DSC PC1832PCB Access Control Panel

The Evolis KCD18402D is a kiosk printer designed for ID card production in high-volume environments. As a duplex printer with bezel, it enables organizations to print professional identification cards on both sides in a single pass, making it ideal for enterprises, government agencies, and institutions requiring efficient card issuance.

The NBE-2AC-13 is an IEEE 802.11ac wireless bridge operating at 2.40 GHz with a 330 Mbit/s data rate and 13 dBi gain. It features a single Gigabit Ethernet port (10/100/1000), supports channel sizes from 5 to 40 MHz, and includes dual linear polarization for flexible deployment in point-to-point or point-to-multipoint configurations.

Cisco StackWise technology is a revolutionary stacking architecture that allows you to combine up to nine Catalyst 3750 Series switches into a single, unified 32-Gbps switching unit. This creates a highly resilient system managed through one IP address and command-line interface, simplifying network management while delivering superior performance and fault tolerance for enterprise and branch office environments.

The SATO PV4 is a next-generation mobile label printer featuring a full-color LCD display, 203 dpi direct thermal printing at 5 inches per second, and a 4.1-inch maximum print width. It includes an extended-capacity battery and large media roll to minimize downtime, making it ideal for warehouse and logistics operations. The printer's lightweight, over-molded plastic construction provides durability while maintaining portability for indoor and outdoor use.

The Dell 400-BJKO is a 16TB internal hard drive with a 3.5" form factor, operating at 7200 RPM with SAS (12Gb/s) interface and 512e format. This drive is hot-pluggable, making it ideal for enterprise storage systems that require minimal downtime during drive replacement. We offer this drive as part of our comprehensive Dell storage solutions for data centers and high-capacity storage environments.

Yes, the Evolis KCD18402D ID Card Printer features both USB and Ethernet connectivity options. This dual connectivity allows for flexible deployment in network environments or direct connection to individual workstations, giving you the option that best fits your operational setup.

The Dell 400-BJKO uses the SAS (Serial Attached SCSI) 12Gb/s interface, which is standard across most enterprise servers and storage arrays manufactured over the past decade. Its 3.5" form factor fits standard drive bays in Dell PowerEdge servers and compatible third-party systems. Contact us today to verify compatibility with your specific infrastructure, and our team can recommend the right configuration for your deployment.

Yes, the SATO WWPV41260 is engineered for ruggedness and can withstand 6-foot drops to concrete, making it suitable for fast-paced warehouse, picking, and shipping environments. Its durable over-molded plastic design and robust construction ensure reliable performance in demanding logistics operations where equipment takes a beating during daily use.

The NBE-2AC-13 supports pole-mount, wall-mount, and window-mount installation options. A pole-mount kit is included with the unit, and optional window-mount accessories are available to expand deployment flexibility across warehouse, facility, and outdoor perimeter installations.

The Cisco Catalyst 3750X-48T-E features 48 10/100/1000 Gigabit Ethernet ports plus 4 Small Form-Factor Pluggable (SFP) ports per switch. This configuration provides flexible connectivity options for high-speed data networking in midsize organizations and enterprise branch offices.

Yes, the Evolis KCD18402D is a duplex printer with bezel, meaning it can print on both sides of an ID card in a single production cycle. This duplex capability significantly increases throughput and efficiency compared to simplex printers that require manual card flipping.

The 16TB capacity provides substantial storage density for warehouse management systems, inventory tracking, and logistics software that handle large transaction volumes and historical data. The hot-pluggable design minimizes operational disruptions when maintenance is required, critical for 24/7 warehouse operations. We recommend this drive for organizations managing complex supply chain and RFID data systems that demand reliable, high-capacity storage solutions.

The NBE-2AC-13 consumes a maximum of 6W and is powered via 24V, 0.5A PoE (Power over Ethernet). This allows for simplified installation using a single Ethernet cable for both data and power delivery, reducing infrastructure requirements in warehouse and logistics environments.

The SATO PV4 offers multiple connectivity options including USB, Serial, and Bluetooth connectivity, allowing seamless integration with warehouse management systems and mobile devices. This flexibility enables real-time label printing from various platforms without requiring extensive infrastructure changes. We offer this printer ready for deployment in your existing IT environment.

Yes, the Cisco WS-C3750X-48T-E includes integrated Power over Ethernet (PoE) capability supporting both Cisco pre-standard and IEEE 802.3af standards. You can deliver power to up to 48 ports at 7.3 watts per port, or up to 24 ports at 15.4 watts per port, making it ideal for powering wireless access points and IP phones throughout your facility.

The SATO WWPV41260 supports 0.50-inch and 0.75-inch core sizes with a maximum outer diameter of 2.60 inches, providing flexibility for different label roll sizes. The large media roll capacity is designed to minimize label roll changes and reduce downtime during extended printing operations in warehouse settings.

The NBE-2AC-13 is engineered for extreme environments with an operating temperature range of -40 to 80°C (-40 to 176°F), operating humidity of 5 to 95% noncondensing, and wind survivability up to 200 km/h (125 mph). It features an outdoor UV-stabilized plastic enclosure and has passed rigorous testing including salt fog, vibration, temperature shock, UV exposure, and wind-driven rain per IEC and MIL standards.

The Evolis KCD18402D is purpose-built as a kiosk printer with duplex printing and bezel design, making it well-suited for self-service card issuance stations. Its integrated design and reliable performance support continuous operation in high-traffic kiosk applications where uptime and consistency are critical.

Yes, the Dell 400-BJKO is designed for enterprise RAID deployments with its SAS interface and hot-pluggable capability, allowing seamless integration into RAID 5, RAID 6, or other redundancy configurations. The 7200 RPM speed and SAS connectivity provide the performance and reliability needed for RAID environments. Visit barcodesinc.com or contact us today to discuss RAID architecture recommendations for your storage needs.

The Cisco Catalyst 3750X delivers Layer 2-4 switching with intelligent services including dynamic IP routing and IPv6 support. This multilayer switching capability enables advanced network segmentation, quality of service, and security policies essential for modern enterprise networks.

The SATO PV4 is purpose-built for mobile warehouse operations including inventory management, picking, packaging, and shipping tasks where portable, real-time label printing is essential. Its combination of portability, battery capacity, and durability makes it ideal for both indoor warehouse environments and outdoor logistics operations where workers need to print labels on-demand.

512e (512-byte emulation) format means the drive uses 4KB physical sectors internally but reports 512-byte logical sectors to maintain compatibility with legacy systems and software. This format provides better performance and reliability than traditional 512-byte sectors while ensuring broad compatibility across enterprise environments. Our technical team can assist you in understanding how 512e formatting impacts your specific storage configuration.

The NBE-2AC-13 is equipped with an Atheros MIPS 74Kc processor running at 560 MHz, 64 MB of DDR2 memory, and 8 MB of Flash storage. These specifications support reliable management and data throughput for wireless bridge operations in logistics and warehouse applications.

Yes, the Cisco Catalyst 3750X includes an integrated wireless LAN controller capable of supporting up to 200 access points. This integrated functionality eliminates the need for a separate controller and simplifies wireless network deployment and management across your organization.

Yes, the Evolis KCD18402D is available from us as a special order item. Contact us today or visit barcodesinc.com to place your order and discuss your ID card printing requirements with our team.

Yes, the SATO WWPV41260 includes a built-in label dispenser as standard, enabling efficient label separation and application during warehouse operations. This integrated feature reduces the need for additional equipment and streamlines the printing workflow for picking, packing, and shipping tasks. Contact us today to learn how this printer can optimize your labeling operations.

The Dell 400-BJKO is designed to meet enterprise-grade environmental standards for data center and warehouse deployment, though specific temperature and humidity ranges should be verified with Dell's technical documentation. The drive's enterprise-class construction ensures reliability in demanding logistics and warehouse environments where consistent uptime is critical. Contact us today for detailed environmental specifications and guidance on optimal deployment conditions for your facility.

The NBE-2AC-13 is FCC, IC, and CE certified for wireless operation and is RoHS compliant. It also includes ESD/EMP protection rated at ±24 kV (air and contact), ensuring safe operation in environments with electrical equipment and electromagnetic interference common in industrial and warehouse settings.

The switch provides multiple availability features including 802.1S/W standards-based fault tolerance, Per VLAN Spanning Tree Plus (PVST+) for increased bandwidth on redundant links, and Flexlink with sub-100-millisecond convergence for rapid recovery. Additionally, AC power supply failure protection is available with an external redundant power supply option, ensuring continuous network operation.

The Evolis KCD18402D is part of Evolis' professional ID card printer portfolio, specifically designed for kiosk and high-volume production environments. We offer this printer along with compatible ID ribbons and supplies to support your complete card issuance workflow.