Honeywell PS-120-1500D-NA Power Device

The Cisco SM-X-NIM-ADPTR is a network interface module adapter designed for Cisco ISR 4000 series routers that enables the installation of a single NIM (Network Interface Module) into compatible chassis. This adapter allows you to expand your router's connectivity options by supporting various NIM modules for switching, voice, data, and broadband applications. We offer this accessory as part of our complete Cisco networking components lineup.

The Cisco ONS-XC-10G-L2 is an XFP transceiver module designed for OC192/STM64 long-reach (LR2) connectivity at 1550nm wavelength over single-mode fiber with LC connectors. This module supports 10 Gigabit Ethernet applications and is commonly used in long-distance telecommunications and data center interconnect scenarios. We offer this module as part of our comprehensive Cisco networking components inventory.

The Cisco Nexus 9372TX features 48 ports of 1/10G-T Ethernet connectivity and 6 ports of 40G QSFP+ for high-speed uplink capacity. This configuration provides flexible options for both access-layer and aggregation-layer deployments in modern data center environments. We offer this model as part of our comprehensive Cisco Nexus switching portfolio.

The ONS-XC-10G-L2 provides 10 Gigabit connectivity using single-mode fiber (SM) with LC connectors, operating at the 1550nm wavelength band for long-reach applications. The LR2 designation indicates extended transmission distance capability suitable for metropolitan and wide-area network deployments. Contact us today to verify compatibility with your specific network architecture.

Yes, the N9K-C9372TX includes 2 redundant AC power supplies with 89-91% efficiency at 220V, supporting input voltages from 100-240 VAC at 50-60 Hz frequencies. This redundancy ensures continuous operation even during single power supply failures, making it suitable for mission-critical environments. Contact us today for deployment guidance on power infrastructure requirements.

The SM-X-NIM-ADPTR is designed for Cisco ISR 4000 series integrated services routers, providing a standardized interface for NIM module installation. This adapter supports the modular architecture that allows you to customize your router with specific functionality based on your networking requirements. For specific compatibility with your exact router model, contact us today and our team can verify your configuration.

Yes, the ONS-XC-10G-L2 is designed to support standard 10 Gigabit Ethernet interfaces and complies with IEEE 802.3z and IEEE 802.3x standards for fiber connectivity. It integrates with Cisco routing and switching platforms that support XFP transceiver modules and 10G optical interfaces. Visit barcodesinc.com or contact us today to confirm compatibility with your specific equipment.

The N9K-C9372TX provides 70 MB of packet buffer memory and 128 GB of boot flash memory for storing configuration files and system images. The substantial buffer size enables efficient handling of traffic bursts and supports advanced QoS policies in high-throughput network scenarios. Visit barcodesinc.com to explore our full range of Cisco Nexus switching solutions.

The SM-X-NIM-ADPTR supports a wide range of Cisco NIM modules including switch network modules (like the 4-port and 8-port Gigabit Ethernet NIMs), voice modules (FXO, FXS, BRI, E/M), DSL/broadband modules (VDSL2, ADSL, G.SHDSL), and channelized T1/E1 modules. This flexibility allows you to tailor your ISR configuration to support switching, VoIP, WAN connectivity, and data services as needed. Visit barcodesinc.com to explore compatible NIM modules available from us.

The number of NIM adapters you can install depends on your specific ISR 4000 router model and its available slot configuration. Most ISR platforms support multiple NIM slots, allowing you to expand connectivity for various applications simultaneously. Contact us today so our team can review your router specifications and recommend the appropriate number of adapters for your deployment.

The switch operates reliably in temperatures from 32-104°F (0-40°C) with relative humidity levels of 5-95% non-condensing, and supports operating altitudes up to 13,123 feet. Its compact 1.75 x 17.29 x 25.4 inch form factor and 30-pound weight make it suitable for standard rack installations in diverse data center environments. We offer comprehensive support for environmental specifications and installation planning.

The ONS-XC-10G-L2 is classified as a long-reach (LR2) module, enabling extended transmission distances over single-mode fiber, making it ideal for long-haul telecommunications and inter-data center connections. The specific maximum distance depends on fiber quality and network conditions, but LR2 modules typically support distances significantly greater than standard short-reach modules. Contact us today for detailed specifications for your deployment scenario.

The SM-X-NIM-ADPTR is a plug-in module designed for standard ISR 4000 chassis installation and operates within the environmental parameters of the host router. The adapter itself is a passive interface component with no additional power or cooling requirements beyond what the router provides. For detailed environmental specifications and installation guidelines, contact us today and we can provide complete technical documentation.

Cisco equipment utilizing the ONS-XC-10G-L2 supports comprehensive management through SNMPv3, RMON-MIB, and embedded device management interfaces, enabling real-time monitoring of optical module performance and network statistics. These modules integrate with standard network management platforms and support RFC-compliant monitoring protocols for enterprise network visibility. We offer complete support and documentation for integrating these modules into your management infrastructure.

The N9K-C9372TX supports up to 24 EtherChannels in normal mode, with each EtherChannel capable of aggregating up to 24 ports for load balancing and link redundancy. This extensive EtherChannel support enables sophisticated traffic distribution and high-availability network designs. Contact us today for architecture recommendations tailored to your network topology.

We offer the Cisco SM-X-NIM-ADPTR as part of our comprehensive Cisco networking product catalog, with competitive pricing and reliable delivery. Our team provides technical support to ensure you select the correct adapter and compatible NIM modules for your specific network architecture. Visit barcodesinc.com or contact us today to place your order and discuss your networking requirements with our experts.

Yes, the ONS-XC-10G-L2 can be deployed in high-availability architectures that leverage Cisco technologies such as Virtual Port Channel (vPC), Equal-Cost Multipath (ECMP) routing, and Spanning Tree Protocol variants for network resilience. These modules support hot-swappable deployment in systems with redundant power and cooling, enabling continuous operation during maintenance. Contact us today to design a resilient network solution using these components.

The switch features six individual hot-swappable fans in a 5+1 redundant configuration with support for both forward and reversed airflow schemes to accommodate various rack orientations and cooling infrastructure. Forward airflow draws air through ports and exhausts through the fan tray and power supplies, while reversed airflow operates in the opposite direction for flexible deployment options. Visit barcodesinc.com to discuss cooling requirements for your specific installation environment.