Epson S015337 Ribbon

The FS80 is a high-performance fixed industrial scanner designed to read barcodes on fast-moving objects at distance, with multiple sensor options available in 5MP, 9MP, 12MP, and 16MP resolutions. Its advanced imaging system, combined with high-powered illumination and multiple lens selections, enables precise barcode decoding across various lighting conditions and distances. We offer this scanner with a standard 2D barcode decoder and optional Deep Learning OCR capabilities for enhanced data capture.

The Cisco Catalyst 9166I AP supports 802.11n version 2.0 with 2x2 MIMO and two spatial streams, delivering PHY data rates up to 444.4 Mbps with 40 MHz channels on 5 GHz and 20 MHz on 2.4 GHz. It includes advanced features like Maximal Ratio Combining (MRC), packet aggregation (A-MPDU and A-MSDU), and 802.11 Dynamic Frequency Selection for optimized performance in enterprise environments.

The Cisco Catalyst 9166I AP supports Wi-Fi 6E with tri-band 4x4 configuration, delivering next-generation wireless performance for demanding enterprise environments. This access point is designed for indoor/outdoor deployment and provides enhanced throughput and capacity compared to previous generation models. Contact us today to discuss which Cisco access point best fits your wireless infrastructure needs.

The Cisco Catalyst 9162 Series supports 802.11n version 2.0 with 2x2 MIMO and two spatial streams, delivering PHY data rates up to 444.4 Mbps when configured with 40 MHz channels on 5 GHz and 20 MHz on 2.4 GHz. It also supports 802.11a/g standards with Maximal Ratio Combining (MRC) and packet aggregation capabilities including A-MPDU and A-MSDU for optimized performance.

The Cisco Catalyst 9164I AP supports 802.11n version 2.0 with 2x2 MIMO and two spatial streams, delivering PHY data rates up to 444.4 Mbps using 40-MHz channels on 5 GHz and 20-MHz channels on 2.4 GHz. It includes advanced features like Maximal Ratio Combining (MRC), packet aggregation (A-MPDU and A-MSDU), and 802.11 Dynamic Frequency Selection for reliable performance in enterprise environments.

The Cisco Catalyst 9164I AP supports Wi-Fi 6E (802.11ax) with tri-band 4x4 MIMO technology, delivering advanced wireless performance for modern enterprise networks. This access point is compatible with Cisco Catalyst 9800 Series Wireless Controllers and supports the latest Cisco IOS XE software releases for seamless integration into your infrastructure. Contact us today to learn how this next-generation AP can enhance your wireless deployment.

The Cisco WAP571-A-K9-RF is a Wireless AC/N Premium Dual Radio Access Point that supports IEEE 802.11a/b/g/n standards with 2.4-GHz and 5-GHz transceivers. This dual-radio design delivers robust signals across both frequency bands, providing flexible coverage options for various deployment scenarios. We offer this model for organizations requiring enterprise-grade wireless connectivity.

The Cisco WAP150-A-K9-NA-RF is a Wireless AC/N Dual Radio Access Point that supports IEEE 802.11a, 802.11b, 802.11g, and 802.11n standards, providing backward compatibility with legacy devices while delivering modern dual-radio performance. This makes it suitable for mixed-environment deployments where you need to support both older and newer wireless clients. We offer this model as part of our comprehensive wireless networking solutions for enterprise environments.

The Cisco UCS-NVMEM6-W1600 is a 1.6TB 2.5-inch U.2 NVMe drive featuring WD SN840 Extreme Performance storage technology. This enterprise-grade NVMe solution is designed for high-performance server environments requiring fast data access and reliable storage. We offer this Cisco component as part of our comprehensive server parts inventory available from barcodesinc.com.

The Cisco UCSX-210C-M7 supports dual processors with Intel Xeon options including Bronze, Silver, Gold, and Platinum generations. This flexibility allows you to scale performance based on your workload requirements, from entry-level to high-performance computing needs. We offer this server with full technical support to help you select the right processor configuration for your infrastructure.

The Cisco UCSX-X10C-PT4F supports Intel Xeon processors across Bronze, Silver, Gold, and Platinum families, providing flexibility for various workload requirements from general-purpose computing to high-performance applications. This multi-tier processor support allows you to optimize cost and performance based on your specific infrastructure needs. We offer these servers configured with your choice of processor tier to match your deployment requirements.

The Cisco UCS-NVMEI4-I3840 features a 3.8TB 2.5-inch U.2 form factor NVMe drive, delivering high-performance storage for demanding enterprise workloads. This capacity is ideal for applications requiring fast data access and reduced latency in virtualized environments. We offer this Cisco server component as part of our complete UCS infrastructure solutions.

The Cisco CP-8811-3PWNAK9-RF is a multi-platform IP phone that combines wired and wireless connectivity with a power cube included in the package. This desk phone supports VoIP communications and is designed for professional office environments requiring flexible deployment options. We offer this model as part of our comprehensive Cisco telecommunications product line available from barcodesinc.com.

The Cisco UCSX-X10C-RAIDF supports Intel Xeon processors across multiple generations, including Xeon Bronze, Silver, Gold, and Platinum options. This flexibility allows you to choose the processor tier that best matches your workload requirements and budget. We offer these servers configured with your preferred processor specifications.

The Cisco CP-8841-3PWNAK9-RF is a multi-platform IP phone that comes with a Power Cube 4 for flexible deployment options. This model supports VoIP communications and is designed for desktop use, making it suitable for warehouse offices, logistics centers, and IT procurement environments. We offer this Cisco telecommunications product as part of our comprehensive desk phone inventory.

The Cisco WS-C3560CX12PDS-RF is a 12-port Gigabit Ethernet switch with Power over Ethernet (PoE) capability and 10G uplink support, making it ideal for access-layer deployments in small enterprise and branch-office environments. This Layer 3 switch supports both twisted pair and optical fiber connectivity through 2 SFP slots, and includes advanced networking features such as quality of service (QoS), access control lists (ACLs), and multicast management. We offer this refurbished unit with a lifetime limited warranty, providing cost-effective enterprise-class switching capabilities.

The Cisco WS-C3650-48FQ-L-RF is a 48-port manageable Ethernet switch supporting 10/100/1000Base-T and 10GBase-X connectivity with full Power over Ethernet (PoE) capabilities. It features a 1U rack-mountable form factor, supports Layer 2 switching, and includes modular design with support for both twisted pair and optical fiber connections. We offer this refurbished switch with a lifetime limited warranty, making it an excellent choice for enterprise network deployments.

The Cisco CP-8851-3PWNAK9-RF is a multi-platform IP phone that combines corded and cordless functionality with a power cube. It supports VoIP communications and is designed for desktop or wall-mounted deployment in enterprise environments. This model offers flexible connectivity options suitable for modern office and warehouse communication needs.

The Cisco Catalyst 3850 series represents a newer generation with enhanced capabilities compared to the 3650 series. The 3850-48P-E-RF offers advanced IP Services features and higher performance for enterprise deployments, while the 3650 series provides reliable Layer 2-3 switching suitable for mid-sized network environments. Both series support PoE for powering network devices, but the 3850 delivers greater throughput and more advanced management features. We offer both series in refurbished condition to provide cost-effective solutions for your network infrastructure needs.

The Cisco Catalyst 3850 series represents a newer generation with enhanced capabilities compared to the 3650 series. Both are enterprise-class switches supporting PoE (Power over Ethernet), but the 3850 offers improved performance and advanced features for modern network environments. We offer both series in refurbished condition, allowing you to choose based on your specific network requirements and budget. Contact us today to discuss which platform best fits your infrastructure needs.

The Cisco Catalyst 3560-CX is a 12-port Gigabit Ethernet switch featuring 10/100/1000Base-T connectivity plus 2 SFP slots for optical fiber support. This Layer 3 managed switch is designed as a fixed-configuration, enterprise-class access-layer solution suitable for small enterprise LAN access and branch-office environments, with support for both twisted pair and optical fiber connections.

The Cisco Catalyst 2960L is a 24-port Gigabit Ethernet switch with Power over Ethernet (PoE) support and four 1GB SFP uplink slots for fiber connectivity. This fixed-configuration switch delivers Layer 2 switching with intelligent services, advanced QoS, and integrated security features designed for midmarket and branch office networks. We offer this refurbished model with a Lifetime Limited Warranty, making it an economical choice for organizations looking to expand their network infrastructure.

The Cisco Catalyst 3850 Series offers three feature set levels: LAN Base, IP Base, and IP Services, each providing increasing levels of functionality and capabilities. LAN Base is ideal for basic switching needs, IP Base adds enhanced IP routing features, and IP Services provides comprehensive security and advanced networking capabilities. We offer models across all three feature sets to match your specific network requirements.

The Cisco WS-C2960X-48TSL-RF is a 48-port Gigabit Ethernet switch with 4 SFP (1GB) slots for uplink connectivity. It supports Layer 2 switching with intelligent services, offers both 10/100/1000Base-T and 1000Base-X connectivity, and is rack-mountable for enterprise network deployments. This refurbished model comes with Cisco's Lifetime Limited Warranty and is ideal for midmarket and branch office networks requiring high port density.

The Cisco WS-C6513-E is a 13-slot chassis that occupies 19 rack units (19RU) in a standard 19-inch rack. This enterprise-grade switch is designed for high-density deployments in data center and core network environments where space efficiency and modularity are critical.

The Cisco WS-C6513-E-FAN-RF is a fan tray accessory designed for the Cisco Catalyst 6513-E switch. This remanufactured component provides critical cooling for high-performance network environments where thermal management is essential. We offer this part as a cost-effective replacement or spare component for existing Catalyst 6513-E deployments.

The Cisco C-SM-16P4M2X is a 22-port Catalyst L2 switch module featuring a UADP ASIC, designed for high-performance network switching in enterprise environments. This module is ideal for organizations requiring advanced Layer 2 switching capabilities with enhanced packet processing and dynamic buffer management. We offer this module as part of our comprehensive Cisco networking solutions portfolio—contact us today for availability and integration support.

The Cisco UCS-PSU-6536-AC is a 1100W AC power supply unit designed for the UCS 6536 Fabric Interconnect. This PSU provides reliable power delivery with port-side exhaust configuration, making it suitable for high-density data center environments. We offer this unit as a replacement or additional power supply component for your Cisco UCS infrastructure.

The Cisco UCSX-X10C-GPUFM GPU Front Mezz module is designed to work with Cisco UCS X-Series compute nodes that support Intel Xeon processors, including Xeon Bronze, Silver, Gold, and Platinum variants. This GPU front mezzanine card enables high-performance computing workloads on compatible X-Series platforms. Contact us today for specific processor compatibility details for your deployment.

The Cisco C-SM-NIM-ADPT is a Catalyst SM to NIM Module Adapter that enables compatibility between Cisco Catalyst switch modules and network interface modules. This adapter is essential for expanding network connectivity options on compatible Cisco routing and switching platforms. We offer this adapter as part of our comprehensive Cisco networking accessories catalog.

The Cisco UCSC-HSHP-240M6 is a heatsink designed for 2U SFF (small form factor) M6 PCIe servers. This spare part is engineered to provide efficient thermal management for Cisco UCS C-series servers in dense rack environments. We offer this component as part of our comprehensive Cisco server parts inventory to help maintain optimal system performance.

The Cisco CP-8811-3PCC-K9-RF is a multi-platform IP phone designed for desk and desktop environments with support for VoIP communications. This model features RF (refurbished) condition and is compatible with Cisco Unified Communications Manager, making it suitable for enterprise telecommunications deployments. We offer this Cisco desk phone as part of our comprehensive telecommunications product lineup available from barcodesinc.com.

The Fargo HDP5600 delivers 300 dpi (11.8 dots/mm) continuous tone printing with support for up to 16.7 million colors and 256 shades per pixel. This resolution ensures superior text and image quality for high-definition ID cards and multi-function smart cards suitable for government agencies, universities, corporations, and healthcare facilities.

The Epson LQ-590 uses the Epson S015337 ribbon, which is packaged 10 per box. This ribbon cartridge has a 5 million character lifespan, reducing the need for frequent ribbon changes and ensuring the lowest cost per page. We offer these ribbons in stock and ready to ship from our warehouse.

The FS80 is purpose-built for track-and-trace applications in industries requiring high-speed, precision scanning and reliable performance in demanding environments. Its ability to read barcodes on fast-moving objects makes it ideal for logistics, warehousing, manufacturing, and distribution operations where throughput and accuracy are critical. The scanner's configurable field of view and depth of field options allow deployment across diverse operational scenarios.

Yes, the Cisco Catalyst 9166I AP is fully supported by Cisco Catalyst 9800 Series Wireless Controllers in both physical and virtual deployments. The access point runs Cisco IOS XE Software Release 17.9.2/17.10.1 or later, ensuring seamless integration with your existing Catalyst infrastructure.

Yes, the Cisco CW9166I-B is engineered for both indoor and outdoor deployment, making it ideal for warehouse, distribution center, and logistics facility coverage. Its tri-band 4x4 configuration ensures reliable connectivity across large areas with high device density. Visit barcodesinc.com or contact our team to configure a complete wireless solution for your facility.

Yes, the Cisco Catalyst 9162I-MR is fully compatible with Cisco Catalyst 9800 Series Wireless Controllers, available in both physical and virtual deployments. The access point runs Cisco IOS XE Software Release 17.9.2/17.10.1 or later, ensuring seamless integration with your existing Cisco wireless infrastructure.

Yes, the CW9164I-MR variant is specifically designed as a cloud-managed access point using Meraki Dashboard, providing centralized management and visibility across your wireless network. This makes it ideal for distributed warehouse and logistics operations that need remote monitoring and configuration capabilities.

Yes, the Cisco Catalyst 9164I is designed for both indoor and outdoor deployments, making it ideal for warehouse and logistics facilities. The access point operates reliably in temperatures ranging from 32° to 122°F (0° to 50°C) with humidity tolerance of 10% to 90% non-condensing, ensuring consistent performance in demanding warehouse conditions. Visit barcodesinc.com to explore our full range of wireless solutions optimized for logistics environments.

The WAP571-A-K9-RF includes comprehensive security features including WPA2 and WPA certification, IEEE 802.11i compliance, and hardware-assisted Advanced Encryption Standard (AES) encryption that provides high security without performance degradation. It also supports multiple EAP authentication methods including EAP-TLS, PEAP, and EAP-FAST for enterprise-level access control. Contact us today to discuss your specific security requirements.

The Cisco WAP150-A-K9-NA-RF supports up to 64 active WLAN clients, making it suitable for small to medium-sized office environments, retail locations, and warehouse operations. The access point also supports multiple SSIDs—up to 4 separate virtual networks with independent wireless profiles—allowing you to segment traffic for different departments or guest access. Contact us today to discuss capacity planning for your deployment.

Yes, the Cisco UCS-NVMEM6-W1600 is engineered specifically for Cisco UCS server and compute node deployments. The U.2 form factor and NVMe interface ensure seamless integration with compatible UCS platforms. Contact us today to verify compatibility with your specific server configuration.

The Cisco UCSX-410C-M7 supports up to 16 TB of DDR5 SDRAM across 64 total memory slots, using DDR5-5600/PC5-44800 specifications. This substantial memory capacity makes it ideal for memory-intensive applications, virtualization, and large-scale data processing workloads. Contact us today to discuss memory configurations that match your specific performance requirements.

Yes, the CP-8811-3PWNAK9-RF is designed as a multi-platform Cisco IP phone that integrates with Cisco Unified Communications Manager environments. Its compatibility with standard VoIP infrastructure makes it suitable for organizations already running Cisco telephony systems. Contact us today to verify compatibility with your specific system configuration.

Yes, the UCS-NVMEI4-I3840 is designed for integration within Cisco's UCS server ecosystem, supporting seamless deployment in existing infrastructure. The U.2 2.5-inch form factor ensures compatibility with UCS servers equipped with appropriate NVMe slots. Contact us today to verify compatibility with your specific UCS configuration.

The Cisco UCSX-X10C-PT4F supports up to 8 TB of DDR5 SDRAM with 32 total memory slots, delivering exceptional capacity for memory-intensive workloads such as large-scale data analytics, virtualization, and in-memory databases. The DDR5 technology provides improved bandwidth and efficiency compared to previous generations. Contact us today to configure the exact memory specification needed for your warehouse or logistics operations.

The Cisco UCSX-X10C-RAIDF supports up to 8 TB of DDR5 SDRAM with 32 total memory slots, providing substantial capacity for memory-intensive applications and virtualization workloads. This high memory capacity makes it ideal for enterprise data center environments requiring significant RAM resources. Contact us today to configure the exact memory specifications for your needs.

Yes, the Cisco CP-8841-3PWNAK9-RF is compatible with Cisco Unified Communications Manager systems, supporting enterprise-grade VoIP deployments. This multi-platform capability ensures seamless integration with existing Cisco telephony infrastructure in warehouse and logistics operations. Contact us today for compatibility verification with your specific Unified Communications setup.

Yes, the Catalyst 2960L is well-suited for warehouse and logistics environments where reliable network connectivity and device power delivery are critical. The PoE capability allows you to power IP cameras, access points, and mobile devices directly from the switch, while the 24 Gigabit ports provide sufficient bandwidth for barcode scanners, mobile computers, and RFID readers. Its advanced QoS and security features ensure prioritized traffic for mission-critical AIDC applications.

Yes, the Cisco WS-C3560CX12PDS-RF includes IEEE 802.3af and Cisco prestandard Power over Ethernet (PoE) capability, which eliminates the need for separate wall power when deploying Cisco IP phones, Cisco Aironet wireless LAN access points, or any IEEE 802.3af-compliant end devices. This PoE functionality significantly reduces total cost of ownership and simplifies installation in environments requiring networked devices like IP telephony, wireless access, and video surveillance systems. Contact us today to discuss your PoE deployment requirements.

Yes, the Catalyst 3650 series is ideal for warehouse and logistics environments requiring reliable, manageable network switching. Its full PoE support enables powering access points and IP cameras throughout your facility, while the 48-port configuration provides extensive connectivity for barcode scanners, mobile computers, and other AIDC devices. The rack-mountable design fits standard network cabinet installations common in distribution centers and warehouses.

The WS-C3850-48U-L model features 48 10/100/1000 Ethernet ports with Universal PoE (UPOE) support, which provides enhanced power delivery capabilities. This makes it suitable for powering high-demand devices like wireless access points and IP cameras. Contact us today to confirm the exact power specifications and compatibility with your infrastructure.

Yes, the Cisco Catalyst 3650 24-port models with PoE capability are specifically designed to power and manage wireless access points and other PoE-enabled devices. The switch provides integrated power delivery across its ports, eliminating the need for separate power supplies for compatible access points. This makes it an ideal choice for warehouse and logistics environments deploying wireless infrastructure. Visit barcodesinc.com to explore our available Catalyst 3650 PoE configurations.

The 2960X-48LPS-L includes Power over Ethernet (PoE) ports and supports Layer 2 switching, making it suitable for deployments requiring powered access points or IP phones. The 2960X-48FPS-L is a fixed-power model without PoE capability but offers similar 48-port Gigabit connectivity and 4 SFP slots. Both are available from us as refurbished units and support the same Layer 2 architecture with 4 SFP uplink slots.

Yes, Cisco IP phones in the 8851 series are compatible with Cisco Unified Communications Manager and support both SCCP (Skinny Client Control Protocol) and SIP signaling protocols. This ensures seamless integration with your existing Cisco telecommunications infrastructure. Contact us today to verify specific compatibility with your system version.

Yes, Cisco Catalyst switches like the 3650 and 3850 series are well-suited for warehouse and logistics environments where reliable network connectivity is critical for barcode scanning, mobile computers, and inventory management systems. These managed switches provide Layer 2-3 switching capabilities, PoE support for wireless access points, and rack-mountable designs that fit standard data center installations. We offer refurbished models that deliver enterprise-grade performance at reduced costs, making them ideal for logistics operations managing AIDC infrastructure. Contact us today to discuss which switch configuration best matches your warehouse network requirements.

Yes, the Cisco Catalyst 3560 Series includes IEEE 802.3af and Cisco prestandard Power over Ethernet capability, allowing you to power devices such as IP phones, wireless access points, and video surveillance equipment directly through the network cable. This PoE support reduces installation costs and simplifies deployment of networked devices.

Yes, the WS-C6513-E is well-suited for warehouse and logistics operations that require robust, scalable Ethernet switching. Its 13-slot modular design allows you to configure it with multiple line cards for extensive port density, supporting the high-traffic demands of RFID systems, barcode scanners, and mobile computer networks across large facilities.

The Cisco WS-C6513-E-FAN-RF operates reliably in ambient temperatures ranging from 32° to 104°F (0° to 40°C) with relative humidity between 10% to 90% noncondensing. These specifications ensure stable performance in standard data center and network closet environments. For storage, the unit can withstand temperatures from -40° to 158°F (-40° to 70°C).

The Cisco C-SM-16P4M2X provides 22 total ports with 16 Gigabit Ethernet ports and 4 additional ports, delivering flexible connectivity for medium to large-scale network deployments. The module supports 1G Gigabit Ethernet connectivity across its primary ports, making it suitable for high-bandwidth warehouse and logistics network infrastructure. Visit barcodesinc.com or contact us today for detailed port configuration specifications.

Yes, the UCS-PSU-6536-AC supports redundant N+1 power supply configurations in the Cisco UCS 6536 chassis. Multiple PSUs of equal wattage can be installed to provide failover protection, ensuring continuous operation even if one power supply fails. Contact us today to discuss redundancy requirements for your deployment.

Yes, the Cisco UCSX-X10C-GPUFM is compatible with UCS X-Series compute nodes that support DDR5 SDRAM memory at speeds up to DDR5-5600/PC5-44800. These systems can accommodate up to 8 TB of maximum RAM across 32 memory slots, providing substantial memory capacity for GPU-accelerated applications. Visit barcodesinc.com for detailed compatibility specifications.

The C-SM-NIM-ADPT is specifically designed to work with Cisco Catalyst platforms that support SM (Switch Module) to NIM (Network Interface Module) adaptation. Compatibility depends on your specific Catalyst model and its slot configuration. Contact us today to verify compatibility with your exact equipment—our team can help ensure proper integration with your network infrastructure.

The UCSC-HSHP-240M6 heatsink is compatible with Cisco's M6-generation 2U rack-mountable servers, including models like the UCSC-C240-M6L and UCSC-C240-M6SX that support dual processors and high-density memory configurations. This heatsink is specifically designed for the compact PCIe slot layout found in M6 generation systems. Contact us today for compatibility verification with your specific server model.

The Cisco CP-8811-3PCC-K9-RF is designed as a corded desk phone with network connectivity via RJ-45 ports and Power over Ethernet (PoE) support, making it suitable for wired office deployments. While this model focuses on stable, corded connectivity rather than wireless capability, we also offer other Cisco phone models with Wi-Fi and Bluetooth options if wireless functionality is required. Contact us today to discuss which Cisco telecommunications solution best fits your deployment needs.

The Fargo HDP5600 supports multiple encoding technologies including 125 kHz HID Prox readers, 13.56 MHz contactless encoders (iCLASS, MIFARE, ISO 14443 A/B, ISO 15693), and contact smart card encoders compatible with ISO7816 standards. We offer models with Omnikey Cardman 5121 and 5125 smart card encoders to meet your specific security and identification requirements.

The Epson LQ-590 delivers ultra-fast print speeds of up to 550 characters per second in draft mode at 10 cpi, and supports multiple barcode formats including Code 128, Code 39, EAN-13, EAN-8, Interleaved 2 of 5, POSTNET, UPC-A, and UPC-E. This makes it ideal for high-volume printing of tickets, purchase orders, invoices, and labels in warehouse and logistics environments.

The FS80 is managed through Aurora Focus™ software (version 9.0 or newer), which provides easy configuration, monitoring, and deployment capabilities without requiring multiple conventional scanners. The software allows you to manage single-camera and multi-camera configurations from a centralized interface. Contact us today to learn about future software updates that will expand communication protocols including Ethernet/IP, Modbus, and Profinet support.

The CW9166I-MR is the cloud-managed version of the Cisco Catalyst 9166 Series that uses Meraki Dashboard for centralized management and monitoring. This variant provides simplified deployment and management compared to traditional Catalyst models that require dedicated wireless controllers.

The CW9162I-MR is the cloud-managed version of the Cisco Catalyst 9162 Series that uses Meraki Dashboard for centralized management, offering simplified deployment and monitoring compared to the standard CW9162I model. This makes it ideal for organizations seeking cloud-based wireless management without on-premises controller hardware.

The Cisco CW9166I-B is available in multiple regulatory domain variants (indicated by the -B designation) to ensure compliance in your specific country or region. Customers are responsible for verifying approval for use in their individual countries through Cisco's compliance portal. Our team can help you select the correct regulatory domain variant for your deployment location.

The Cisco Catalyst 9164I AP is supported by Cisco Catalyst 9800 Series Wireless Controllers, available in both physical and virtual deployments. This gives you flexibility in how you manage your wireless infrastructure, whether you prefer on-premises or cloud-based controller options.

The Cisco Catalyst 9164I represents the latest generation of Cisco access points with Wi-Fi 6E tri-band 4x4 MIMO capability, offering significantly improved throughput and capacity compared to earlier 802.11n and 802.11ac models. The enhanced antenna design and modern wireless standards provide better coverage and performance for high-density deployments common in large warehouses and distribution centers. Contact us today for a detailed comparison and to determine which model best fits your infrastructure needs.

Yes, the WAP571-A-K9-RF features variable transmit power settings that allow access point coverage to be tuned for different requirements, with low output power settings supporting closer spacing of access points in high-density environments. The external antennas support 2T3R MIMO with 3 antenna ports, providing omnidirectional coverage suitable for offices and similar RF environments. Visit barcodesinc.com to learn more about deploying this access point in your facility.

The WAP150-A-K9-NA-RF includes comprehensive WLAN security with WPA/WPA2 (both personal and enterprise modes), 802.1X authentication, AES and TKIP encryption, Wi-Fi Protected Setup (WPS), and wireless client isolation capabilities. These features ensure that your warehouse or logistics network maintains enterprise-grade security standards while protecting sensitive data transmission. Available from us with full technical support for security configuration and compliance.

The Cisco CP-8811-3PWNAK9-RF supports both wired and wireless connectivity, making it flexible for various office layouts and deployment scenarios. The device includes network connectivity options and operates on VoIP protocols standard to Cisco IP phones. Visit barcodesinc.com or contact our team for detailed specifications on all available connectivity features.

Cisco UCSX servers feature multiple storage interfaces including 6 2.5" drive bays, 2 M.2 interfaces, and support for Serial ATA RAID and Serial Attached SCSI (SAS) controllers with NVMe capability. This multi-interface approach provides flexibility for both traditional and high-speed storage deployments. Visit barcodesinc.com to explore storage expansion options and compatible drive configurations.

This server features Serial ATA RAID support, Serial Attached SCSI (SAS) controllers, and NVMe capabilities, with 6 2.5-inch drive bays and 2 M.2 interfaces for flexible storage configurations. These multiple storage options allow you to balance performance, capacity, and redundancy for mission-critical applications. Visit barcodesinc.com to explore storage configurations that match your data center requirements.

The Cisco UCS-NVMEM6-W1600 is ideal for enterprise data centers, high-performance computing clusters, and virtualized environments requiring fast storage I/O and large capacity. Its 1.6TB capacity and WD SN840 performance characteristics make it suitable for database servers, analytics workloads, and mission-critical applications. Visit barcodesinc.com to explore our full range of Cisco server storage solutions.

The Intel P5500 NVMe drive in the UCS-NVMEI4-I3840 is engineered for high-performance enterprise applications, offering fast sequential and random I/O operations. This drive is optimized for data-intensive workloads including databases, analytics, and virtual machine hosting. Visit barcodesinc.com to explore our full range of high-performance server storage solutions.

The Cisco UCSX-X10C-RAIDF features Serial ATA RAID and Serial Attached SCSI (SAS) controller support, providing flexible storage connectivity and redundancy options for enterprise deployments. The system also supports NVMe controllers for high-speed boot and cache applications. Visit barcodesinc.com to explore RAID configuration options that match your storage requirements.

The Cisco CP-8841-3PWNAK9-RF features network connectivity through RJ-45 ports and supports Power over Ethernet (PoE) for simplified installation. This wired connectivity approach eliminates the need for separate power supplies in most deployments, reducing cable clutter in warehouse and office environments. Visit barcodesinc.com for detailed technical specifications on all available connection options.

The Cisco Catalyst 3650 and 3850 series switches feature Power over Ethernet (PoE) on their ports, enabling you to power devices like wireless access points, IP phones, and network cameras directly through the network cable. Models like the WS-C3650-48PQ-L-RF with 48 PoE ports provide extensive power delivery across your network infrastructure. This eliminates the need for separate power supplies for many devices, simplifying installation and reducing cable clutter in warehouse and logistics facilities. Available from us in refurbished condition, these PoE-enabled switches help streamline your network deployment.

The WS-C3560CX12PDS-RF provides 12 Gigabit Ethernet ports (10/100/1000Base-T) for standard twisted pair connections, plus 2 SFP slots supporting 1000Base-X optical fiber connectivity and a 10G uplink for high-speed backbone connections. This combination of copper and fiber options makes it flexible for both access-layer deployments and connections to higher-speed network infrastructure. Visit barcodesinc.com to verify specific port configurations for your network topology.

The Cisco CP-8851 series features dual RJ-45 Ethernet ports for network connectivity—one for LAN connection and another for connecting downstream devices like PCs. The phone supports both wired and wireless connectivity options, making it adaptable to various workplace configurations. PoE (Power over Ethernet) support is available depending on the specific configuration.

This switch provides enterprise-grade intelligent services including advanced Quality of Service (QoS), rate limiting, access control lists (ACLs), multicast management, and high-performance IP routing. These features enable network-wide policy enforcement while maintaining the simplicity of traditional LAN switching for warehouse and logistics environments.

Yes, the Cisco Catalyst 2960X series is well-suited for warehouse and logistics networks due to its robust Layer 2 switching capabilities, advanced QoS for bandwidth optimization, and security features including Network Admission Control (NAC). The switches support multiple connectivity options (Gigabit Ethernet and SFP uplinks) and can be rack-mounted for space-efficient deployment in distribution centers and branch locations. Contact us today to discuss your specific warehouse networking requirements.

The primary difference is port density: the 24-port model provides 24 Gigabit Ethernet ports plus 4 SFP uplink slots, while the 48-port variant doubles the port count to 48 Gigabit Ethernet ports with the same SFP uplink capacity. Choose the 24-port for smaller deployments or the 48-port for larger network environments requiring higher device connectivity. Both models support the same management features and PoE capabilities. Contact us today to determine the right port density for your facility.

The Catalyst 3650-48FQ offers full PoE support with 10 Gigabit Ethernet uplink capability via 10GBase-X, making it suitable for high-bandwidth applications. The 3650-48PS model provides standard PoE with 4 SFP slots for fiber connectivity but operates at 10/100/1000Base-T speeds. Both are 48-port switches, but the FQ variant is better suited for environments requiring greater uplink bandwidth and full power delivery across all ports.

The Catalyst 2960L supports 802.1S/W for standards-based fault tolerance and load balancing, PVST+ (Per VLAN Spanning Tree Plus) for increased bandwidth on redundant links, and Network Admission Control (NAC) for port-based and MAC-based authentication. The switch includes comprehensive security through data encryption technologies, access control lists (ACLs), and granular rate limiting to protect your network edge.

The Cisco Catalyst 3850 Series supports multiple power supply options including 350W AC, 715W AC, 1100W AC, and 440W DC configurations, allowing you to select the appropriate power capacity based on your port density and device requirements. Different models come with different standard power supplies, and we can help you identify the right configuration for your deployment.

Yes, the WS-C6513-E-FAN-RF is specifically designed as a fan accessory for the Cisco Catalyst 6513-E switch. This remanufactured component maintains full compatibility with the original specifications and requirements of your switch. Contact us today to verify compatibility with your specific configuration or to discuss your cooling needs.

The WS-C6513-E-RF model ships without power supplies (no PS), allowing you to select and install appropriate power modules based on your facility's power infrastructure. This flexibility enables configuration with AC or DC power supplies with redundancy options to match your specific operational requirements.

The C-SM-16P4M2X utilizes dynamically shared packet buffering across all ports, allowing intelligent traffic management and reduced packet loss during network congestion. This dynamic buffer allocation ensures optimal performance across varying traffic patterns typical in warehouse management and logistics operations. Our team can help you understand how this buffering technology integrates with your existing network infrastructure—contact us today.

The Cisco UCS-PSU-6536-AC operates reliably in ambient temperatures from 0 to 40°C (32 to 104°F) with relative humidity between 5 to 85% (noncondensing). These specifications ensure stable performance in standard data center environments with proper cooling and ventilation infrastructure.

GPU front mezzanine cards like the UCSX-X10C-GPUFM are used for AI/machine learning inference, high-performance computing, video transcoding, and data analytics workloads that benefit from GPU acceleration. These cards integrate directly into the compute node architecture, reducing latency and improving performance for GPU-intensive applications. We offer these components as part of comprehensive Cisco UCS solutions for enterprise data centers.

The C-SM-NIM-ADPT enables the use of various Cisco NIM modules, including switch network modules like the C-NIM-8T (8-port 1G), C-NIM-8M (8-port 2.5G with PoE), and C-NIM-4X (4-port 10G optical) modules. The adapter provides the mechanical and electrical interface needed to mount these modules into Catalyst SM slots. Visit barcodesinc.com to explore our full selection of compatible NIM modules available from us.

The M6 generation servers use Intel C621A chipsets with DDR4-3200 memory support, while M7 and M8 generations feature newer Intel C741 chipsets with DDR5 memory support for improved performance and bandwidth. M8 servers offer the latest DDR5-6400 memory speeds and 24Gb/s SAS RAID controllers compared to M7's 12Gb/s controllers. Visit barcodesinc.com to compare full specifications across these generations and find the right server for your data center needs.

The Cisco CP-8811 series includes various configurations such as the CP-8811-K9++= (standard), CP-8811-W-K9= (wireless variant), and CP-8811-3PCC-K9-RF (refurbished multi-platform version). The 3PCC designation indicates multi-platform compatibility, while the RF suffix denotes refurbished condition, offering cost-effective options for organizations standardizing on Cisco telecommunications infrastructure. Visit barcodesinc.com to compare all available Cisco 8811 variants and find the right fit for your deployment.

Print speeds vary by ribbon type: 7 seconds per card for single-color resin black, 12 seconds for black with overlay, and 24 seconds for full-color YMCKO printing. For dual-color applications with two resin black panels, the printer delivers 31 seconds per card, making it efficient for high-volume production environments.

The Epson LQ-590 can produce up to six copies plus one original, for a total of seven pages in a single print pass. This 24-pin dot matrix technology is designed for multipart forms printing, making it efficient for manufacturing, point-of-sale, and production environments.

The FS80 features Zebra's Integrated Multifunction Light (ZIML) system, available in Standard and Premium models with multiple light colors including white, red, and infrared. The Premium ZIML model includes a dual laser aimer for accurate camera positioning and a configurable built-in speaker, while both models offer 360-degree status LED indicators. Adjustable lens angles (20, 40, 60, 80 degrees) allow optimization for your specific application requirements.

The Cisco Catalyst 9166I features tri-band 4x4 Wi-Fi 6E capability with advanced MIMO technology, dynamic frequency selection, and support for both 802.11a/g and 802.11n standards. It's designed for enterprise indoor deployments requiring high-density coverage and reliable performance across multiple frequency bands.

The Cisco CW9164I-MR requires Cisco IOS XE Software Release 17.9.2/17.10.1 or later to operate properly. We recommend verifying your controller software version before deployment to ensure full compatibility and access to the latest security and performance features.

The Cisco Catalyst 9164I AP is fully compatible with Cisco Catalyst 9800 Series Wireless Controllers, available in both physical and virtual deployments. The access point supports Cisco IOS XE Software Release 17.9.2/17.10.1 or later, ensuring you have access to the latest security features and performance optimizations. We offer complete controller solutions and can assist with your wireless infrastructure planning—visit barcodesinc.com or contact us today.

The CW9162I-MR is available in multiple regulatory domain variants (designated by the 'x' in CW9162I-x part numbers) to comply with local regulations in different countries. Customers are responsible for verifying approval for their specific country, and Cisco provides a compliance verification tool at cisco.com/go/aironet/compliance to identify the correct regulatory domain.

The Cisco Catalyst 9166I access point is supported by Cisco Catalyst 9800 Series Wireless Controllers in both physical and virtual deployments. It runs Cisco IOS XE Software Release 17.9.2/17.10.1 or later for optimal performance and security. Contact us today to discuss controller options and licensing for your wireless network architecture.

The WAP571-A-K9-RF is designed for operating temperatures between 0 to 40°C (32 to 104°F) with non-operating temperature range of -30 to 70°C (-22 to 158°F), and operating humidity of 5 to 95% non-condensing. These specifications make it suitable for both indoor office environments and controlled outdoor deployments. We have detailed technical documentation available—contact us today for complete environmental compliance details.

The Cisco WAP150-A-K9-NA-RF operates in temperature ranges from 0°C to 40°C (32°F to 104°F) with operating humidity between 10% to 85% noncondensing, making it suitable for standard indoor warehouse and office environments. Storage specifications allow for temperatures from –20°C to 70°C (–4°F to 158°F), providing flexibility for inventory storage. For deployment in extreme temperature or high-humidity environments, contact us today to discuss alternative solutions.

Yes, with dual processor support, up to 8 TB of memory, and comprehensive RAID capabilities, the Cisco UCSX-X10C-PT4F is well-suited for virtualization platforms, cloud infrastructure, and enterprise data center environments. The server's architecture supports Windows Server and Linux operating systems, enabling broad compatibility with virtualization hypervisors. We offer these systems pre-configured for popular virtualization stacks—contact us today for deployment guidance.

The WD SN840 Extreme Performance NVMe drive delivers significantly faster read/write speeds compared to traditional SATA SSDs, reducing latency and improving application responsiveness in server environments. This technology is particularly beneficial for workloads involving large data transfers, virtualization, and real-time analytics. We offer this high-performance storage component to optimize your data center infrastructure.

The Cisco CP-8811-3PWNAK9-RF is designed for flexible deployment in professional environments. While we have detailed product specifications available, we recommend contacting us today to confirm mounting options and installation requirements for your specific workspace needs.

Yes, the Cisco UCSX-TPM2-002B-C servers include a Trusted Platform Module 2.0 and are FIPS 140-2 compliant, meeting federal security standards for encryption and secure boot. This makes them suitable for government, healthcare, and other regulated industries requiring enhanced security certifications. Contact us today if you need servers with specific compliance requirements.

This NVMe drive is ideal for enterprise data centers running virtualization platforms, database servers, and high-speed analytics applications where low-latency storage is critical. It supports demanding workloads in cloud computing, machine learning, and transactional systems. We offer this component to help optimize your data center performance and efficiency.

Yes, the Cisco UCSX-X10C-RAIDF is Intel Optane Memory ready, allowing you to leverage persistent memory technology for enhanced application performance and data durability. This capability is particularly valuable for databases and analytics workloads that benefit from high-speed, non-volatile memory. Contact us today to discuss Optane memory configurations for your deployment.

Yes, the Cisco CP-8841-3PWNAK9-RF is designed for flexible deployment and can be wall-mounted or placed on a desktop, making it ideal for space-constrained warehouse offices and logistics facilities. The included Power Cube 4 provides the flexibility needed for various installation configurations. Our team can help you determine the best mounting solution for your facility.

Yes, the Cisco CP-8851-3PWNAK9-RF supports wall mounting in addition to desktop deployment. The phone includes mounting holes on the base and a removable foot stand, providing flexibility for different installation environments in warehouses, offices, and logistics facilities.

The 2960X series offers multiple connectivity options including 10/100/1000Base-T (Gigabit Ethernet) ports for standard LAN connections and 1000Base-X SFP slots for fiber optic uplinks. The 48-port models feature 48 Gigabit Ethernet ports plus 4 SFP slots, while 24-port configurations provide 24 Gigabit Ethernet ports with the same 4 SFP uplink capability. This flexibility allows seamless integration with both copper and fiber-based network infrastructures.

The Cisco WS-C2960L24PSLL-RF includes four 1GB SFP (Small Form-factor Pluggable) slots that support fiber optic uplinks for long-distance connectivity and backbone connections. These SFP slots allow you to extend your network beyond the 24 Gigabit Ethernet ports and integrate with existing fiber infrastructure in your facility.

Yes, the Cisco Catalyst 3850 Series switches are fully stackable, utilizing the improved Cisco StackWise-480 technology for resilient multi-switch configurations. These switches operate reliably in environments with temperatures ranging from -5°C to +45°C, making them suitable for most data center and enterprise network deployments. Visit barcodesinc.com to explore our complete lineup of stackable Catalyst 3850 models.

Yes, the Catalyst 3650 series supports both twisted pair and optical fiber connectivity through its SFP slots and 10GBase-X ports, depending on the specific model. This flexibility allows you to build hybrid networks combining copper connections for edge devices with fiber optic links for high-speed backbone connectivity between switches and core network equipment. Visit barcodesinc.com to explore available configurations.

Yes, the Catalyst 3560-CX is an ideal access-layer switch for branch-office and distributed environments common in warehouse and logistics operations. Its support for IP telephony, wireless access points, video surveillance, and building management systems makes it well-suited for modern supply chain facilities requiring integrated networking infrastructure.

The Cisco Catalyst 3650 series includes models with 4x10G SFP uplink slots, providing high-speed connectivity to core network infrastructure or data centers. The 48-port models like the WS-C3650-48PQ-L-RF combine extensive access-layer PoE ports with these powerful 10 Gigabit uplinks for aggregating traffic from multiple switches. This architecture supports scalable network designs where you need high port density at the access layer with fast backbone connectivity. We offer these switches refurbished to provide cost-effective solutions for expanding your network capacity.

Yes, the Cisco WS-C3560CX12PDS-RF is designed for flexible deployment options including desktop, rack-mountable, and rail-mountable configurations, making it suitable for various enterprise environments from small offices to branch locations. Its fixed-configuration, enterprise-class design ensures reliable operation across different physical setups while maintaining consistent performance and manageability. We offer this switch ready for deployment in your preferred mounting configuration.

Refurbished Cisco Catalyst switches available from us undergo rigorous testing and come with Cisco's Lifetime Limited Warranty, making them fully reliable for production use in warehouse and logistics operations. Refurbished equipment offers significant cost savings compared to new switches while maintaining enterprise-grade performance and durability. Many organizations successfully deploy refurbished Cisco switches in demanding RFID and barcode scanning environments. Contact us today to learn more about our refurbished switch inventory and warranty coverage.

Remanufactured components like the WS-C6513-E-FAN-RF have been professionally restored to original specifications and performance standards, offering significant cost savings compared to new parts. Both remanufactured and new units provide equivalent functionality and reliability for your network infrastructure. We offer remanufactured accessories to help optimize your IT budget without compromising performance.

Yes, the WS-C6513-E supports multiple redundancy features including supervisor module redundancy, switch fabric redundancy, power supply redundancy, and fan redundancy. These capabilities ensure continuous network operation critical for warehouse management systems, inventory tracking, and supply chain operations.

Yes, the Cisco Catalyst switch modules support optional SFP (Small Form-factor Pluggable) fiber modules, including multimode fiber (up to 500m), single-mode fiber (up to 10km), and extended single-mode fiber (up to 40km) options. This flexibility allows you to extend your network reach beyond standard UTP cabling in large warehouse and distribution center environments. We offer compatible SFP modules and can assist with fiber deployment planning—visit barcodesinc.com for options.

The Cisco UCS 6536 supports mixed AC and DC power supplies in combined or redundant modes, provided the AC input voltage is 220V. All power supplies must be of equal wattage for proper load balancing. Visit barcodesinc.com to explore compatible DC PSU options for your mixed-power configuration.

The UCSX-X10C-GPUFM represents current-generation GPU front mezzanine technology for Cisco's X-Series compute platform, offering improved performance and efficiency compared to earlier UCS generations. The X-Series architecture provides better scalability, faster interconnects, and support for latest DDR5 memory standards. Contact us today to discuss how this GPU module fits your infrastructure upgrade path.

Yes, the C-SM-NIM-ADPT is designed for production use in enterprise network environments and data center applications. As a passive adapter from Cisco, it provides reliable mechanical and electrical connectivity without introducing single points of failure. We recommend consulting with our team to ensure proper installation and configuration for your specific network topology.

Yes, heatsinks like the UCSC-HSHP-240M6 are replaceable spare parts designed for field installation on compatible Cisco UCS servers. Upgrading or replacing heatsinks can help maintain thermal performance in high-density environments or when replacing worn components. We recommend consulting Cisco's documentation or contacting us today to ensure proper installation procedures for your specific server model.

Yes, the Cisco CP-8811-3PCC-K9-RF supports both desktop and wall-mounted installation options, providing flexible deployment in various office environments. This versatility makes it suitable for reception areas, conference rooms, and individual workstations where space optimization is important. We offer this mounting flexibility as part of our complete Cisco desk phone solutions available from barcodesinc.com.

We offer multiple ribbon configurations including full-color YMCKO (250 prints), full-color half-panel YMCKO (350 prints), dual black panel YMCKOK (200 prints), fluorescent options, and monochrome ribbons with yields up to 1,000 prints. Rewrite technology is also available, eliminating the need for ribbons on compatible card types.

The Epson LQ-590 includes both Hi-Speed USB (compatible with USB 2.0 specification) and Parallel interfaces, plus an additional slot for optional Type B interface cards. This ensures compatibility with both modern and legacy printing applications in your warehouse or IT infrastructure.

The FS80 is equipped with Intel Atom multi-core processors designed to deliver faster barcode decoding and support both single-camera and multi-camera configurations simultaneously. This processing capability enables the scanner to handle high-speed scanning environments while maintaining accuracy and reducing the need for multiple separate scanning devices. The platform also supports Deep Learning OCR functionality for enhanced data recognition.

Yes, we offer the CW9166I-MR specifically configured with Meraki cloud-managed capabilities, allowing you to manage your wireless network through the Meraki Dashboard. Contact us today to discuss your cloud management requirements and deployment options.

The CW9162I-MR features 2x2 MIMO with two spatial streams and Maximal Ratio Combining (MRC) technology to enhance signal reception and coverage quality across your wireless network. These advanced antenna techniques help improve reliability and throughput in challenging RF environments.

The WAP571-A-K9-RF supports multiple management protocols including Telnet, SNMP v3, command-line interface, and HTTP management for comprehensive network oversight. It includes support for RADIUS and TACACS+ authentication, VLAN support, and quality-of-service (QoS) features such as weighted fair queuing and class-based QoS for traffic prioritization. Available from us with full technical support for implementation.

While the standard CW9166I-B model works with traditional Cisco Catalyst controllers, Cisco also offers cloud-managed variants using Meraki Dashboard for organizations preferring cloud-based management. This flexibility allows you to choose between on-premises or cloud management based on your IT infrastructure preferences. Visit barcodesinc.com to explore both deployment options available from us.

The Cisco Catalyst 9164I meets major international compliance standards including UL (UL 60950), CSA (CSA 22.2), CE mark, and FCC Part 15 (CFR 47) Class A/B certifications. These certifications ensure the access point meets safety and electromagnetic compatibility requirements for deployment across North America, Europe, and other regulated markets. We can verify regulatory domain approvals for your specific country—contact us today for compliance documentation.

Yes, Cisco maintains a compliance portal where you can verify approval and identify the correct regulatory domain for your country at https://www.cisco.com/go/aironet/compliance. As a customer, you are responsible for verifying that the access point meets regulatory requirements for your specific location before deployment.

Yes, the Cisco WAP150-A-K9-NA-RF supports SSID-to-VLAN mapping with wireless client isolation, allowing you to segregate network traffic by department or function without requiring multiple physical access points. It also includes WMM (Wireless Multimedia with QoS per 802.11e) and U-APSD power save features, enabling prioritization of critical applications like voice and video. These capabilities are essential for logistics operations requiring real-time data transmission and device management.

The Cisco UCSX-X10C-PT4F includes Gigabit Ethernet connectivity with multiple RJ-45 ports for reliable network communication in high-bandwidth environments. The server supports 24Gb/s SAS connectivity for storage networking, ensuring fast data transfer between compute and storage layers. We can provision these servers with additional network interface options to meet your specific connectivity and redundancy requirements.

The 2.5-inch U.2 form factor provides a standardized interface that enables hot-swappable storage in enterprise servers, reducing downtime during maintenance and upgrades. This design allows for higher storage density compared to 2.5-inch SATA drives while maintaining compatibility with existing server architectures. Our team can help you integrate this storage solution into your infrastructure strategy.

The Cisco CP-8811-3PWNAK9-RF comes with a power cube included in the package, simplifying deployment and reducing additional procurement needs. The power supply is integrated into the standard package we offer. For detailed power specifications and electrical requirements, visit barcodesinc.com or contact our team.

The Cisco UCSX-210C-M8-U supports multiple operating systems including Windows Server 2022 Standard and Datacenter editions, Windows Server 2019 Standard and Datacenter editions, and Red Hat Enterprise Linux. This broad OS compatibility allows you to deploy the server in diverse IT environments and legacy system integrations. We can help you identify the right OS licensing and deployment options for your infrastructure.

Cisco UCS server components, including the UCS-NVMEM6-W1600, typically include a 3-year warranty covering hardware defects and failures. Our team at Barcodes Inc can provide detailed warranty information and support options for your purchase. Contact us today for complete coverage details and enterprise support options.

The Cisco UCSX-X10C-RAIDF provides multiple 2.5-inch drive bays and M.2 interfaces for flexible storage configurations, supporting both SAS and NVMe drives depending on your model variant. This multi-interface approach enables you to mix storage types for optimal performance and cost efficiency. We offer these servers with various storage configurations—visit barcodesinc.com for specific bay counts and interface details.

The Cisco CP-8841-3PWNAK9-RF is positioned as a multi-platform desk phone with the included Power Cube 4, offering a cost-effective solution compared to higher-end models like the 8875NR that feature Wi-Fi, Bluetooth, and larger LCD displays. The 8841 model focuses on essential VoIP functionality for standard business communications in warehouses and logistics operations. Contact us today to compare specific models and find the right fit for your organization's needs.

The Cisco WS-C3560CX12PDS-RF supports advanced Layer 3 switching capabilities including high-performance IP routing, rate limiting, access control lists (ACLs), multicast management, and quality of service (QoS) features. These intelligent services enable organizations to deploy sophisticated network policies and applications such as IP telephony, wireless access, video surveillance, and building management systems while maintaining traditional LAN switching simplicity. Contact us today for assistance with configuring these advanced features for your network.

The WS-C3560CX12TCS-RF supports multiple mounting configurations including desktop, rack-mountable, and rail-mountable options, providing flexibility for various warehouse and IT infrastructure setups. This versatility allows you to deploy the switch in your preferred environment without requiring additional mounting hardware.

The Cisco Catalyst 3850 supports comprehensive management through SNMP v1, v2c, and v3 protocols, command-line interface (CLI), and web-based management interfaces, giving you flexible options for network administration and monitoring. These management tools enable you to configure policies, monitor performance, and maintain security across your wired and wireless infrastructure.

The Catalyst 3650 includes 4 SFP (Small Form-factor Pluggable) slots that support both Gigabit and 10 Gigabit Ethernet connectivity, providing flexible uplink options to your core network. These SFP slots allow you to use either copper or fiber optic connections depending on your infrastructure requirements and distance needs. This modular approach ensures the switch can adapt to various network topologies in warehouse and distribution environments. Visit barcodesinc.com to explore compatible SFP modules and uplink configurations.

Yes, the refurbished Cisco Catalyst switches we offer come with Cisco's Lifetime Limited Warranty and have been professionally tested to ensure they meet original specifications and performance standards. Refurbished equipment provides the same reliability as new hardware at significantly lower cost, making it an excellent choice for warehouse managers and IT procurement teams managing network infrastructure budgets. Our refurbished switches have been restored to like-new condition and are suitable for mission-critical logistics and inventory management applications. Contact us today to learn more about our refurbished Cisco switch inventory and warranty coverage.

Yes, we offer Cisco Catalyst 2960X switches as proven enterprise-grade solutions with advanced security, QoS, and resiliency features for network edge deployments. These switches support standards-based fault tolerance (802.1S/W), rapid recovery with sub-100-millisecond convergence via Flexlink, and granular access control lists (ACLs) for network security. As refurbished units with Lifetime Limited Warranty, they provide cost-effective options for IT teams building or expanding enterprise networks. Visit barcodesinc.com to explore our available configurations.

The CP-8851 series offers a balance of features and affordability compared to higher-end models like the CP-8875NR. While the 8851 provides essential multi-platform IP phone functionality with corded/cordless capability, models like the 8875 add advanced features such as Wi-Fi, Bluetooth, and larger LCD displays. Visit barcodesinc.com to compare specifications and find the right model for your organization's needs.

The Catalyst 2960L is a 1U rack-mountable switch designed for standard 19-inch equipment racks, making it suitable for data centers and network closets in warehouses and distribution centers. The switch features AC power supply with external power supply failure protection, ensuring continuous operation even during power supply redundancy scenarios.

All refurbished Cisco Catalyst switches available from us include a lifetime limited warranty, ensuring long-term reliability and protection for your network infrastructure investment. Our refurbished equipment undergoes rigorous testing and restoration to meet manufacturer specifications, providing enterprise-grade performance at reduced cost. Contact us today for detailed information about warranty coverage and technical support options.

The WS-C6513-E supports various Ethernet speeds through its modular line card architecture, including 10/100/1000 Mbps and higher-speed options. This flexibility allows integration with diverse network devices including barcode scanners, label printers, mobile computers, and RFID readers operating at different speeds.

The Cisco WS-C6513-E-FAN-RF is rated for operating altitudes up to 6,500 feet (2,000 meters), with agency certification up to this level. This makes it suitable for most standard data center installations at typical elevation levels. For deployments at higher altitudes or in specialized environments, contact us today to discuss your specific requirements.

The Cisco C-SM-16P4M2X is engineered for reliable operation in standard data center and network closet environments with a compact form factor optimized for modular deployment. While specific dimensions vary by configuration, Cisco's switch modules are designed to integrate seamlessly into existing infrastructure with minimal space requirements. Contact us today for detailed environmental specifications and installation requirements for your facility.

The Cisco UCS-PSU-6536-AC meets international safety standards including UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, and IEC 60950-1. It also complies with EMC emissions and immunity requirements across multiple regulatory domains including FCC Part 15 Class A and CISPR 32 Class A.

Cisco UCS X-Series compute nodes compatible with the UCSX-X10C-GPUFM support multiple storage options including 2.5-inch SAS/SATA drives, NVMe M.2 interfaces, and RAID controllers for data protection. Systems can be configured with up to 6 drive bays and 2 M.2 slots depending on the specific compute node model. We can help you design the optimal storage configuration for your GPU-accelerated workloads.

NIM modules are designed to install directly into NIM slots on compatible Cisco platforms, while the C-SM-NIM-ADPT allows NIM modules to be used in SM (Switch Module) slots on Catalyst switches. The adapter provides the necessary physical and electrical translation between the two slot types without affecting module functionality or performance. Contact us today if you need guidance on which approach is best for your network architecture.

Cisco C240-M6 servers support Intel Xeon processors including Bronze, Silver, Gold, and Platinum SKUs with the C621A chipset. Newer M7 and M8 generations continue this broad processor support with the C741 chipset, allowing flexibility in performance tiers for different workloads. Available from us are complete server configurations with pre-selected processor options or bare systems for custom builds.

The Cisco CP-8811-3PCC-K9-RF features dual RJ-45 network ports with Power over Ethernet (PoE) support, enabling simplified deployment without requiring separate power supplies. This corded connectivity design ensures stable, uninterrupted VoIP communications in enterprise environments using Cisco Unified Communications Manager. Contact us today to learn how we can integrate this phone into your existing telecommunications infrastructure.

The Fargo HDP5600 accepts standard CR-80 cards (3.375˝L x 2.125˝W) and CR-79 adhesive back cards (3.313˝L x 2.063˝W), with card thickness compatibility from 0.009˝ to 0.040˝ (9 mil to 40 mil). The printer accommodates PVC or polyester cards with polished PVC finish, with monochrome resin required for 100% polyester cards.

The Epson LQ-590 has a mean time between failures (MTBF) rating of 25,000 power-on hours and a 400 million character print head life. This extreme reliability in demanding print environments facilitates greater productivity with less downtime, backed by a three-year warranty.

The FS80 currently supports USB connectivity and industrial protocols for integration into warehouse management and production systems. Future software updates will expand communication capabilities to include Ethernet/IP, Modbus, and Profinet protocols, along with JavaScript support and Leader & Follower network functionality. Visit barcodesinc.com or contact us today to discuss your specific connectivity requirements and available integration options.

The CW9166I-MR is available in multiple regulatory domain variants to comply with local wireless regulations across different countries. Cisco maintains an updated list of approved regulatory domains and part numbers on their compliance page, and we can help you identify the correct configuration for your specific region—contact us today for details.

Yes, the WAP571-A-K9-RF's dual-radio design, variable transmit power settings, and robust signal propagation make it well-suited for warehouse and logistics applications requiring reliable wireless coverage across large areas. The hardware-assisted AES encryption and WPA2 certification ensure secure data transmission for inventory and tracking operations. Contact us today to discuss how this access point can support your warehouse connectivity needs.

The Cisco CW9166I-B includes antenna support optimized for its tri-band 4x4 configuration to maximize coverage and performance in warehouse and logistics environments. The access point is designed with professional-grade antenna systems suitable for both indoor and outdoor installations. Contact our team for detailed antenna specifications and site survey recommendations for your specific deployment area.

The tri-band 4x4 MIMO architecture of the Cisco Catalyst 9164I enables superior capacity and coverage in high-density environments like large warehouses and distribution centers where multiple devices require simultaneous connectivity. The Wi-Fi 6E standard provides improved spectral efficiency and reduced latency, critical for real-time barcode scanning and mobile inventory management operations. Available from us with full technical support—contact us today to discuss your warehouse wireless requirements.

We offer the Cisco Catalyst 9162I-MR access point with full technical support and deployment expertise. Contact us today at barcodesinc.com or reach out to our team to discuss your wireless infrastructure needs and get pricing for your deployment.

Cisco offers optional wireless and mobility services to enhance your CW9164I-MR deployment. For detailed information on available service options and licensing, contact us today or visit barcodesinc.com — our team can help you select the right support and service packages for your warehouse and logistics operations.

The Cisco WAP150-A-K9-NA-RF supports Wireless Distribution System (WDS), which allows wireless signals to be repeated by up to 4 compatible repeaters, enabling you to extend coverage across larger warehouse or facility areas without running additional Ethernet cabling. This is particularly valuable for multi-building logistics operations or facilities with challenging RF propagation. Visit barcodesinc.com or contact us today for guidance on designing a WDS deployment that meets your coverage requirements.

The Cisco UCSX-X10C-PT4F supports Windows Server 2022 (Standard and Datacenter editions), Windows Server 2019 (Standard and Datacenter editions), and Red Hat Enterprise Linux, providing broad compatibility with enterprise operating systems and workloads. This multi-OS support ensures you can deploy the server in diverse IT environments without compatibility concerns. Contact us today to discuss the optimal operating system configuration for your infrastructure.

The Intel P5500 NVMe drive is built for enterprise-grade reliability with extended endurance ratings suitable for 24/7 data center operations. It meets stringent reliability standards for temperature stability and power consistency in controlled data center environments. Contact us today for detailed environmental specifications and warranty information for your deployment.

The Cisco CP-8811-3PWNAK9-RF is primarily designed as a desk phone for professional office and corporate environments rather than industrial warehouse settings. For logistics and warehouse communication solutions, we offer specialized mobile computers and rugged devices better suited to those demanding environments. Contact us today to discuss the right telecommunications solution for your operational needs.

The Cisco UCS-NVMEM6-W1600 can be integrated into compatible UCS server platforms that support U.2 NVMe form factor drives. Before upgrading, verify your server model's storage specifications and available drive bays. Contact us today—our team can help you determine compatibility and provide guidance on integrating this drive into your existing infrastructure.

Both the M7 and M8 models support dual processors and up to 8 TB of DDR5 SDRAM with 32 memory slots, but the M8 generation includes Intel Optane Memory support for enhanced caching performance. The M7 features an Intel C741 chipset with 6 2.5" bays and 2 M.2 interfaces, while both models support Xeon processor families. Available from us, both servers deliver enterprise-class performance with different optimization paths for your workload.

The Cisco UCSX-X10C-RAIDF supports Windows Server 2022 and 2019 editions, as well as Red Hat Enterprise Linux and SUSE Linux Enterprise, providing flexibility across enterprise operating system environments. This broad OS support ensures compatibility with your existing infrastructure and applications. Contact us today to verify specific OS support for your deployment requirements.

The Cisco CP-8841-3PWNAK9-RF is well-suited for warehouse managers and logistics teams who need reliable desk phone communications integrated with Cisco Unified Communications systems. Its multi-platform support and straightforward VoIP functionality make it ideal for office environments within distribution centers and warehouses. Available from us with full technical support—visit barcodesinc.com or contact us today to order.

Selection depends on your specific requirements: choose the 3650-48FQ for maximum PoE power delivery and 10 Gigabit uplinks, the 3650-48PS for standard PoE with fiber flexibility, or the 3650-24PD for smaller deployments requiring 24 ports. Consider your facility size, number of powered devices (access points, cameras, IP phones), and required uplink bandwidth. Our team can help you select the ideal configuration—contact us today to discuss your network infrastructure needs.

The 48-port Catalyst 3850 models deliver 40 Gbps of throughput, while the 24-port models provide 20 Gbps, enabling high-performance data switching for enterprise environments. Available from us in both refurbished and new configurations, these switches are designed for mission-critical network infrastructure. Contact us today for current availability and pricing on the specific model you need.

The choice between 24-port models like the WS-C3650-24PD-S-RF and 48-port models like the WS-C3650-48PQ-L-RF depends on your network size and growth plans. The 24-port switches are ideal for smaller facilities or as distribution layer switches, while 48-port models provide greater port density for larger warehouses or consolidating multiple access points into fewer devices. Both support Layer 3 routing and PoE, so your decision should be based on the number of network endpoints (barcode scanners, mobile computers, access points) you need to connect. Visit barcodesinc.com or contact us today to discuss your specific network requirements and find the right switch configuration.

We offer both new and refurbished Cisco telecommunications products, including various configurations of the 8851 series and related models. Refurbished units provide cost-effective solutions while maintaining full functionality and compatibility with Cisco Unified Communications systems. Contact us today to discuss warranty options and availability of refurbished versus new units for your procurement needs.

We offer the Cisco Catalyst 2960L24PSLL-RF in refurbished condition with a Lifetime Limited Warranty through our comprehensive networking equipment catalog. Visit barcodesinc.com to check current availability, or contact us today for pricing, technical specifications, and assistance selecting the right switch configuration for your warehouse or logistics operation.

The Catalyst 3650 is a more advanced platform than the 2960X, offering superior performance, better management capabilities, and enhanced support for modern networking features required in today's warehouse automation environments. While both support PoE and Gigabit Ethernet, the 3650 provides better scalability and future-proofing for growing RFID and barcode scanning infrastructure. We offer both series in refurbished condition to fit various budget requirements. Contact us today to discuss which generation aligns with your network modernization goals.

We offer the Cisco WS-C3560CX12PDS-RF as a refurbished unit backed by a lifetime limited warranty, providing enterprise-grade reliability at a reduced cost compared to new equipment. This refurbished condition makes it an excellent choice for organizations looking to expand or upgrade their network infrastructure while managing capital expenses. Visit barcodesinc.com or contact us today to learn more about our refurbished networking equipment and warranty coverage options.

This refurbished unit comes with Cisco's Lifetime Limited Warranty, providing long-term protection for your investment. Contact us today at barcodesinc.com to discuss warranty details, support options, and any refurbished equipment certifications that may apply to your purchase.

The Cisco Catalyst 2960X series supports intelligent Layer 2 through Layer 4 services with advanced QoS, rate limiting, and multicast capabilities for granular network control. These manageable switches integrate with Cisco Network Assistant for simplified configuration and upgrades, enabling IT teams to efficiently administer network policies, VLAN segmentation, and security protocols. The switches also support per-VLAN Spanning Tree Plus (PVST+) to increase available bandwidth and enable traffic on redundant links.

Contact us today at barcodesinc.com to inquire about availability, pricing, and configuration options for the Cisco WS-C6513-E-RF. Our team of AIDC specialists can help you design a network solution tailored to your warehouse, logistics, or retail environment with proper power and module selection.

We offer the Cisco WS-C6513-E-FAN-RF as part of our comprehensive Cisco networking accessories inventory. Our team can help you source this component, verify compatibility with your existing infrastructure, and provide technical guidance on installation. Visit barcodesinc.com or contact us today to place your order and discuss your network cooling requirements.

The Cisco C-SM-16P4M2X incorporates advanced Layer 2 switching with support for MACSec (Media Access Control Security) and optional Layer 3 capabilities, providing robust security for sensitive logistics and warehouse data. The UADP ASIC architecture enables high-performance packet processing while maintaining security integrity across your network infrastructure. We offer complete implementation and support services—contact us today to discuss security requirements for your operation.

Cisco UCS power supplies are engineered for enterprise reliability with MTBF ratings of 536,060 to 710,300 hours depending on the specific model and operating conditions. This high reliability rating reflects Cisco's commitment to data center-grade components. Contact us today for detailed reliability documentation and support options available from us.

The Cisco UCS X-Series platforms supporting the UCSX-X10C-GPUFM are compatible with Windows Server 2022/2019 (Standard and Datacenter editions), Red Hat Enterprise Linux, and SUSE Linux Enterprise Server. These operating systems provide the necessary drivers and support for GPU acceleration and virtualization. Contact us today for assistance selecting the right OS configuration for your GPU computing requirements.

The C-SM-NIM-ADPT is a legacy Cisco accessory that may have limited availability. We maintain inventory of current and discontinued Cisco networking components, and our team can help locate this adapter or suggest compatible alternatives for your network expansion needs. Visit barcodesinc.com or contact us today to check current availability and explore options for your specific requirements.

Cisco UCSC-C240-M6 series servers support up to 8TB of DDR4-3200 memory across 32 total memory slots, while M7 and M8 generations support 8TB of DDR5 memory with faster speeds (DDR5-5600 for M7, DDR5-6400 for M8). This substantial memory capacity makes these servers ideal for memory-intensive workloads like databases, analytics, and virtualization. Contact us today for guidance on memory configurations that match your warehouse or data center requirements.

The Cisco CP-8811-3PCC-K9-RF is primarily designed as a desktop/wall-mounted office phone for stationary workstations rather than mobile warehouse or logistics operations. For warehouse and logistics environments requiring mobile communication capabilities, we offer Cisco mobile computers and specialized RFID and mobile computing solutions better suited to those demanding conditions. Visit barcodesinc.com or contact us today to discuss mobile telecommunications options for your logistics operations.

The Fargo HDP5600 features USB 2.0 and Ethernet connectivity with an internal print server for flexible deployment. It includes FARGO Workbench diagnostic utility with Color Assist spot-color matching software, and supports Windows XP/Vista/7, Server 2003/2008, and Linux operating systems for seamless integration into your existing infrastructure. Contact us today to discuss your specific connectivity and software needs.

The Epson LQ-590 is compatible with Windows XP, Windows Vista, Windows 7, Windows 8, and Windows 10. Contact us today at barcodesinc.com if you need assistance determining compatibility with your specific IT environment or legacy systems.