5-inch form factors. For specific compatibility verification with your existing infrastructure, we recommend contacting our team today to review your exact server model and configuration requirements.

Yes, the Dell 400-AESU is specifically designed as a hot-pluggable drive, meaning it can be safely removed and installed without powering down your system. This feature is particularly valuable in enterprise servers and storage systems where uptime is critical. Contact us today to confirm compatibility with your specific Dell server model.

Yes, the Dell PX05SR 3.84 TB drive featured in the 400-AUSX model is fully hot-swappable and hot-pluggable, allowing you to replace or upgrade the drive without powering down your system. This capability is essential for data centers and server environments where continuous uptime is critical. Contact us today to confirm compatibility with your specific hardware configuration.

The Dell 400-ATKY NL-SAS drive is compatible with Dell PowerEdge servers and storage systems that support 3.5-inch SAS drives with 12Gb/s connectivity. For specific server model compatibility, we recommend contacting our team today—our product specialists can verify compatibility with your exact hardware configuration and ensure proper installation.

NL-SAS (Near Line SAS) drives like the Dell 400-ATKY are optimized for high-capacity, sequential workloads in RAID arrays and storage systems, offering excellent cost-per-terabyte value. Standard SAS drives prioritize faster random access and lower latency for transaction-intensive applications. The 400-ATKY's 7200 RPM NL-SAS design makes it ideal for nearline storage, backup, and archive applications where capacity matters more than ultra-low latency.

Solid state drives like the Dell PM1633a eliminate mechanical components found in traditional HDDs, delivering faster data access times, improved IOPS performance, and greater reliability for server workloads. The 12Gb/s SAS interface ensures data can transfer at maximum speeds, reducing latency in database and virtualization environments. Visit barcodesinc.com to learn more about how SSDs can enhance your server performance.

The Dell 400-ATHU provides 3.84 TB of storage capacity, making it suitable for enterprise applications requiring substantial data storage in a compact 2.5" form factor. This capacity is ideal for read-intensive workloads in server environments where space efficiency is important.

The 15,000 RPM SAS drive is ideal for high-performance enterprise environments including database servers, virtualization hosts, and RAID arrays where fast random access and sustained throughput are critical. The Dell 400-ATIS's 900 GB capacity makes it suitable for organizations requiring substantial storage capacity without sacrificing speed.

Yes, the Dell 400-AFOV is designed as a hot-pluggable drive, which means you can safely remove and replace it while your system is running without requiring a shutdown or restart. This feature is particularly valuable in server environments where uptime is critical.

The Dell 400-AFKH is well-suited for enterprise environments requiring high-speed data access, including database servers, virtual machine hosts, and I/O-intensive warehouse management systems. The solid-state design provides superior performance compared to traditional spinning drives, making it ideal for mission-critical logistics and inventory applications. Visit barcodesinc.com to explore how this drive can enhance your IT infrastructure.

The Dell 400-AUSX drive utilizes a 12Gb/s SAS (Serial Attached SCSI) interface, which provides high-speed data transfer and enterprise-grade reliability. SAS connectivity is standard in server and storage array environments where performance and redundancy are paramount. Visit barcodesinc.com to verify compatibility with your existing infrastructure.

The Dell 400-AESU uses a 12Gb/s SAS (Serial Attached SCSI) interface, which provides superior performance and reliability compared to older SATA connections. SAS drives are optimized for enterprise environments, offering better error recovery and multi-initiator support for server and storage array applications. Visit barcodesinc.com to explore compatible Dell server configurations.

The Dell 400-AMJW drive utilizes 12Gb/s SAS (Serial Attached SCSI) interface technology, delivering high-speed data transfer suitable for demanding enterprise applications. This interface standard ensures excellent performance for database servers, virtualization platforms, and high-I/O workloads. Visit barcodesinc.com to explore compatible controllers and systems for this drive.

The Dell 400-ATKY is well-suited for enterprise storage arrays, network-attached storage (NAS) systems, backup and archival solutions, and large-scale data center deployments. Its 8TB capacity and NL-SAS interface make it cost-effective for organizations managing large volumes of data that don't require the performance characteristics of high-speed SAS drives. Contact us today to discuss how we can support your storage infrastructure needs.

SAS (Serial Attached SCSI) offers higher performance, better reliability, and superior scalability compared to SATA drives, with support for dual-port configurations and hot-swapping in enterprise environments. The 12Gb/s SAS interface on the Dell 400-ATIS provides significantly faster data transfer rates than standard SATA drives, making it better suited for mission-critical applications.

The Dell 400-AFKH uses SAS (Serial Attached SCSI) at 12Gb/s, which provides higher bandwidth and better performance than standard SATA drives, along with superior reliability features for enterprise environments. SAS drives are designed for 24/7 operation in server and storage arrays, making them more suitable for demanding warehouse and logistics operations than consumer-grade SATA drives. Contact us today to determine if this enterprise-class drive meets your performance requirements.

The Dell 400-AFOV provides 400 GB of storage capacity and uses the SATA/600 interface, which supports data transfer rates up to 6 Gbps. This makes it suitable for applications requiring fast sequential read/write performance while maintaining compatibility with standard SATA infrastructure.

The Dell 400-ATHU uses a 12Gb/s SAS (Serial Attached SCSI) interface, which provides high-speed data transfer and is the standard for enterprise server storage. This interface ensures reliable performance in demanding data center environments. Visit barcodesinc.com to explore compatible SAS-enabled systems.

The Dell 400-AUSX features a 2.5-inch internal form factor, which is commonly used in enterprise servers, storage arrays, and high-density computing environments. This compact size allows for efficient space utilization in rack-mounted systems while maintaining the 3.84 TB capacity. We offer this drive as part of our comprehensive Dell parts inventory.

Yes, the Dell PM1633a is an enterprise-class SSD designed for server deployments where data reliability and performance are critical. Its solid-state architecture provides superior durability compared to mechanical drives, with no moving parts to fail. Our team can help you select the right storage configuration for your mission-critical infrastructure—contact us today for guidance.

The Dell 400-AMJW is a 2.5-inch internal solid state drive, making it compatible with compact server form factors and enterprise storage systems. Its smaller physical footprint allows for higher density storage configurations compared to 3.5-inch drives. Our team can help you determine if this drive meets your space and performance requirements.

The Dell 400-AESU offers 200GB of solid-state storage capacity, making it suitable for caching, high-performance databases, or primary storage in systems where speed is prioritized over maximum capacity. For enterprise deployments requiring larger storage volumes, we offer multiple Dell drive options. Contact us today for capacity planning assistance.

Yes, the Dell 400-ATIS SAS drive is fully compatible with enterprise RAID controllers and arrays, making it suitable for RAID 0, 1, 5, 6, and 10 configurations. Its 15,000 RPM speed and SAS interface make it an excellent choice for high-performance RAID setups in data centers and server environments.

The Dell 400-ATHU is optimized for read-intensive server applications where consistent performance and reliability are critical, such as database servers, virtualization hosts, and high-availability systems. The 3.84 TB capacity and enterprise-grade SSD technology make it suitable for organizations managing large datasets with frequent read operations.

The Dell PM1633a features a 2.5" internal form factor, which is the standard size for enterprise server storage in modern data center environments. This compact size allows for flexible deployment in various Dell server chassis and storage enclosures. Visit barcodesinc.com to verify compatibility with your specific server model or contact our team for detailed specifications.

The Dell 400-AFOV's hot-pluggable design, SATA/600 interface, and solid-state architecture make it well-suited for enterprise servers and data center deployments where reliability and uptime are essential. We offer this drive for organizations looking to upgrade their storage infrastructure with Dell-compatible components.

The Dell PX05SR SAS drive is designed for enterprise storage environments where RAID configurations are standard practice, providing the reliability and performance needed for redundant array setups. The 12Gb/s SAS interface and hot-swap capability make it well-suited for RAID implementations in servers and storage systems. Contact us today for guidance on configuring this drive within your RAID architecture.

Yes, the Dell 400-AESU's hot-pluggable SAS interface and enterprise-grade construction make it ideal for secondary storage, tiered storage configurations, or as a performance tier in hybrid storage systems. Many organizations use SSDs like this for database acceleration or high-I/O applications while maintaining traditional drives for archival storage. We can help you design the right storage configuration for your infrastructure.

The Dell 400-AFKH meets ENERGY STAR 5.0 and EPEAT standards, demonstrating compliance with environmental efficiency and sustainability requirements. These certifications ensure the drive operates efficiently while minimizing power consumption in your data center or server environment. We offer this environmentally responsible storage solution as part of our commitment to sustainable IT infrastructure.

Dell enterprise hard drives like the 400-ATKY are built to enterprise-class standards with rigorous testing and quality control for demanding 24/7 environments. While specific warranty details depend on your purchase configuration, we recommend contacting our team at barcodesinc.com to confirm the warranty terms and support options available with your order.

The Dell 400-AMJW's hot-swappable design and standard SAS interface make it suitable for upgrading or replacing existing 2.5" SAS drives in compatible systems. However, compatibility depends on your specific server model and RAID configuration. Contact us today to ensure proper compatibility and get expert guidance on your upgrade path.

The 8TB capacity of the Dell 400-ATKY provides significantly higher storage density than smaller drives, reducing the number of drive bays required and lowering power consumption per terabyte in your storage infrastructure. This makes it more cost-effective for large-scale deployments where capacity is the primary requirement. Visit barcodesinc.com or contact us today to explore how consolidating to higher-capacity drives can optimize your storage architecture and reduce total cost of ownership.

As a Dell enterprise SSD, the 400-AMJW is engineered for data center reliability with enterprise-grade performance standards. Solid state technology eliminates mechanical failure points found in traditional hard drives, providing superior durability for mission-critical applications. Visit barcodesinc.com or contact our team to discuss data protection strategies and RAID configurations for your environment.

The Dell 400-AUSX drive meets ENERGY STAR 5.0 and EPEAT standards, ensuring compliance with environmental regulations and energy efficiency requirements. These certifications demonstrate Dell's commitment to sustainable manufacturing practices and reduced operational power consumption. We provide genuine Dell components that meet all applicable environmental and regulatory standards.

The 12Gb/s SAS interface provides higher bandwidth, better command queuing, and improved multi-initiator capabilities compared to SATA, making it the preferred choice for enterprise servers and storage systems. SAS drives are engineered for 24/7 operation in demanding server environments with higher reliability ratings. We offer both SAS and SATA storage solutions—contact us today to determine which interface best fits your server infrastructure needs.

We offer the Dell 400-AFKH drive as a genuine Dell component through our extensive inventory of enterprise storage solutions and AIDC products. Our team can help you source this drive quickly and efficiently for your warehouse management systems or server upgrades. Visit barcodesinc.com today or contact us to place your order and receive expert guidance on storage solutions for your logistics operations.

We offer the Dell 400-AFOV Drive as part of our comprehensive selection of storage solutions and AIDC equipment. Visit barcodesinc.com to check availability, or contact us today for pricing, compatibility verification, and technical support from our knowledgeable team.

The Dell 400-AESU is a genuine enterprise-class SSD with SAS connectivity, designed for 24/7 server and storage array environments with strict reliability and performance requirements. Unlike consumer SSDs, enterprise drives like this one feature enhanced error correction, better thermal management, and compatibility with redundant storage systems. Available from us with full manufacturer support and warranty coverage.

As a solid state drive, the Dell 400-ATHU offers significantly faster read/write speeds, lower latency, and improved reliability compared to traditional mechanical hard drives. The SSD technology eliminates moving parts, reducing failure rates and power consumption while delivering superior performance for enterprise workloads. Contact us today to discuss whether this SSD or alternative storage solutions best fit your needs.

The Dell 400-ATIS is listed as discontinued in our inventory. However, we maintain stock of comparable Dell SAS drives and can help you find suitable alternatives for your storage needs. Visit barcodesinc.com or contact us today to explore current drive options or discuss legacy system support.