Full specifications (PDF)
Host Interface:
Wiegand
HID 921NTNTEK00000 Access Control Reader
Part Number:
921NTNTEK00000
Model:
iCLASS RK40 6130
HID iCLASS RK40 6130 Access Control Reader Model Overview
The HID iCLASS® RK40 and RWK400 Readers are cutting-edge 13.56 MHz contactless smart card readers designed for superior access control and user convenience. Featuring dual-factor authentication, these readers enhance security by combining secure PINs with iCLASS® card verification. The elegant, rugged design includes a weatherproof keypad with backlit numbers, ensuring functionality in any lighting condition. These versatile readers are simple to integrate with new and existing systems using Wiegand output, making them ideal for various applications, from corporate facilities to secure transit environments.
Key features:
- Dual-Factor Authentication: Combines secure PINs with iCLASS® card authentication.
- Flexible Configuration: Compatible with various PIN pad outputs.
- Backlit Keypad: Facilitates operation in low-light conditions.
- Read/Write Capability: RWK400 model supports data storage and retrieval.
- Robust Design: Weather-resistant polycarbonate housing for durability.
Specifications:
- Power Supply: 5-16 VDC
- Current Requirements: 85mA AVG / 116mA PEAK (RK40); 85mA AVG / 132mA PEAK (RWK400)
- Operating Temperature: -31° to 150° F (-35° to 65° C)
- Humidity: 5% to 95% relative, non-condensing
- Dimensions: 3.3" x 4.8" x 1.1" (8.5 cm x 12.2 cm x 2.8 cm)
- Environmental Rating: IP55
- Compatibility: iCLASS, MIFARE, DESFire credentials
HID 921NTNTEK00000 Access Control Reader Overview
Using 13.56 MHz contactless smart card technology, the iCLASS® RK40 and RWK400 provide a powerful solution. Combine a contactless card presentation with a personal identification number (PIN) to support dual authentication of identity. Or, configure the panel for single-factor authentication, using only a card or a PIN.
The PIN can be verified either at the access control panel or locally by the keypad reader. When verified locally, the PIN must be programmed into the iCLASS card using the iCLASS Card Programmer (CP400).
The RWK400 offers the same features as the RK40, with the extended ability to read/write user data to HID iCLASS credentials. Read/write applications include the storage/retrieval of data such as biometric templates, health records, time and attendance, and digital cash. The possibilities are endless!
Featuring crisp architectural styling, the keypad reader and reader/writer have an elegantly curved faceplate. The 12-position weatherproof keypad uses discrete switches to provide positive tactile response, optionally reinforced by an audible tone. The keypad also features a waterproof silicone rubber boot, vandal-resistant metal keycaps, and backlit numbering.
The readers are equipped with a Wiegand output that easily interfaces with most existing access control panels. The RWK400 is equipped with bi-directional communications of RS232, RS485 (full-duplex), UART or USB to enable host controlled reader behavior. In addition, uni-directional communication of RS232, RS485 (full-duplex) or UART is enabled when the reader is running its own internal applications. In addition the RK40 can be configured to output data over Clock-andData hardware interface.
The PIN can be verified either at the access control panel or locally by the keypad reader. When verified locally, the PIN must be programmed into the iCLASS card using the iCLASS Card Programmer (CP400).
The RWK400 offers the same features as the RK40, with the extended ability to read/write user data to HID iCLASS credentials. Read/write applications include the storage/retrieval of data such as biometric templates, health records, time and attendance, and digital cash. The possibilities are endless!
Featuring crisp architectural styling, the keypad reader and reader/writer have an elegantly curved faceplate. The 12-position weatherproof keypad uses discrete switches to provide positive tactile response, optionally reinforced by an audible tone. The keypad also features a waterproof silicone rubber boot, vandal-resistant metal keycaps, and backlit numbering.
The readers are equipped with a Wiegand output that easily interfaces with most existing access control panels. The RWK400 is equipped with bi-directional communications of RS232, RS485 (full-duplex), UART or USB to enable host controlled reader behavior. In addition, uni-directional communication of RS232, RS485 (full-duplex) or UART is enabled when the reader is running its own internal applications. In addition the RK40 can be configured to output data over Clock-andData hardware interface.
Interfaces/Ports
Physical Characteristics
Product Color:
Black
Height:
4.8"
Width:
3.3"
Depth:
1.1"
Miscellaneous
Additional Information:
The iCLASS RK40 read only contactless smart card reader with keypad:
- 15693 - read only; 2kbits (256Bytes) and 16kbits (2kBytes) iCLASS credentials
- 14443A - read only; MIFARE® Standard (serial number)
- 14443B2 - read only; 16kbits (2kBytes) iCLASS credentials
Environmentally Friendly:
Yes
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty:
Lifetime
Item Numbers
GTIN:
7106221440243
EAN:
7106221440243
UNSPSC:
43201815
Questions? Get help from
an ID Expert!
an ID Expert!
The HID 921NTNTEK00000 Access Control Reader is also known as
HID-921NTNTEK00000
