Intermec 825-163-002 Spare Parts

Print width and speed are the main differences. The Zebra ZT610 prints up to 4.09 in. (104 mm) wide at up to 14 ips (356 mm/sec), while the ZT620 prints up to 6.6 in. (168 mm) wide at up to 12 ips (305 mm/sec). Resolution options are 203 dpi standard and 300 dpi optional on both models, with 600 dpi available on the ZT610 only.

Media handling differs accordingly: the ZT610 accepts media from 1.00 in. (25.4 mm) to 4.5 in. (114 mm) in tear/cutter mode, the ZT620 from 2.00 in. (51 mm) to 7.0 in. (178 mm). The ZT620 is also wider and heavier at 13.44 in. (341.45 mm) and 57.4 lbs (26 kg), versus 10.56 in. (268.2 mm) and 50 lbs (22.7 kg) for the ZT610. Choose the ZT620 for wide labels such as pallet and shipping placards, and the ZT610 for standard 4-inch label work or when 600 dpi is required.

Yes. The Zebra ZT600 Series RFID encoder is user-upgradeable in the field and available on both the 4-inch ZT610 and 6-inch ZT620 models. Zebra states the field upgrade takes about five minutes, so a printer purchased without RFID can be converted as tracking requirements evolve rather than replaced.

This makes the ZT600 Series a hedge against uncertain RFID timelines: deploy the printers now for barcode label work, then add encoding when a customer mandate or internal item-level tracking program arrives.

The Zebra ZT600 Series supports tags compatible with UHF EPC Gen 2 V2, ISO/IEC 18000-63 and RAIN RFID protocols. It supports industry-standard, multi-vendor chip-based serialization and block permalocking of user memory compatible with ATA Spec 2000, and includes RFID job-monitoring tools for tracking encoding performance.

Adaptive Encoding Technology automatically selects the optimum encode settings for the media loaded, which removes the need for complex inlay placement guides and simplifies RFID calibration. Zebra's RFID technology is certified on six continents, supporting multinational supply chain deployments.

The Zebra ZT600 Series can encode inlays spaced at a pitch of 0.6 in. (16 mm) or narrower on most RFID inlays — tighter than competing printer/encoders accommodate. Because the inlays sit closer together, label converters use less material per roll, which lowers the cost per label.

Tighter spacing also means more labels per roll, so operators change media rolls less often and printer throughput increases. On high-volume item-level tagging programs, the media saving typically outweighs the hardware cost difference.

Standard connectivity on the Zebra ZT600 Series includes USB 2.0 high-speed, RS-232 Serial, Gigabit Ethernet, USB Host and Bluetooth 4.0. Optional additions include parallel, 802.11ac wireless, an applicator port, IPv6 (via an external dongle on the parallel port) and BTLE. Two open communication slots accept internal cards for future protocols or failover connections.

Zebra Link-OS provides real-time visibility and control of printers on-site or remotely, with cloud-accessible apps for setup, management and troubleshooting. Web View allows browser-based control via ZPL II, and printers with ZebraNet print servers send email alerts to minimize downtime. Firmware supports ZPL and ZPL II, XML-enabled printing and the optional ZBI 2.0 programming language for stand-alone applications.

The Zebra ZT600 Series is a line of industrial thermal printers that both print and encode RFID labels in a single pass. The series comprises two models — the 4-inch ZT610 and the 6-inch ZT620 — each built on an all-metal frame with a bi-fold metal media cover, side-loading supplies path and a thin film printhead with E3 Element Energy Equalizer for print quality.

Both models support thermal transfer and direct thermal printing and are designed for manufacturing and transportation and logistics environments where dust, debris, moisture and temperature extremes would disable a lighter printer. RFID encoding is delivered by an integrated encoder that can be ordered from the factory or installed later in the field.

At a 1 Hz blink rate, the Zebra UWB Tag can continuously track an asset for over 7 years on a single 3V coin cell battery. Battery life varies based on the programmed transmission rate—higher blink rates will reduce battery longevity. We offer these tags with configurable blink rates to match your operational needs.

The Zebra MB1000 features a fixed CR2032 220mAh coin cell battery with an operational life of up to 5 years. This extended battery longevity is achieved through Bluetooth Low Energy technology and ultra-low RF transmit powers, making it ideal for long-term asset tracking deployments in warehouses and industrial environments.

Yes, the ZT620R features a field-upgradeable RFID encoder that can be installed in just five minutes without factory service. This allows you to add RFID encoding capabilities to your existing printer when your business needs evolve, making it a future-proof investment that grows with your operation.

The Fargo DTC1250e uses dye-sublimation printing for vivid color and accurate images, as well as thermal transfer or resin thermal transfer for sharp black text and barcodes. This direct-to-card printing technology produces high-quality ID cards suitable for student IDs, employee badges, and access control applications.

The ET56 is built to handle drops to concrete, rain, snow, dust, extreme heat, subzero temperatures, spilled liquids, and full-force hose-downs. With Corning® Gorilla® Glass for shatter and scratch resistance, plus vibration testing for vehicle use, this tablet delivers reliable operation in virtually any warehouse, field service, or logistics setting. We offer an optional rugged frame that extends the concrete drop specification from 3.2 ft. to 5.9 ft., providing even greater protection for demanding environments.

The MB1000 seamlessly integrates with commercial Android and iOS devices, and is compatible with Zebra MotionWorks solutions. It also supports third-party solutions and can be customized through Zebra's SDK for flexible deployment across various industries including warehouses, factories, and hospitals.

The model you're viewing is single-sided only, but we offer the Fargo DTC1250e as both a single-sided and dual-sided option. If you need dual-sided printing for additional space on your ID cards for logos, cardholder information, or security features, contact us today to explore the dual-sided version available from us.

Zebra UWB Tags deliver real-time location accuracy better than 30 cm (1 foot) line of sight. This exceptional accuracy is achieved through extremely short-duration UWB pulse transmissions, which also allow thousands of tags to be simultaneously located. Contact us today to discuss accuracy requirements for your specific application.

The ZT620R delivers fast print speeds of up to 14 inches per second with thermal transfer and direct thermal printing capabilities. It features a thin film printhead with E3™ Element Energy™ Equalizer technology to ensure superior print quality across a wide range of applications.

Yes, the ET56 model includes LTE support for dependably fast cellular connections in the field, complementing its 802.11 WiFi capability. This dual connectivity ensures your workers maintain constant connection whether they're in your facility or deployed across remote locations, improving productivity and customer service quality. Contact us today to confirm LTE band compatibility for your region.

The MB1000 features three beacon modes: Battery Save mode for extended battery life, iBeacon mode for standard proximity-based applications, and MPact mode for Zebra-specific implementations. These modes allow you to optimize performance based on your specific asset tracking and location solution requirements.

The DTC1250e comes standard with USB connectivity. We also offer optional Ethernet connectivity with an internal print server for remote printer sharing across a network, and optional Wi-Fi capability that can be added to enable convenient access to your ID card printer anytime, anywhere.

The ET56 offers multiple scanning solutions: integrate the Zebra SE4710 scan engine for light scanning or SE4750 for moderate to heavy scanning via the expansion back, pair any Zebra Bluetooth scanner wirelessly, or use the integrated 8MP rear-facing camera for occasional imaging. All scanning options leverage Zebra's PRZM Intelligent Imaging and advanced algorithms to capture 1D and 2D barcodes reliably, even when damaged, dirty, or poorly printed. Visit barcodesinc.com to explore our complete range of compatible Zebra scanners and expansion options.

Yes, Zebra UWB Tags are compliant with the International UWB Standard IEEE 802.15.4f and ISO-24730-61. The tags can be configured to operate in either native Zebra format or ISO/IEEE format, and our UWB Sensors are also ISO/IEEE compliant. This standards-based approach protects your infrastructure investment and ensures compatibility with other compliant tags available from us.

The ZT620R can accommodate RFID inlay spacing (pitch) as close as 0.6"/16 mm or narrower, which is smaller than many competing encoders can handle. By spacing inlays closer together, label converters use less material per label, reducing your cost per label, requiring fewer media roll changes, and enabling faster throughput.

Zebra UWB Tags have a long RF range of up to 200 meters (650 feet). The tags emit short ultra-wideband pulses that are detected by Zebra's UWB Sensors, which connect to the UWB Hub to determine real-time location. Visit barcodesinc.com to learn more about our complete UWB ecosystem.

Yes, the MB1000 is constructed with ruggedized materials that withstand common industrial cleaning agents and operates reliably in standard industrial temperature ranges of 32°F to 104°F (0°C to 40°C). Its durable design and compact form factor (1.46" x 1.06" x 0.44") make it well-suited for deployment in complex warehouse and factory settings.

The ZT620R comes standard with Serial, USB 2.0, Gigabit Ethernet, USB Host, and Bluetooth 4.0 connectivity. Optional connectivity includes Parallel, 802.11a/c Wi-Fi, Applicator Port, IPv6, and BTLE capabilities, plus two open media slots for non-standard connectivity options and future protocol provisioning.

The Fargo DTC1250e is designed to print on cards ranging from 9 mil to 40 mil thick, allowing you to use sophisticated access control badges and smart cards in addition to standard ID cards.

The ET56 features a removable battery that allows workers to swap in a fully charged unit without taking the tablet out of service, ensuring perpetual 24x7x365 power availability. You can add an optional hot-swappable battery via the innovative expansion back to more than double battery run time for extended shifts. This design eliminates downtime and keeps your warehouse and field teams productive throughout the longest operational periods.

The ET56 is available in two sizes: a compact 8.4-inch model ideal when size and weight are critical, and a full-size 10.1-inch model optimized for information-intensive applications requiring maximum display area. Both feature class-best brightness for excellent readability in virtually any lighting condition, including bright sunlight, making them equally suitable for warehouse, retail, and field service environments. The 10.1-inch model provides more screen real estate for complex workflows, while the 8.4-inch excels in mobile, wearable scenarios.

Yes, Zebra UWB Tags are IP67 rated, making them fully dust and waterproof for both indoor and outdoor use. The tags are also UL 913 certified for Class 1 Division 1, Groups A-D, T4 environments. Available from us in two form factors—a circular tag for assets and a low-profile badge tag for personnel.

The MB1000 utilizes Bluetooth 4.1 (Bluetooth Low Energy) technology for efficient, low-power proximity-based location solutions. It includes 128-bit AES encryption for secure communications, protecting your asset tracking data while maintaining the low power consumption needed for extended battery life.

The ZT620R features a durable all-metal frame and bi-fold metal media cover designed to withstand extreme temperatures, dust, debris, moisture, and other challenging conditions. Its robust construction virtually eliminates operational downtime due to printer failure, making it ideal for demanding manufacturing, transportation, and logistics environments.

Yes, the DTC1250e fully supports QR (Quick Response) code printing, which allows you to encrypt data specifically for smartphones and drive traffic to your organization's website. To print QR codes, you'll need ID card software capable of QR code printing, such as Asure ID Express.

Zebra UWB Tags are easily configured using the Zebra UWB Wand, a small wireless transmitter that allows you to turn tags on/off and set transmission rates across a wide range of blink rates from 0.01 Hz to 200 Hz. The UWB Wand can configure up to 100 tags at once within its low-frequency range. Contact us today for setup support and training.

Yes, the MB1000 supports over-the-air updates and configuration options through Zebra's SDK, allowing you to adjust settings and optimize beacon performance without physical access to the devices. This capability makes it easy to manage large deployments and adapt to changing operational needs in your warehouse or facility.

The ZT620R includes Zebra's Link-OS software platform, which provides real-time visibility and control of your printing systems both on-site and remotely through cloud-accessible applications. The printer features a highly visible color display that turns red during error states for quick status recognition, plus onboard sensors, diagnostics, and help resources to manage issues independently.

The Fargo DTC1250e is backed by a 3-year printer and printhead warranty, including one no-questions-asked printhead replacement to ensure maximum value from your investment. We also offer FREE 1 Year TrueSupport with the purchase of a 3 or 4 year True Support Plan when you buy from us.

We offer an extensive accessory family including wall and desktop charging stations, the unique ShareCradle for multi-device charging, vehicle cradles for forklifts and trucks, and docking stations with USB, Ethernet, and HDMI connectivity. The innovative Expansion Back allows you to add a rotating handstrap or integrated scan engines, while flexible cases provide three wearable options—belt holster, over-the-shoulder strap, or cross-body carry. Contact us today to build a customized ET56 solution tailored to your warehouse, logistics, or field service requirements.