Cisco CON-SNT-C200WGK9 Service Contract

The Cisco PWR-C5-BLANK= is a Config 5 power supply blank cover designed for Catalyst 9500 series switches. This accessory fills empty power supply slots, maintaining proper airflow and chassis integrity when a power supply module is not installed. We offer this genuine Cisco part to help you maintain optimal network equipment configuration.

The PWR-C5-125WAC delivers 12V at 10.5A output with a 20ms minimum holdup time at 100VAC input. This 125W AC power supply features an IEC 320-C14 input receptacle and is rated for 10A power cord usage. We offer this Cisco accessory as part of our comprehensive power supply inventory available from barcodesinc.com.

The Cisco PWR-C5-1KWAC delivers 54V at 16.5A output, providing 1kW of AC power capacity. This supply is designed to support high-power networking equipment and offers a 20ms minimum output holdup time at 100 VAC to ensure stable operation during power fluctuations. We offer this accessory as part of our comprehensive Cisco power supply inventory available from barcodesinc.com.

The Cisco PWR-C5-600WAC delivers 54V at 11.1A output with a 20ms minimum holdup time at 100 VAC, making it suitable for high-density network deployments. This 600W AC power supply features an IEC 320-C16 input receptacle and supports a 15A power cord rating for reliable operation in enterprise environments.

The Cisco PWR-C6-125WAC delivers 12V at 10.5A output with a 20ms minimum output holdup time at 100 VAC input. This 125W AC power supply is designed for Cisco networking equipment requiring reliable DC power conversion from standard AC wall outlets with an IEC 320-C14 input receptacle.

The PWR-C5-125WAC accepts input current ranging from 1.6A to 0.7A, supporting standard AC power configurations across different voltage conditions. This makes it suitable for various deployment environments where power input fluctuations may occur. Contact us today for compatibility verification with your specific Cisco equipment.

The PWR-C5-BLANK= is designed for Catalyst 9500 series switches that use Config 5 power supply slots. This blank cover is compatible with any Catalyst 9500 chassis configured with the C5 power supply architecture. Contact us today if you need to verify compatibility with your specific switch model.

The Cisco PWR-C5-1KWAC features an IEC 320-C16 input receptacle with a 15A power cord rating, making it compatible with standard industrial power distribution systems. This connector type is commonly used in enterprise networking environments for reliable power delivery. Contact us today to verify compatibility with your specific installation requirements.

Yes, the PWR-C5-600WAC is designed for Cisco Catalyst series switches and edge platforms that require 600W AC power supplies. We offer this accessory as a replacement or additional power supply for compatible Catalyst configurations—visit barcodesinc.com to verify compatibility with your specific switch model.

The PWR-C6-125WAC is the newer generation successor to the PWR-C5-125WAC, offering the same 12V at 10.5A output specifications and identical 20ms output holdup time. Both models use the same IEC 320-C14 input receptacle, though we recommend verifying compatibility with your specific Cisco equipment model before ordering.

The PWR-C6-125WAC requires an input current range of 1.6A to 0.7A from a standard AC power source. This efficient current draw makes it suitable for deployment in data center and network closet environments where power distribution capacity may be limited.

The PWR-C5-BLANK= is designed for Config 5 power supply slots, while the PWR-C4-BLANK= is designed for Config 4 slots—these are not interchangeable. Both serve the same purpose of covering unused power supply bays on their respective Catalyst 9500 configurations. Ensure you order the correct blank cover for your specific switch configuration.

The Cisco PWR-C5-600WAC accepts input current between 7-2.8A and is designed for standard AC power environments. For complete electrical specifications and installation requirements, contact us today to ensure proper integration with your power distribution infrastructure.

The PWR-C5-1KWAC accepts input current ranging from 12A to 6A depending on the input voltage conditions, supporting standard 100-240 VAC operation. This wide input current range ensures the power supply can adapt to various electrical infrastructure configurations across different facilities. Visit barcodesinc.com for detailed technical specifications and compatibility information.

The PWR-C5-125WAC is designed as a power supply accessory for Cisco networking equipment, though specific compatibility depends on your switch model and configuration. We recommend consulting the detailed specifications or contacting our team to confirm compatibility with your particular Catalyst series switch. Visit barcodesinc.com or reach out to verify your equipment requirements.

Yes, the PWR-C5-1KWAC is designed as a modular power supply accessory that supports redundant power setups in enterprise networking environments. Its 1kW capacity and reliable 20ms output holdup time make it suitable for mission-critical infrastructure where power continuity is essential. We offer this supply alongside complementary Cisco power accessories to build robust power architectures—contact us today for system design assistance.

The PWR-C5-600WAC provides 54V at 11.1A output, while the higher-capacity PWR-C5-1KWAC delivers 54V at 16.5A, making it suitable for larger deployments requiring greater power budgets. Both models feature identical 20ms holdup time specifications and IEC 320-C16 receptacles, allowing you to choose based on your power requirements.

The PWR-C6-125WAC features two LED indicators: the 'AC OK' LED indicates that input power to the power supply is working properly, while the 'PS OK' LED confirms that output power from the power supply is functioning correctly. These visual indicators help quickly diagnose power supply status in network installations.

Power supply blank covers maintain proper chassis airflow and cooling efficiency by filling empty power supply bays. They also prevent dust and debris from entering the chassis through unused slots, extending equipment lifespan and reliability. Installing the appropriate blank cover is a best practice for network equipment maintenance.

The PWR-C5-125WAC uses an IEC 320-C14 (IEC60320-C14) power-supply input receptacle, which is a standard connector type for enterprise networking equipment. This connector type ensures compatibility with standard IEC power cords rated for 10A operation. We stock compatible power cords and cables to complete your installation.

The PWR-C5-600WAC features an IEC 320-C16 power input receptacle, which is the standard connector for higher-capacity AC power supplies in enterprise networking equipment. This connector type ensures secure connections and supports the 15A power cord rating required for safe operation.

The PWR-C5-1KWAC provides 1000W capacity compared to 600W and 125W alternatives in the Cisco power supply line, delivering significantly higher output at 54V and 16.5A for power-intensive network equipment. The 1kW rating makes it ideal for larger chassis systems and aggregated PoE delivery, while smaller supplies suit edge devices and lower-power platforms. We stock multiple wattage options to match your specific infrastructure needs—visit barcodesinc.com to compare all available Cisco power supplies.

Yes, the PWR-C5-BLANK= is an original Cisco accessory manufactured by Cisco for their Catalyst 9500 series switches. We offer genuine Cisco parts backed by manufacturer specifications and quality standards. Visit barcodesinc.com to verify authenticity and order with confidence.

The Cisco PWR-C6-125WAC uses an IEC 320-C14 (IEC60320-C14) input receptacle with a 10A power cord rating. This is a standard three-pin connector commonly found on enterprise networking equipment and compatible with most data center power distribution infrastructure.

The PWR-C5-125WAC is a compact 125W solution ideal for lower-power Cisco devices, while higher-wattage options like the PWR-C5-600WAC (600W) and PWR-C5-1KWAC (1000W) serve more demanding equipment with greater power requirements. The 125W model's smaller form factor and lower input current (1.6-0.7A) make it suitable for space-constrained or lower-power deployments. Contact us today to determine which power supply capacity matches your infrastructure needs.

We offer a complete range of Catalyst 9500 power supply solutions including various wattage AC and DC power supplies, redundant power configurations, and related blank covers for different Config levels. Our inventory includes PWR-C4-BLANK=, C9K-PWR-C5-BLANK, and multiple power supply modules across different specifications. Contact us today to find the complete power supply solution for your Catalyst 9500 deployment.

We offer the Cisco PWR-C6-125WAC accessory in our inventory at competitive pricing. Contact us today at barcodesinc.com or reach out to our team to check current availability, pricing, and lead times for this Cisco power supply component.

The Cisco PWR-C5-600WAC is designed to work in multi-supply configurations on compatible Catalyst platforms, providing redundancy and load-sharing capabilities for mission-critical network deployments. Contact us today for guidance on configuring redundant power supplies for your specific switch model and availability requirements.

The Cisco PWR-C5-1KWAC is engineered to Cisco's enterprise-grade standards with proven reliability in data center and network closet environments, featuring standardized IEC connector compliance and industrial-rated components. The 20ms output holdup time ensures graceful handling of brief power interruptions, protecting connected equipment from unexpected shutdowns. Contact us today to discuss environmental specifications, certifications, and deployment requirements for your facility.

Based on Cisco power supply standards, these units typically operate in temperature ranges from 23 to 113°F (-5 to 45°C) with storage capability from -40 to 158°F (-40 to 70°C) in non-condensing humidity conditions up to 90%. The PWR-C5-125WAC maintains reliable output holdup time of 20ms minimum at 100VAC, ensuring continuity during power fluctuations. Visit barcodesinc.com or contact our team for complete environmental specifications and deployment guidance.