Cisco CON-SNTP-2960S4TS Service Contract

The GENIUS-1602G-2D features an area-imaging engine that scans virtually all 1D and 2D barcodes with ease. The scanner supports all standard barcode symbologies and is GTIN compliant with GS1 DataBar capability, making it versatile for retail, warehouse, and field service applications. For a complete listing of all supported barcode symbologies, visit Honeywell's compliance documentation.

The Cisco C3KX-FAN-23CFM-RF is a remanufactured fan module accessory designed for Catalyst 3K-X series switches. This cooling fan module helps maintain optimal operating temperatures within your Cisco networking equipment, ensuring reliable performance and extended hardware lifespan in data center and enterprise environments.

The Cisco Catalyst 3850 network modules are available in three configurations: the C3850-NM-4-1G with 4 x Gigabit Ethernet ports, the C3850-NM-2-10G with 2 x 10 Gigabit Ethernet SFP+ and 2 x Gigabit Ethernet SFP ports, and the C3850-NM-4-10G with 4 x 10 Gigabit Ethernet SFP+ ports (supported on 48-port models only). All modules are hot swappable and can be mixed in various combinations to meet your network expansion needs. We offer all three configurations available from barcodesinc.com.

The Cisco C3850-NM-4-1G network module provides 4 x Gigabit Ethernet ports, making it ideal for organizations requiring standard Gigabit connectivity expansion on their Catalyst 3850 switches. This module is hot-swappable and can be combined with other network modules to create flexible port configurations. We offer this module as part of our complete Cisco networking solutions available from barcodesinc.com.

The C9200L-STACKKIT-RF is a stack kit designed specifically for Cisco Catalyst 9200L switches. It includes two data stack adapters and one data stack cable, allowing you to connect multiple C9200L switches into a unified stack for simplified management and increased throughput. We offer this accessory to expand your existing C9200L deployments.

The Cisco QSFP-4X10G-AOC10M is a 40GBASE Active Optical Cable breakout transceiver that converts a single QSFP port into four SFP+ ports, enabling 10 Gigabit connections over fiber optic cable. This module is ideal for high-density network deployments in data centers and enterprise environments where you need to maximize port density while maintaining reliable optical connectivity. We offer this transceiver module as part of our comprehensive Cisco networking inventory.

The Cisco C9200L-STACK-KIT includes two data stack adapters and one data stack cable, designed specifically for C9200L switch models. This kit enables you to stack multiple C9200L switches together to create a unified switching fabric. We offer this stack kit as part of our comprehensive Cisco networking accessories inventory.

The Cisco C3KX-NM-10GT-RF is a 10 Gigabit Ethernet network module designed for the Catalyst 3K-X switch platform, enabling high-speed data networking and optical connectivity. This module expands your switch's port capacity for enterprise data center and campus network deployments. We offer this module as part of our comprehensive Cisco networking solutions available from barcodesinc.com.

Yes, the GENIUS-1602G-2D is fully compatible with both Android and iOS devices via Bluetooth connectivity. It's MFi Certified for iOS compatibility and features Bluetooth v2.1 Class 2 wireless connectivity with a 10-meter (33 feet) range, making it ideal for tablet-based retail point-of-sale and field service applications. The scanner works seamlessly with BUYiQ software integration.

No, the C9200L-STACK-KIT is designed exclusively for C9200L SKUs and is not compatible with the original C9200 switches. Cisco offers a separate C9200-STACK-KIT for the original C9200 models. Contact us today to ensure you order the correct stack kit for your switch model.

The QSFP-4X10G-AOC10M features a 10-meter (approximately 32.81 feet) active optical cable, making it suitable for medium-distance interconnects within data center environments and network closets. The extended length provides flexibility in rack and switch placement without requiring additional cable management infrastructure. Contact us today for availability and integration support with your network architecture.

No, the C9200L-STACKKIT-RF is designed exclusively for C9200L SKUs. Cisco offers a separate C9200-STACK-KIT for standard C9200 switches, which includes the same components but is optimized for that product line. Using the correct stack kit ensures proper compatibility and performance.

The C3KX-NM-10GT-RF is specifically designed for the Catalyst 3K-X switch series and integrates into the available network module expansion slots. For compatibility verification with your specific switch model and configuration, contact us today—our team can confirm whether this module is the right fit for your infrastructure.

The C3KX-FAN-23CFM-RF is specifically engineered for Catalyst 3K-X series switches. We recommend verifying your exact switch model against Cisco's compatibility documentation before ordering. Contact us today at barcodesinc.com if you need help confirming compatibility with your specific equipment.

The C3850-NM-4-1G network module is designed for the Cisco Catalyst 3850 Series stackable switches and supports both 24-port and 48-port models. The module is hot-swappable, allowing you to install or replace it without downtime, and can be used in any combination with other compatible network modules. Contact us today for compatibility verification with your specific switch configuration.

Yes, all Cisco Catalyst 3850 network modules are hot swappable, allowing you to add or replace modules without powering down your switch. This design enables flexible network expansion and upgrades with minimal downtime in your data center or warehouse environment. Contact us today to discuss module configurations that fit your infrastructure requirements.

The C3850-NM-4-1G provides 4 x Gigabit Ethernet ports for standard connectivity, while the C3850-NM-2-10G offers hybrid connectivity with 4 x Gigabit Ethernet ports plus 2 x 10 Gigabit Ethernet SFP+ ports for higher-speed requirements. The 10G module supports both 10 Gigabit and Gigabit Ethernet SFP transceivers, allowing flexible upgrades as your network demands evolve. We have both options available from us to match your bandwidth and budget requirements.

The C9200L-STACKKIT-RF comes with a default 50 cm data stack cable. However, we also offer extended cable options of 1 meter and 3 meters to accommodate different rack configurations and switch spacing requirements in your data center environment.

The Cisco C3KX-NM-10GT-RF supports 10 Gigabit Ethernet connectivity with SFP+ (mini-GBIC) optical transceiver slots, allowing flexible fiber optic deployment. This enables you to leverage single-mode or multi-mode fiber for long-distance, high-speed data transmission in your network backbone. Visit barcodesinc.com to explore compatible SFP+ transceiver options available from us.

The C9200L-STACK-KIT comes with a default 50 cm data stack cable, but options of 1 meter and 3 meter cables are also available from us. This flexibility allows you to configure your switch stack architecture based on your physical rack layout and spacing requirements.

The QSFP-4X10G-AOC10M is designed for Cisco network devices that support QSFP transceiver modules, including switches, routers, and network convergence systems with compatible QSFP ports. Before purchasing, verify that your equipment supports QSFP breakout modules and has the necessary software licensing for breakout functionality. Visit barcodesinc.com or contact our team to confirm compatibility with your specific network infrastructure.

The GENIUS-1602G-2D delivers up to 2,250 scans per full charge with an expected 12 hours of operation time. The scanner features a 750 mAh Li-ion battery that fully charges in approximately 3 hours, providing all-day productivity for warehouse and retail environments.

The C3850-NM-4-10G provides four 10 Gigabit Ethernet SFP+ ports and is supported only on 48-port Catalyst 3850 models, while the C3850-NM-2-10G offers two 10 Gigabit Ethernet SFP+ ports combined with two Gigabit Ethernet SFP ports for mixed-speed deployments. The 4-port module is ideal for high-bandwidth applications, while the 2-port module provides flexibility for gradual network upgrades. Visit barcodesinc.com to find the right module for your topology.

Remanufactured means this fan module has been professionally restored to like-new condition, tested for performance, and certified to meet Cisco's original specifications. Remanufactured accessories offer significant cost savings compared to new units while maintaining full functionality and reliability for your network infrastructure.

The GENIUS-1602G-2D has a depth of field ranging from 44mm to 115mm (1.7" to 4.5") for 5 mil Code 39 barcodes at optimal focus. It supports motion tolerance up to 10 cm/s (4 in/s) for 13 mil UPC codes and features a horizontal scan angle of 41.4° and vertical scan angle of 32.2°, enabling fast and reliable scanning from multiple angles.

Active optical cables like the QSFP-4X10G-AOC10M offer superior performance over longer distances, lower power consumption, immunity to electromagnetic interference, and better signal integrity compared to passive copper cables. They are ideal for high-speed 40G and 100G deployments where signal degradation is a concern, and they generate less heat in dense network environments. We offer both active optical and copper transceiver options to match your specific distance and performance requirements.

Stacking kits allow you to interconnect multiple Cisco C9200L switches into a single logical unit, simplifying management, reducing latency, and improving overall network performance. This is ideal for warehouse and logistics environments where you need scalable, unified network infrastructure. Visit barcodesinc.com to explore how stacking can optimize your network topology.

Yes, the C9200L-STACKKIT-RF enables you to stack multiple Catalyst 9200L switches into a single logical unit. This provides simplified management through a single IP address and control point, while increasing overall bandwidth and availability for your network infrastructure.

Based on similar Catalyst 3850 network modules in this product family, the C3KX-NM-10GT-RF provides multiple expansion slots for SFP+ optical modules, allowing you to customize port density based on your deployment needs. For exact slot specifications and configuration details, contact us today and our team can provide detailed technical documentation.

The C3KX-FAN-23CFM-RF is rated for 23 CFM (cubic feet per minute) maximum airflow, as indicated by its model designation. This airflow capacity is optimized for the thermal management requirements of Catalyst 3K-X series platforms in standard operating environments.

Yes, the SFP+ interfaces on Cisco C3850 network modules support both 10 Gigabit Ethernet and Gigabit Ethernet transceivers, allowing you to use existing Gigabit Ethernet SFP investments and upgrade to 10 Gigabit Ethernet when business demands change. This backward compatibility protects your infrastructure investment without requiring comprehensive switch upgrades. We offer compatible transceivers and modules—contact us today for availability.

Yes, the Cisco Catalyst 3850 switches support multiple hot-swappable network modules in various combinations, allowing you to customize your port configuration based on your connectivity needs. You can mix and match modules such as the C3850-NM-4-1G, C3850-NM-2-10G, and C3850-NM-4-10G to achieve the exact port mix required for your network. Visit barcodesinc.com to explore module combinations and find the right solution for your infrastructure.

Yes, the GENIUS-1602G-2D is designed to withstand harsh warehouse conditions with an IP42 environmental sealing rating and the ability to survive 30 drops from 1.4 meters (4 feet) to concrete. It operates reliably in temperatures from 0°C to 50°C (32°F to 122°F) and humidity levels up to 95% non-condensing, backed by a 3-year factory warranty.

Yes, we offer the Cisco C3KX-FAN-23CFM-RF and a complete selection of Cisco networking accessories and spare parts. Visit barcodesinc.com or contact us today to check current availability, pricing, and lead times for this remanufactured component.

Cisco Catalyst 3850 Series switches operate in environments ranging from -5°C to +45°C, making them suitable for standard data center and warehouse deployments. The switches also feature redundant fans and power supplies (available in 350W AC, 715W AC, 1100W AC, and 440W DC options) to ensure reliable operation in demanding logistics and warehouse environments. Visit barcodesinc.com for complete environmental specifications and power supply options.

The Cisco Catalyst 3850 Series switches operate reliably in temperatures ranging from -5°C to +45°C, making them suitable for standard data center and network closet environments. The switches feature redundant fans and power supplies for high availability, along with multiple power supply options including 350W AC, 715W AC, 1100W AC, and 440W DC configurations. Our team can help you select the appropriate power and environmental specifications for your deployment.

Yes, you can mix different cable lengths (50 cm, 1 m, and 3 m) when building your C9200L stack, provided each switch pair is connected with a compatible data stack cable. This allows you to customize your stacking configuration to fit your specific rack and facility layout requirements.

The QSFP-4X10G-AOC10M is a breakout cable that splits one QSFP connection into four SFP+ connections, so it serves a different purpose than standard single-port transceivers and may not be a direct replacement for legacy modules. If you're upgrading from older SFP or SFP+ infrastructure, we recommend consulting with our team to design a migration path that matches your bandwidth and port density needs. Contact us today to discuss your network upgrade strategy.

The stack kit includes two data stack adapters that connect to the switches and one data stack cable (50 cm default) that links the adapters together. These components work together to create a high-speed connection between stacked switches, enabling them to function as a unified system.

Cisco network modules are engineered for reliable operation in standard data center and network closet environments with typical temperature and humidity controls. For specific environmental specifications, power requirements, and thermal considerations, contact us today—we can provide the complete technical datasheet and help you plan your deployment.

Active optical cables like the QSFP-4X10G-AOC10M are engineered to operate reliably in standard data center environments with controlled temperature and humidity, and they offer excellent EMI resistance compared to copper alternatives. For specific operating temperature ranges, humidity specifications, and environmental durability details, we recommend reviewing the technical documentation or contacting our team. Visit barcodesinc.com to request detailed specifications for your deployment planning.

The C9200-STACK-KIT is designed for the original C9200 switch models, while the C9200L-STACK-KIT is specifically engineered for C9200L switches. Both kits contain two data stack adapters and one data stack cable, but they are not interchangeable. Contact us today to verify which kit matches your switch hardware.

The Catalyst 3K-X platform supports multiple network module types within available slots, allowing you to combine different port densities and speeds based on your network architecture. However, configuration compatibility depends on your specific switch model and firmware version. Contact us today and our team can help you design an optimal modular configuration for your network requirements.

The C9200L-STACKKIT-RF is available from us at Barcodes Inc. Contact us today or visit barcodesinc.com to check current availability and pricing for this Cisco Catalyst 9200L stacking accessory and explore our complete inventory of network switches and accessories.

The Cisco Catalyst 3850 Series switches support comprehensive management through SNMP v1, v2c, v3, command-line interface (CLI), and web-based management tools, providing flexibility for integration into your existing network management infrastructure. The switch also features Cisco's Unified Access Data Plane (UADP) ASIC technology for uniform wired-wireless policy enforcement and application visibility. Contact us today to learn how we can support your network management and monitoring requirements.

Replacement fan modules like the C3KX-FAN-23CFM-RF are critical for maintaining proper thermal management in network switches, preventing overheating that can cause performance degradation or equipment failure. Regular fan maintenance and timely replacement of worn cooling components help ensure continuous network uptime and extend the operational life of your infrastructure investments.

The Cisco Catalyst 3850 Series supports comprehensive management through SNMP v1, v2c, v3, command-line interface (CLI), and web-based management, enabling IT teams to monitor and control network operations from multiple platforms. The platform also features the new Unified Access Data Plane (UADP) ASIC for uniform wired-wireless policy enforcement and application visibility. Contact us today to learn how we can support your network management and monitoring requirements.

The GENIUS-1602G-2D comes with a USB cable, wrist strap, and neck strap for convenient carrying and use. Optional accessories and chargers are available to expand functionality and meet specific operational needs. Contact us today at 312-765-8855 or [email protected] to discuss accessory options for your deployment.