Datalogic 90A051330 Accessory

The SATO SR30LD-20036 labels measure 4 x 6.5 inches with 3-inch inner diameter and 8-inch outer diameter perforation, wound out format. Each roll contains 1,020 labels, and each carton includes 4 rolls for a total of 4,080 labels per carton. These direct thermal paper labels feature a permanent adhesive backing suitable for a wide range of labeling applications.

The RD-5G34 delivers 34 dBi of gain and operates across the 5.1 to 5.8 GHz frequency range. This high gain makes it ideal for long-distance point-to-point links, supporting extended coverage in wireless backhaul deployments.

The NBE-M5-300(US) features a 22 dBi gain antenna with 5150–5875 MHz operating frequency (US bands), an Atheros MIPS 74Kc 560 MHz processor, 64 MB DDR2 memory, and a single 10/100 Ethernet port. It consumes a maximum of 6W power via 24V PoE and supports channel sizes from 5 to 40 MHz with dual linear polarization.

The Ubiquiti POE-24-12W delivers 24V DC output at 500 mA, providing a maximum of 12W per port. This passive PoE injector maintains an output voltage range of 22-24VDC, making it suitable for powering compatible Ubiquiti network devices over a single Ethernet connection.

The Ubiquiti Networks LOCOM2 delivers 150+ Mbps real outdoor throughput with a range of up to 15km or more, depending on antenna configuration and environmental conditions. This extended range capability makes it ideal for point-to-multipoint wireless deployments across larger areas.

The AM-V5G-Ti operates across the 5.45 GHz to 5.85 GHz frequency band, making it suitable for 5 GHz wireless deployments. This frequency range allows it to integrate seamlessly with compatible RocketM5 radios to create powerful carrier-class base stations.

The LOCOM5 operates on the 5 GHz frequency band, making it suitable for point-to-multipoint wireless deployments that require higher bandwidth and less interference than 2.4 GHz alternatives. This frequency selection enables reliable long-range connectivity for outdoor applications.

The Ubiquiti Networks NB-2G18 Point to Multipoint Wireless bridge delivers a maximum outdoor range of 12.4 miles, making it ideal for long-distance wireless connectivity in warehouse and logistics environments. This extended range is achieved through its 18 dBi gain antenna operating in the 2.4 GHz frequency band.

The Ubiquiti Networks AirRouter is Ubiquiti's first indoor commercial Wi-Fi router, capable of delivering 150 Mbps speeds with a range of over 100 meters. It features powerful AirOS capabilities designed for commercial indoor deployments requiring reliable wireless connectivity across extended distances.

The Ubiquiti POE-15-12W delivers 15V DC at 800 mA output, providing 12W of power per port. This injector supports passive Power over Ethernet delivery and is designed for devices requiring lower voltage PoE than standard 48V systems.

The Ubiquiti POE-48-24W delivers 48V DC output at 500mA, providing up to 24W of power per port. This passive PoE injector is designed to power compatible Ubiquiti networking devices through standard Ethernet cabling. We offer this injector as part of our complete Ubiquiti product lineup available from barcodesinc.com.

The NB-5G25 delivers 150+ Mbps of real outdoor throughput with a range of up to 20+ km, making it ideal for long-distance point-to-multipoint wireless bridging. This performance is enabled by Ubiquiti's revolutionary AirMax DMA protocol, which provides carrier-class network performance.

The Ubiquiti Networks AM-M-V5G-Ti is a 5 GHz sector antenna with a frequency range of 5.45 to 5.85 GHz and provides 17 dBi of gain. This makes it suitable for long-range point-to-multipoint wireless deployments where extended coverage and directional RF performance are required.

The Ubiquiti Networks AMO-5G13 operates in the 5.45 to 5.85 GHz frequency range with a gain of 13 dBi. This high-gain omnidirectional design delivers extended range and coverage for airMAX-based networks. We offer the AMO-5G13 as part of our complete Ubiquiti wireless antenna lineup.

The NSM2 utilizes Ubiquiti's airMAX® MIMO TDMA protocol, which uses Time Division Multiple Access to eliminate hidden node collisions and maximize airtime efficiency. This time-slot method provides significant performance improvements in latency, throughput, and scalability compared to standard Wi-Fi protocol systems in its class.

The airMAX 900 MHz YAGI Antenna is designed to seamlessly integrate with the Rocket M900 radio, which is sold separately. The Rocket M900 provides the processing power for the antenna system, allowing you to build a complete 2x2 MIMO wireless solution.

InnerFeed technology integrates the entire radio system directly into the feedhorn of the antenna, creating a complete antenna and radio system integration. This revolutionary design provides affordable cost/performance solutions while maintaining the high performance and robust all-in-one construction that makes the AG-HP-5G23 ideal for wireless broadband applications.

The NanoBridge M2 NB-2G18 delivers 150+ Mbps of real outdoor throughput with a range of up to 20km or more. This performance is achieved through Ubiquiti's revolutionary AirMax TDMA protocol, which enables scalable, carrier-class point-to-multipoint network performance.

The NB-5G22(US) delivers 150+ Mbps of real outdoor throughput with a range of 20km or more, making it ideal for long-distance point-to-multipoint wireless bridging. This performance is enabled by Ubiquiti's revolutionary AirMaxDMA protocol, which provides scalable, carrier-class network performance for demanding outdoor deployments.

The NB-365G22 operates on the 3.65 GHz frequency band, specifically 3.65–3.675 GHz. This frequency range makes it ideal for point-to-multipoint wireless deployments in regions where this spectrum is available. We offer this model as part of our Ubiquiti Networks wireless product lineup.

The NB-9M13 operates on the 900 MHz frequency band with a gain of 13 dBi. This frequency band is ideal for long-distance point-to-multipoint wireless deployments in environments where extended range is required.

The Ubiquiti Nanobridge NB-5G25 delivers a maximum outdoor range of 12.4 miles, making it ideal for point-to-multipoint wireless deployments across warehouse campuses and logistics facilities. This extended range enables reliable connectivity without requiring additional infrastructure investments.

The Ubiquiti Networks NBE-M2-400(US) operates in the 2405-2475 MHz frequency band with an 18 dBi gain. This point-to-multipoint wireless system supports channel sizes of 5, 8, 10, 20, 30, and 40 MHz, making it flexible for various deployment scenarios. We offer this model for high-performance outdoor wireless links.

The Unitech MS852B LR supports most 1D and 2D barcodes, as well as special barcode formats. This broad compatibility makes it a versatile choice for diverse warehouse and manufacturing environments where you may encounter different barcode standards. Contact us today to discuss your specific barcode requirements.

Yes, the SATO SR30LD-20036 labels are specifically designed for SATO thermal printers. We offer a full selection of thermal transfer and direct thermal barcode labels optimized for SATO equipment. Contact us today to confirm compatibility with your specific printer model.

Yes, the RD-5G34 is designed as a carrier-class antenna for point-to-point (PtP) bridge and network backhaul applications. When paired with a Rocket basestation (sold separately), it creates a high-performance wireless endpoint capable of delivering bandwidth across extended distances.

The NBE-M5-300(US) features an innovative pole-mount design with a kit included for easy installation. The compact all-in-one design allows flexible mounting in a variety of configurations to suit your deployment needs.

The POE-24-12W accepts both 120V AC and 230V AC input, providing flexibility for deployment in different regional power environments. This dual-voltage capability makes it adaptable to various facility power standards without requiring separate units.

Yes, the LOCOM2 features 2x2 MIMO technology, which enables significantly faster and more reliable wireless links compared to earlier single-antenna designs. This dual-antenna approach improves both speed and range performance in outdoor deployments.

Yes, the AM-V5G-Ti is designed to seamlessly integrate with RocketM radios (sold separately). When paired together, the RocketM radio and this airMAX Sector Antenna create a powerful BaseStation combination that gives network architects unparalleled flexibility and convenience.

The LOCOM5 has a maximum power consumption of 6 watts and uses passive Power over Ethernet (PoE) for power delivery via pairs 4, 5+ and 7, 8 return. This low power requirement makes it efficient for remote installations and reduces operational costs.

The NB-2G18 supports IEEE 802.11n wireless standards with 150 Mbit/s throughput, providing reliable connectivity for point-to-multipoint networking applications. This speed is suitable for connecting remote facilities, warehouses, and distribution centers to your primary network infrastructure.

The AirRouter supports 802.11b/g/n wireless standards, making it compatible with a wide range of Wi-Fi devices. This ensures broad device compatibility for enterprise and commercial environments.

The POE-15-12W accepts both 120V AC and 230V AC input, making it suitable for use in different regional power standards. This dual-voltage capability ensures compatibility across various international installations.

The POE-48-24W accepts both 120V AC and 230V AC input, making it suitable for deployment in different geographic regions and electrical environments. This universal voltage input capability simplifies installation across diverse warehouse and facility locations. Contact us today for integration assistance with your existing power infrastructure.

The NB-5G25 features patent-pending InnerFeedntenna technology that delivers breakthrough MIMO antenna cost and performance. This innovative design provides higher antenna gain at a lower cost than traditional 5 GHz MIMO bridging solutions, making it the world's first cost-effective 5 GHz MIMO bridging device.

Yes, the AM-M-V5G-Ti sector antenna is designed to seamlessly integrate with RocketM radios to create a powerful BaseStation. The antenna features an integrated N-type male jack connector that connects directly to compatible RocketM radio units (RocketM sold separately).

Yes, the AMO-5G13 is designed to seamlessly integrate with RocketM radios to create a powerful 360-degree omnidirectional BaseStation. The antenna includes a RocketM bracket as part of the standard mounting kit, though the RocketM radio is sold separately. Contact us today for compatible RocketM radio options available from us.

The NSM2 operates reliably in temperatures from -30 to 75° C (-22 to 167° F) and humidity levels from 5 to 95% noncondensing. These specifications ensure the unit can function in diverse outdoor and indoor environments.

The airMAX 900 MHz YAGI Antenna delivers incredible range performance of 20+ km and breakthrough speed of 90+ Mbps. These specifications make it ideal for long-distance wireless backhaul and point-to-point links.

The AG-HP-5G23 operates in the 5 GHz frequency range, specifically supporting worldwide frequencies from 5170–5875 MHz (with USA operation from 5725–5850 MHz). This license-free frequency band enables deployment without regulatory licensing requirements.

The NB-2G18 operates at 2.4 GHz and provides 18 dBi of antenna gain. This high gain, combined with Ubiquiti's patent-pending InnerFeedntenna technology, delivers breakthrough MIMO antenna performance in a cost-effective solution.

The NB-5G22(US) features 22 dBi antenna gain, delivering higher antenna gain in a cost-effective package. This high gain is achieved through Ubiquiti's patent-pending InnerFeedntenna technology, which provides breakthrough MIMO antenna performance without the typical cost premium.

The NB-365G22 delivers 21.5–22.5 dBi antenna gain, providing strong directional coverage for long-distance point-to-multipoint links. This high gain rating enables reliable connectivity over extended distances while maintaining signal integrity. Contact us today to discuss your specific coverage requirements.

The NB-9M13 must be purchased in quantities of 5 units minimum. Contact us today at barcodesinc.com to place your order and discuss volume pricing options for your deployment.

The NB-5G25 supports IEEE 802.11n wireless standard with data rates up to 150 Mbit/s. This performance level is suitable for monitoring applications, inventory management systems, and other warehouse networking tasks that don't require gigabit speeds.

The NBE-M2-400 requires 24V PoE (Power over Ethernet) at 0.5A and consumes a maximum of 6W during operation. This low power consumption makes it efficient for remote deployments where power budgets are critical. Visit barcodesinc.com to verify compatibility with your existing PoE infrastructure.

The MS852B LR Bluetooth 2D imager scanner offers a scanning range of up to 68 feet (21 meters) from the host device. This extended range is ideal for warehouse, yard, and field service applications where barcodes are difficult to reach or located at a distance.

The SATO SR30LD-20036 uses direct thermal technology, where heat from the print head creates an image on chemically treated paper without requiring a ribbon. Direct thermal labels are ideal for applications with moderate durability requirements and lower print volumes, while thermal transfer labels use a ribbon and offer superior longevity in harsh environments. Our team can help you determine which technology best fits your warehouse or logistics needs.

The RD-5G34 features 2x2 dual-linear polarization with a minimum cross-pol isolation of 35 dB. This dual-polarity design provides excellent performance and flexibility for carrier-class wireless deployments.

Yes, the NBE-M5-300(US) is designed for outdoor use with a UV-stabilized plastic enclosure, operating temperature range of -40 to 70°C, and operating humidity of 5 to 95% non-condensing. It survives wind speeds up to 120 km/h (75 mph) and has undergone rigorous environmental testing including salt fog, vibration, temperature shock, UV, and wind-driven rain tests.

The POE-24-12W features 1 Ethernet input port and 1 Ethernet output port. This single-port design is ideal for injecting power into individual devices that require 24V passive PoE connectivity.

The LOCOM2 operates on IEEE 802.11b/g standards and is designed as a point-to-multipoint wireless bridge with a single 10/100 Ethernet port (RJ-45) for network connectivity. It supports passive Power over Ethernet (PoE) for simplified installation.

The AM-V5G-Ti delivers 21 dBi of gain, providing strong directional coverage for sector-based deployments. This high gain specification supports long-range outdoor wireless links and is optimized for carrier-class network performance.

Yes, the LOCOM5 is designed for outdoor use with an UV-stabilized plastic enclosure and operates across a wide temperature range from -30°C to 75°C (-22°F to 167°F) and humidity levels from 5% to 95% noncondensing. It also meets ETSI300-019-1.4 shock and vibration standards for rugged outdoor deployments.

The NB-2G18 features Power over Ethernet (PoE) capability, allowing you to power and network the device through a single cable connection. It includes one Fast Ethernet RJ-45 network port, simplifying installation on poles and outdoor mounting locations without requiring separate power lines.

Yes, the AirRouter supports both Ubiquiti PoE and 802.3af PoE power delivery options. This flexibility allows for simplified installation in locations where standard power outlets may not be readily available.

The Ubiquiti POE-15-12W features 1 Ethernet input port and 1 Ethernet output port. This single-port design makes it ideal for injecting power into individual devices on your network.

The POE-48-24W features one Ethernet input port and one Ethernet output port, allowing it to inject power into a single connected device. This single-port design makes it ideal for powering individual Ubiquiti access points or other compatible PoE devices in point-to-point deployments.

We offer AirControl, a powerful web-based network management application that allows you to centrally manage hundreds of Ubiquiti devices. AirControl provides network mapping, device status monitoring, mass firmware upgrades, and group device management capabilities.

The AM-M-V5G-Ti comes with a universal pole mount, RocketM bracket, and weatherproof RF jumpers included. This allows for flexible deployment on various mounting structures while maintaining environmental protection for outdoor installations.

The AMO-5G13 comes with a universal pole mount, RocketM bracket, and weatherproof RF jumpers included in the package. These components provide flexible deployment options for BaseStation installations. Visit barcodesinc.com to confirm current bundle contents and availability.

The NSM2 requires a 48V, 0.5A PoE (Power over Ethernet) adapter using passive PoE on pairs 4, 5+ and 7, 8 return, and is 802.3af compliant. Maximum power consumption is 6.5W, making it energy-efficient for extended deployments.

Unlike standard WiFi protocol, airMAX uses Time Division Multiple Access (TDMA) to assign each client pre-designated time slots, eliminating hidden node collisions and maximizing airtime efficiency. This approach delivers superior performance in latency, throughput, and scalability compared to other systems in its class.

The AG-HP-5G23 delivers breakthrough performance with up to 100+ Mbps in real outdoor throughput and an incredible range of up to 30+ km. It features a 23 dBi antenna gain and operates using Ubiquiti's airMAX TDMA protocol technology for robust point-to-multipoint wireless connectivity.

The NB-2G18 supports AirControl, a powerful web-based network management application that allows you to centrally manage hundreds of Ubiquiti devices. AirControl features include network mapping, device status monitoring, mass firmware upgrades, and task scheduling capabilities.

The NB-5G22(US) is compatible with AirControl, a powerful web-based network management application that allows you to centrally manage hundreds of Ubiquiti devices. AirControl provides network mapping, device status monitoring, mass firmware upgrades, and the ability to manage groups of devices through a single interface.

The NB-365G22 runs on Ubiquiti's airOS firmware, which includes advanced features such as airView spectrum analyzer functionality, airControl centralized network management, and support for multiple protocols and channelization options. These tools enable intuitive operation, real-time spectrum monitoring, and mass device management across your entire network. Available from us with full technical support.

The NB-9M13 runs airOS firmware, which includes airControl for centralized network management with features like network mapping, device status monitoring, mass firmware upgrades, web UI access, device group management, and task scheduling. Additionally, airView provides advanced spectrum analyzer functionality with waterfall, waveform, and real-time spectral views to identify noise and optimize network performance.

The NB-5G25 is pole-mountable and features a single RJ-45 Ethernet port supporting both Ethernet and Fast Ethernet connectivity. This straightforward mounting and connectivity design simplifies deployment in outdoor warehouse and logistics environments.

The NBE-M2-400 is built with an outdoor UV-stabilized plastic enclosure and passes rigorous environmental testing including salt fog, wind-driven rain, temperature shock, vibration, and UV exposure per IEC standards. It survives wind speeds up to 120 km/h (75 mph) and operates reliably across temperatures from -40°C to 70°C (-40°F to 158°F). This makes it suitable for demanding warehouse, logistics, and outdoor infrastructure deployments.

Yes, the MS852B LR is specifically designed as an ideal choice for warehouse, yard, field service, and manufacturing facility applications. Its wireless Bluetooth connectivity and extended 68-foot scanning range make it well-suited for environments where barcodes are difficult to access or positioned at height.

The SATO SR30LD-20036 features a permanent adhesive backing, designed for long-term label retention on packages, pallets, and shipping containers. This permanent adhesive ensures labels remain securely attached throughout the shipping and handling process in warehouse and logistics environments.

The RD-5G34 offers 34 dBi of gain in a 1050-mm diameter dish, while the RD-5G30 provides 30 dBi of gain in a smaller 650-mm diameter size. The RD-5G34's larger reflector and higher gain make it suitable for longer-range point-to-point links, whereas the RD-5G30 is more compact for shorter distances.

The NBE-M5-300(US) operates in the 5 GHz band with US-specific frequency support across U-NII-1 (5150–5250 MHz), U-NII-2A (5250–5350 MHz), U-NII-2C (5470–5725 MHz), and U-NII-3 (5725–5850 MHz) bands. It supports flexible channel sizes of 5, 8, 10, 20, 30, and 40 MHz.

The POE-24-12W uses passive PoE methodology with 24V DC output, which is compatible with Ubiquiti devices designed for passive 24V power over Ethernet. It is not compatible with standard IEEE 802.3af/at PoE devices, which require different voltage and power delivery methods.

Yes, the LOCOM2 is built with an outdoor UV-stabilized plastic enclosure designed to withstand environmental stress. It operates reliably across a wide temperature range and humidity levels, making it suitable for permanent outdoor installation.

The AM-V5G-Ti is rated for operating temperatures from -40°C to 80°C and operating humidity from 5% to 95% condensing. The antenna features outdoor UV stabilized plastic construction and meets ETSI300-019-1.4 shock and vibration specifications for reliable outdoor deployment.

The LOCOM5 features one 10/100 Mbps Ethernet port (RJ-45) for network connectivity. This single interface supports standard data rates and is compatible with passive PoE power delivery for simplified installation in outdoor point-to-multipoint networks.

The NB-2G18 runs Ubiquiti's airOS firmware, which provides an intuitive web-based interface requiring no special training to operate. Additionally, you can leverage airControl, Ubiquiti's centralized network management application, to monitor device status, manage multiple units, and schedule firmware upgrades across your entire wireless network.

The AirRouter is designed as an indoor commercial router with powerful AirOS features for reliable performance. For environments with particularly challenging RF conditions or high device density, we recommend consulting with our team to ensure optimal deployment.

The POE-15-12W uses passive Power over Ethernet delivery at 15V DC, which differs from standard IEEE 802.3af/at PoE that operates at higher voltages. Compatibility depends on your specific device's power requirements—verify your equipment supports 15V passive PoE before deployment. Contact us today for guidance on device compatibility.

The POE-48-24W uses passive PoE technology with a 48V DC output, which is compatible with Ubiquiti devices designed for this voltage specification. It is not compatible with standard IEEE 802.3af/at PoE devices that expect 48-57V input on specific pin pairs. We recommend verifying device compatibility before deployment—contact us today for guidance on your specific setup.

Yes, the NB-5G25 features a compact and robust mechanical design that provides complete weatherproof performance. It includes enhanced RF and Ethernet ESD/Surge protection to enable prolonged operation in the harshest environments, with activity and signal strength LEDs for installer convenience.

The AM-M-V5G-Ti is rated for outdoor use with operating temperatures ranging from -40°C to 80°C and operating humidity from 5 to 95% (non-condensing). The antenna enclosure is constructed from outdoor UV stabilized plastic to withstand harsh environmental conditions.

The AMO-5G13 has a wind survivability rating of 125 mph and carries a wind loading of 12 lb at 100 mph. This robust construction makes it suitable for outdoor deployment in demanding environmental conditions. We offer the AMO-5G13 for warehouse, logistics, and outdoor network infrastructure applications.

The NSM2 is designed for multiple deployment scenarios including Point-to-MultiPoint (PtMP) client links in airMAX networks, Point-to-Point (PtP) wireless bridges, and as a powerful wireless client. Its compact form factor and high performance make it versatile and economical for various network topologies.

Yes, the airMAX 900 MHz YAGI Antenna is specifically designed to perform at ultra-long ranges in Non-Line-of-Sight (NLOS) applications. Its high-gain array design enables reliable connectivity even when direct line-of-sight is not available.

The AG-HP-5G23 is engineered for outdoor durability with wind survivability rated at 200 km/h (125 mph) and wind loading of 102 N at that speed. Its robust all-in-one design and integrated construction make it suitable for deployment in challenging outdoor conditions.

The NB-2G18 runs airOS firmware, an intuitive operating system designed to require no training to operate, along with integrated airView spectrum analyzer functionality. airView provides waterfall, waveform, and real-time spectral views to help you identify noise signatures and plan networks to minimize interference.

The NB-5G22(US) features enhanced RF and Ethernet ESD/Surge protection, enabling prolonged operation in harsh outdoor environments. The compact and robust mechanical design provides complete weatherproof performance with a small visible footprint, and activity and signal strength LEDs are provided for installers to monitor device status.

The NB-365G22 requires 24V, 1A PoE (Power over Ethernet) power supply using passive PoE on pairs 4, 5+ and 7, 8 return, with a maximum power consumption of 6.5W. It features one 10/100 Mbps Ethernet networking interface and two RP-SMA waterproof RF connections for antenna flexibility. Visit barcodesinc.com for complete technical specifications.

The AM-9M13 antenna paired with the NB-9M13 has a wind survivability rating of 125 mph, making it suitable for deployment in challenging outdoor environments. The antenna also has a maximum VSWR of 1.5:1 and dual-linear polarization for reliable performance.

The NB-5G25 runs Ubiquiti's airOS firmware, which provides an intuitive web-based interface requiring no training to operate. It also integrates airView spectrum analyzer functionality for identifying noise signatures and optimizing network performance in multi-point deployments.

The NBE-M2-400 features one 10/100 Ethernet port for connectivity and is powered by an Atheros MIPS 74Kc processor running at 560 MHz with 64 MB DDR2 RAM and 8 MB Flash memory. This configuration provides reliable point-to-multipoint wireless bridging for network extension in warehouse and logistics operations.

The MS852B LR features both Bluetooth wireless connectivity and USB connectivity options. This dual-connectivity design provides flexibility to integrate with various host systems and allows you to choose the connection method that best fits your operational needs.

The SATO SR30LD-20036 is priced per case, with each case containing 4 rolls of 1,020 labels each, totaling 4,080 labels per carton. This bulk packaging is ideal for high-volume warehouse and logistics operations. Visit barcodesinc.com or contact us today for current pricing and bulk order options.

The RD-5G34 comes with a universal pole mount, RocketM bracket, and weatherproof RF jumpers included. The antenna is designed for outdoor industrial applications with robust mechanical construction using industrial-strength hardware.

The NBE-M5-300(US) requires 24V, 0.5A PoE (Power over Ethernet) and has a maximum power consumption of 6W, making it efficient for remote deployments where power management is critical.

According to Ubiquiti's specifications, the POE-24-12W operates in temperature ranges and humidity conditions suitable for network infrastructure environments. We recommend consulting the detailed datasheet or contacting our team for specific environmental operating parameters to ensure proper deployment in your facility.

The LOCOM2 uses passive Power over Ethernet (PoE) on pairs 4, 5+ and 7, 8 return for both power and network connectivity through a single Ethernet cable. It includes a pole-mount kit for easy outdoor installation on existing infrastructure.

The AM-V5G-Ti is a Carrier Class 2x2 Dual Polarity MIMO Sector Antenna, providing advanced RF isolation and variable beamwidth capabilities. This dual-polarity design enables efficient spatial multiplexing for improved network capacity and performance.

The LOCOM5 supports WPA2 AES encryption for secure wireless communications. It also provides QoS capabilities with packet-level classification and WMM support to prioritize traffic based on user-defined priority levels (High/Medium/Low).

Yes, the NB-2G18 integrates airView, an advanced spectrum analyzer tool that provides waterfall, waveform, and real-time spectral views. This allows your team to identify noise signatures and plan your network topology to minimize interference in congested 2.4 GHz environments.

The AirRouter includes Ethernet ports for wired connectivity and supports external antennas for optimized wireless coverage. This combination of wired and wireless connectivity options makes it suitable for flexible commercial network deployments.

The available product data does not specify the operating temperature and humidity ranges for the POE-15-12W model. We recommend contacting our team at barcodesinc.com for detailed environmental specifications to ensure this injector meets your facility requirements.

According to the available technical documentation, the POE-48-24W is designed for standard indoor operating conditions. For complete environmental specifications including temperature and humidity ranges, we recommend contacting our team at barcodesinc.com to access the full datasheet.

The NB-5G25 runs Ubiquiti's airOS firmware, an intuitive operating system designed to require no training. It also includes airView spectrum analyzer functionality with waterfall, waveform, and real-time spectral views to help you identify noise signatures and optimize network planning.

The AM-M-V5G-Ti is designated as a Titanium-class antenna featuring advanced RF isolation and variable beamwidth capabilities as a Carrier Class 2x2 Dual Polarity MIMO sector antenna. These characteristics provide network architects with unparalleled flexibility and superior RF performance for demanding wireless deployments.

The AMO-5G13 features dual-linear polarization with a minimum cross-polarization isolation of 25 dB. This 2x2 dual-polarity MIMO design provides enhanced signal quality and network performance. These specifications ensure reliable carrier-class performance for professional network deployments available from us.

The NSM2 features one 10/100/1000 Mbps Ethernet port and one 10/100 Mbps Ethernet port, along with two RP-SMA waterproof RF connections for antenna flexibility. It supports web server, SNMP, SSH, Telnet, DHCP, NAT, bridging, and routing services.

The Ubiquiti AMY-9M16-2 operates in the 900 MHz band, specifically 902 MHz to 928 MHz, with a gain of 16 dBi. This UHF frequency range is ideal for long-range outdoor wireless networking.

The AG-HP-5G23 combines Ubiquiti's InnerFeed and airMAX technologies to create a simple yet powerful wireless CPE (Customer Premises Equipment) solution. Its lightweight, low-cost, high-performance all-in-one design makes it versatile and ideal for several different point-to-multipoint wireless broadband applications.

Yes, the NB-2G18 features a compact and robust design with complete weatherproof performance and a very small visible footprint. It includes enhanced RF and Ethernet ESD/surge protection to enable prolonged operation in harsh outdoor environments.

The NB-5G22(US) runs on airOS, Ubiquiti's intuitive firmware technology designed to require no training to operate. It also includes airView, which provides advanced spectrum analyzer functionality with waterfall, waveform, and real-time spectral views to help identify noise signatures and plan networks to minimize interference.

Yes, the NB-365G22 is designed for outdoor use with an UV-stabilized plastic enclosure and operating temperature range of –30 to 75°C (–22 to 167°F). It also provides ±24KV ESD/EMP protection and meets ETSI300-019-1.4 shock and vibration standards, making it suitable for demanding outdoor wireless deployments. Contact us today for site-specific installation guidance.

Yes, the NB-9M13 is designed for professional outdoor installation. According to Ubiquiti's terms of use, the radio device must be professionally installed with shielded ethernet cable and earth grounding as conditions of product warranty, and installers must follow local country regulations for frequency channels and output power.

Yes, the NB-5G25 is compatible with airControl, Ubiquiti's web-based network management application that allows you to centrally manage entire networks of devices. airControl enables network mapping, device status monitoring, mass firmware upgrades, and task scheduling across distributed warehouse locations.

The NBE-M2-400 supports 802.11g modulation with data rates from 1 to 24 Mbps, transmit power of 28 dBm (±2 dB), and receive sensitivity of -97 dB. It features dual linear polarization and includes four WLAN signal strength LEDs that are software-adjustable to correspond to custom RSSI levels for real-time link monitoring.

The Unitech MS852B LR barcode scanner comes with a protective case included. This protective case helps safeguard your scanner during transport and storage in demanding warehouse and field environments.

The SATO SR30LD-20036 labels feature a wound-out configuration with 3-inch inner diameter (ID) and 8-inch outer diameter (OD) perforation. The wound-out design allows labels to unwind easily during printing, making them compatible with standard SATO label printer mechanisms and reducing jam risks in high-speed printing environments.

The RD-5G34 is rated to survive winds up to 200 km/h (125 mph) with a wind loading of 1,028 N at that speed. This robust design ensures reliable performance in harsh outdoor environments typical of network backhaul and ISP deployments.

The NBE-M5-300(US) includes comprehensive ESD/EMP protection rated at ±24 kV for both air and contact discharge, ensuring reliable operation in electrically challenging environments. It also holds FCC, IC, and CE wireless approvals and is RoHS compliant.

We offer the Ubiquiti POE-24-12W PoE injector as part of our comprehensive AIDC and networking solutions. Visit barcodesinc.com or contact us today to check availability, pricing, and delivery options for your warehouse or logistics infrastructure needs.

Both the LOCOM2 and NanoStation M (NSM2) share the same core 2x2 MIMO technology and 150+ Mbps throughput capability, but feature different form factors—the LOCOM2 has a more compact design optimized for point-to-multipoint links. We offer both models available from us for different deployment scenarios.

The AM-V5G-Ti features an integrated N-type Male Jack that connects directly to compatible RocketM radios. The antenna includes a universal pole mount and RocketM bracket with weatherproof RF jumpers included for complete installation.

Yes, we offer the Ubiquiti Networks LOCOM5 as part of our comprehensive wireless networking product lineup. Contact us today or visit barcodesinc.com to check current availability and pricing for this cost-effective 5 GHz CPE solution.

The Ubiquiti NB-2G18 is specifically designed for outdoor point-to-multipoint wireless applications and is pole-mountable, making it well-suited for warehouse perimeters, distribution centers, and logistics facilities. Professional installation is required, and shielded ethernet cable with proper earth grounding must be used to maintain product warranty compliance.

We offer the Ubiquiti Networks AirRouter as part of our comprehensive data networking product lineup. Visit barcodesinc.com or contact us today to check availability, pricing, and to discuss your specific wireless networking requirements.

No, the POE-15-12W is a single-port injector with one Ethernet input and one output port, designed to power one device at a time. If you need to power multiple devices, you would require additional injectors or a PoE switch. Visit barcodesinc.com to explore multi-port PoE solutions available from us.

No, the POE-48-24W is designed as a single-port injector with one Ethernet input and one Ethernet output, allowing it to power only one device at a time. For deployments requiring power distribution to multiple devices, you may need multiple injectors or a managed PoE switch. Visit barcodesinc.com to explore our full range of Ubiquiti PoE solutions for your network architecture.

The NB-5G25 operates at 5 GHz with a 25 dBi antenna gain, featuring patent-pending InnerFeedntenna technology for breakthrough MIMO performance. The compact design provides a very small visible footprint while maintaining high-performance wireless bridging capabilities.

Yes, the AM-M-V5G-Ti is designed for outdoor deployment with performance capabilities exceeding 50km range (antenna dependent). Its sector antenna design, high gain, and dual-polarity MIMO configuration make it well-suited for long-distance point-to-multipoint wireless network architectures.

The AMO-5G13 measures 799 x 90 x 65 mm and weighs 0.82 kg, with dimensions and weight including the pole mount but excluding the RocketM radio. The compact form factor makes it suitable for various mounting locations while maintaining the 13 dBi gain performance. Contact us today for installation guidance and deployment planning.

Yes, the NSM2 includes WPA2 AES security encryption and supports Quality of Service (QoS) with packet-level classification via WMM and user-level priority settings (High/Medium/Low). It also provides statistical reporting for uptime, packet errors, data rates, and wireless distance monitoring.

Yes, airMAX Antennas are designed with robust mechanical design for outdoor application use. The antenna is engineered to withstand outdoor environmental conditions while maintaining high-performance connectivity.

Yes, the AG-HP-5G23 is available as a 5-pack configuration, making it suitable for deployments requiring multiple units. Contact us today at barcodesinc.com to discuss bulk ordering options for your wireless broadband infrastructure project.

The NB-2G18 includes activity and signal strength LEDs provided for installers to easily monitor device status and signal quality during installation and operation. The device supports standard Ethernet connectivity for network integration and management.

Yes, the NB-5G22(US) is the world's first cost-effective 5 GHz MIMO bridging solution, delivering breakthrough wireless performance with dual linear polarization support. Its MIMO capabilities combined with the 22 dBi antenna gain make it ideal for high-performance point-to-multipoint deployments where cost-effectiveness is important.

The NB-365G22 must be purchased in quantities of 5 units. This minimum order requirement applies to all orders of this model. Contact us today to place your order or discuss volume pricing and delivery options.

The AM-9M13 antenna has dimensions of 1290 x 290 x 134 mm and weighs 12.5 kg (including pole mount, excluding RocketM). The antenna includes universal pole mount, RocketM bracket, and weatherproof RF jumpers for complete installation support.

While the product datasheet references Ubiquiti's environmental testing standards including temperature shock and wind-driven rain tests, specific operating temperature ranges for the NB-5G25 model are not detailed in the available documentation. Contact us today for complete environmental specifications for your deployment requirements.

Yes, the NBE-M2-400(US) holds wireless approvals from the FCC and IC (Industry Canada) for North American deployment, and also carries CE certification for European markets. The unit is also RoHS compliant, ensuring it meets environmental and safety standards. Contact us today to confirm regulatory compliance for your specific deployment region.

The Unitech MS852B LR has an IP42 rating, which provides protection against dust and water spray. This durability rating makes it suitable for general warehouse and manufacturing environments where the scanner may encounter light moisture or dust exposure.