Intermec 1-206012-900 Accessory
Intermec EasyCoder PM4i Accessory Model Overview
Frequently Asked Questions
What are the 10GbE connectivity options available on the Cisco VS-S2T-10G?
The Cisco VS-S2T-10G Supervisor provides 2 x 10GbE ports with multiple SFP+ module options for flexible connectivity. We offer support for copper coax modules (SFP-H10GB-CU1M, CU3M, CU5M) ranging from 1 to 5 meters, as well as multimode fiber (SFP-10G-SR/SR-S) up to 400 meters and single-mode fiber (SFP-10G-LR/LR-S) up to 10 kilometers. This allows you to configure the supervisor for your specific network topology and distance requirements.
What Gigabit Ethernet and 1G connectivity options does this supervisor support?
The VS-S2T-10G includes 3 x 1G ports with comprehensive SFP module support for Gigabit connectivity. Available options include multimode fiber (MGBSX1 at 500m, GLC-SX-MMD at 550m), single-mode fiber (MGBLX1 at 10km, MGBLH1 at 40km, GLC-LH-SMD at 10km), and copper UTP Category 5e (MGBT1, GLC-TE at 100m). This flexibility enables you to mix and match connectivity based on your existing infrastructure and distance requirements.
What network standards and protocols does the Cisco VS-S2T-10G support?
The supervisor supports comprehensive IEEE networking standards including 802.1D Spanning Tree, 802.1q VLAN, 802.1w Rapid Spanning Tree, 802.1x Port Access Authentication, 802.3ad Link Aggregation (LACP), and 802.3 full-duplex Ethernet. It also includes IGMP snooping, RADIUS authentication, SNMPv3 management, and VLAN Trunking Protocol support, making it suitable for enterprise-grade network deployments. Contact us today to discuss which standards align with your network architecture.
Is the Cisco VS-S2T-10G suitable for warehouse and logistics network infrastructure?
Yes, the VS-S2T-10G is an excellent choice for warehouse and logistics environments requiring high-speed data routing and redundancy. With 2 x 10GbE uplinks and 3 x 1G ports, it provides the throughput needed for RFID readers, barcode scanners, mobile computers, and label printers distributed across your facility. The supervisor's support for multiple fiber and copper connectivity options allows flexible deployment in various warehouse layouts. Visit barcodesinc.com to explore how this router integrates with your AIDC infrastructure.
What management and monitoring capabilities are included with the VS-S2T-10G?
The supervisor provides enterprise-grade management through SNMPv3, RMON-MIB with statistics and event monitoring, and support for RFC-compliant protocols including TFTP, FTP, and Telnet. It includes device-level GUI management with embedded access and supports multiple MIB standards (RFC1213-MIB, CISCO-PRODUCTS-MIB, CISCO-SYSLOG-MIB, CISCO-ENVMON-MIB). These capabilities enable centralized monitoring and troubleshooting of your network infrastructure.
What are the operating and storage environmental specifications for the VS-S2T-10G?
The supervisor operates reliably in temperatures from 5 to 40°C (41 to 104°F) with 10 to 85% relative humidity, and can be stored at temperatures from -40 to 70°C (-40 to 158°F) with 5 to 95% humidity. These specifications ensure stable performance in controlled data center and network closet environments typical of warehouse and logistics facilities. Contact us today to discuss installation requirements for your specific location.
