Cisco CON-SAS-CISCHN2 Service Contract

The Cisco C9400-PWR-BLANK= is a power supply blank cover accessory designed for the Catalyst 9400 Series switches. This blank filler is used to cover unused power supply slots in the chassis, maintaining proper airflow and system integrity. We offer this accessory as part of our complete Cisco Catalyst 9400 component lineup available from barcodesinc.com.

The Cisco C9600-PWR-2KWAC delivers a maximum power output of 2000W, making it suitable for mid-to-high-density Catalyst 9600 Series deployments. This power supply supports both combined mode and N+1 redundant mode operations, allowing you to scale power delivery across multiple units. We offer this accessory as part of our comprehensive Cisco networking solutions at barcodesinc.com.

The Cisco C9400-PWR-2100AC= is a 2100W AC power supply designed for the Catalyst 9400 Series switches. This power supply delivers reliable AC input power to support high-performance network deployments. We offer this accessory as part of our comprehensive Cisco power systems inventory.

The EP-R6 is an intelligent WISP control point designed as part of the EdgeMAX platform for wireless service provider deployments. It combines EdgeMAX routing features with fiber backhaul and versatile powering capabilities, making it ideal for tower and outdoor network control applications.

The Cisco C9800-AC-750W-RED is a 750W AC power supply designed for the Cisco Catalyst 9800-40 series switches and routers. This redundant power supply ensures high availability and seamless failover protection for converged data, voice, and video networks, helping maintain uninterrupted operation in mission-critical environments.

The Cisco C6840-X-750W-AC is a 750W AC power supply designed for Cisco networking equipment. This power supply provides reliable AC input conversion with specifications optimized for enterprise-grade network infrastructure. Contact us today for detailed technical specifications and compatibility information for your specific Cisco platform.

The Cisco C9400-PWR-3200AC is a 3200W AC power supply designed for the Catalyst 9400 Series switches. This high-capacity power module provides reliable power delivery for enterprise-class network infrastructure. Contact us today to verify compatibility with your specific switch configuration.

The Cisco C9800-AC-750W-R is a 750W AC power supply designed for Cisco Catalyst 9800 series platforms. This power supply delivers 54V output at 11.1A and includes a 20ms minimum output holdup time at 100 VAC to ensure stable operation during brief power interruptions. Contact us today to verify compatibility with your specific Catalyst 9800 configuration.

The C6840-X-750W-AC power supply supports standard AC input voltages of 100-240VAC at 50-60 Hz, making it suitable for global deployment across different electrical standards. This wide input voltage range ensures compatibility with power systems in North America, Europe, Asia, and other regions. Visit barcodesinc.com for complete electrical specifications and power cord requirements.

The C9400-PWR-3200AC is specifically designed for the Cisco Catalyst 9400 Series. Power supply compatibility varies across different Catalyst series and models, so it's important to verify your switch model before ordering. Visit barcodesinc.com or contact us today to confirm compatibility with your equipment.

The C9800-AC-750W-RED is specifically designed for the Cisco Catalyst 9800-40 platform. We recommend verifying your exact switch model against Cisco's power supply compatibility matrix to ensure proper installation. Contact us today for compatibility confirmation with your specific configuration.

The C9800-AC-750W-R is specifically designed for Cisco Catalyst 9800 series platforms, including the 9800-40 model. We recommend verifying your exact switch model and power requirements before ordering, as different Catalyst configurations support different power supply options. Contact us today and our team can confirm the right power supply for your deployment.

The C9400-PWR-2100AC= is specifically designed for the Cisco Catalyst 9400 Series platform. For compatibility with other Catalyst models like the C9600 Series, alternative power supply modules such as the C9600-PWR-2KWAC= may be required. Contact us today to verify compatibility with your specific switch configuration.

The C9600-PWR-2KWAC is an AC-only power supply that accepts 100 to 240 VAC autoranging input at 47 to 63 Hz. If you require DC power capability for your Catalyst 9600 Series chassis, we also offer the C9600-PWR-2KWDC, which supports 24Vdc to 60Vdc input. Contact us today to determine the best power supply configuration for your network infrastructure.

FiberProtect is a technology featured in the EP-R6 that significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI), while improving data signal integrity. It also consolidates wired data backhaul to a single fiber cable run for long-distance connectivity, reducing installation complexity.

The C9400-PWR-BLANK= is compatible with Cisco Catalyst 9400 Series chassis including the C9404R, C9407R, and C9410R models. This blank cover is designed to fit the power supply slot configuration across these modular chassis platforms. Contact us today to verify compatibility with your specific deployment configuration.

Cisco Catalyst 9400 Series power supplies operate under normal conditions from -5°C to +45°C at altitudes up to 5,000 feet (1,500m), with extended range support up to +40°C at 10,000 feet (3,000m). Storage temperature range extends from -40°C to +70°C. These specifications ensure reliable operation across diverse data center and network environments.

Yes, the C9600-PWR-2KWAC can be mixed with other Catalyst 9600 Series power supplies in combined mode or N+1 redundant mode, provided all power supplies are of equal wattage. You can also mix AC and DC power supplies as long as the AC input voltage is 220V or higher. Visit barcodesinc.com or contact us today for guidance on configuring redundant power systems for your deployment.

The EP-R6 features 5 ports with Gigabit Ethernet connectivity and includes PoE ports for powering connected devices. It also includes 1 slot for expansion or additional connectivity options.

Cisco Catalyst 9400 Series switches support multiple power supply configurations including 650W AC, 930W DC, 1600W AC, and 1600W DC options, with redundant versions available for high-availability deployments. When power supply slots are not in use, blank covers like the C9400-PWR-BLANK= maintain proper chassis cooling and aesthetics. We stock a full range of Catalyst 9400 power modules and accessories—visit barcodesinc.com to explore all available options.

The C9400-PWR-3200AC operates on AC input power with an IEC 320-C16 connector. The power supply includes a 15A rated power cord and is designed for standard enterprise data center AC power distribution. We offer this accessory along with compatible power distribution options for your network setup.

The Cisco C9800-AC-750W-R uses an IEC 320-C16 power input receptacle, which is a standard industrial connector rated for 15A power cord compatibility. This connector type is common across enterprise networking equipment and supports the 100-240 VAC input voltage range required for global deployments. We stock this accessory and can assist with proper installation specifications.

The Cisco C9800-AC-750W-RED operates normally between -5°C to +45°C at altitudes up to 5,000 feet (1,500m), with extended operating range to -5°C to +40°C at up to 10,000 feet (3,000m). It maintains 5% to 90% relative humidity (noncondensing) and can be stored at temperatures from -40°C to +70°C, making it suitable for most data center and network environments.

The C6840-X-750W-AC is a Cisco power supply accessory designed for use with compatible Cisco Catalyst platform equipment. Compatibility depends on your specific switch model and configuration requirements. Contact us today to verify compatibility with your existing Cisco infrastructure and ensure proper power delivery for your network deployment.

The C6840-X-750W-AC utilizes IEC 320 standard connectors for power input, which are industry-standard connections used across enterprise networking equipment. The specific connector type and power cord rating are designed to meet safety and performance requirements for Cisco platforms. We offer compatible power cords and accessories—visit barcodesinc.com or contact us today for the right connector configuration for your installation.

The C9400-PWR-3200AC maintains a minimum 20ms output holdup time at 100 VAC input, ensuring continuity during brief power fluctuations. This specification helps protect your network equipment from momentary power interruptions common in data center environments. Our team can help you understand how this specification fits your infrastructure requirements.

Yes, the EP-R6 is built with a ruggedized case designed to withstand outdoor conditions including wind, rain, and snow. It comes with a cable sleeve to protect cables and the cable opening, and you can replace it with your own conduit if preferred.

Yes, the C9400-PWR-BLANK= blank cover can be used in redundant power supply configurations to fill empty slots while maintaining system airflow and protection. In redundant setups, you would install active power supplies in the required slots and use blanks to cover any unused power supply bays. Contact us today for guidance on designing a redundant power architecture for your Catalyst 9400 deployment.

The C9800-AC-750W-R draws between 7-2.8A input current across its 100-240 VAC operating range, making it suitable for standard datacenter and enterprise network cabinet power distribution. This current range ensures the power supply operates efficiently across different international voltage standards (50-60 Hz). Visit barcodesinc.com or contact us today for detailed electrical specifications for your facility planning.

Yes, the C9800-AC-750W-RED is a redundant power supply module that provides automatic failover protection. When configured in a redundant pair, it ensures seamless power continuity and protection against single power supply failures, maintaining network availability during maintenance or equipment failures.

The Cisco C9400-PWR-2100AC= meets stringent safety and EMC compliance standards including UL 60950-1/62368-1, FCC Part 15 Class A, EN 55032 Class A, and CE Marking requirements. These certifications ensure the power supply meets international safety and electromagnetic compatibility standards for enterprise network deployments.

The C9600-PWR-2KWAC has an AC input current range of 7.1 to 3.0A (maximum) with an input surge current of less than 50A. The power supply features a 20ms minimum output holdup time at 100 VAC, ensuring stable operation during brief power fluctuations. We provide complete technical specifications to help you plan proper power distribution and circuit protection for your Catalyst 9600 deployment.

The C9400-PWR-3200AC provides higher power capacity than the C9400-PWR-2100AC, supporting more demanding switch configurations and greater PoE delivery capabilities. Both are designed for the Catalyst 9400 Series but serve different deployment scales. Contact us today to determine which power supply matches your network's power requirements.

The Cisco C9600-PWR-2KWAC weighs 1.2 kg (2.65 lbs), making it a compact and lightweight accessory for your Catalyst 9600 Series chassis. This minimal weight footprint allows for easy installation and maintenance without requiring additional structural support. Available from us at barcodesinc.com for immediate delivery.

As a Layer-3 router, the EP-R6 provides powerful routing features such as load balancing and failover capabilities. These features deliver redundancy and increased performance for outdoor WISP deployments.

We offer both the C9400-PWR-2100AC= (2100W) and C9400-PWR-3200AC= (3200W) options for Catalyst 9400 deployments. The 3200W model provides higher power capacity for configurations requiring greater power headroom and redundancy. Contact us today to determine which power supply capacity best matches your network infrastructure requirements.

Cisco power supplies in this class typically operate within a temperature range of 23 to 113°F (-5 to 45°C) during normal use, with storage temperatures rated from -40 to 158°F (-40 to 70°C). These environmental specifications ensure reliable performance in controlled data center and network closet environments. Contact us today for detailed environmental compliance documentation and installation guidance.

The Cisco C9800-AC-750W-RED meets comprehensive international safety standards including UL 60950-1/62368-1, CAN/CSA-C22.2, EN 60950-1/62368-1, and IEC 60950-1/62368-1, plus CE Marking and CCC compliance. It also complies with EMC standards including FCC Part 15 Class A, ICES-003, and EN 55032, ensuring safe operation in enterprise network environments.

The C9800-AC-750W-R is an AC power supply accessory for Catalyst 9800 series switches and provides primary platform power rather than dedicated PoE budgeting. PoE capabilities depend on your specific Catalyst 9800 model configuration. We recommend contacting our team to discuss your PoE requirements and ensure you select the appropriate power supply and module combination.

Cisco Catalyst 9400 Series power systems operate in normal conditions from -5°C to +45°C at altitudes up to 5,000 feet, with extended operation possible to 10,000 feet at -5°C to +40°C. Storage temperature range is -40°C to +70°C with 5% to 90% relative humidity (noncondensing). Proper airflow management using components like the C9400-PWR-BLANK= ensures optimal thermal performance in your data center environment.

The Cisco C9400-PWR-2100AC= is available from us at barcodesinc.com as part of our complete Cisco Catalyst accessory inventory. We stock genuine Cisco power supplies and related components to support your network infrastructure needs. Visit barcodesinc.com or contact us today for current availability and pricing.

We offer the Cisco C9800-AC-750W-RED as part of our comprehensive Cisco networking accessory inventory. Visit barcodesinc.com to check availability and pricing, or contact us today for volume quotes, technical specifications, and rapid delivery options to your warehouse or data center.

The C9400-PWR-3200AC features an IEC 320-C16 input receptacle with a 15A rated power cord for secure AC connections. The module is designed as a hot-swappable accessory for the Catalyst 9400 chassis, allowing for redundant power configurations. Visit barcodesinc.com to view detailed specifications and order this power supply accessory.

We offer the Cisco C6840-X-750W-AC and other Cisco power supply accessories as a leading AIDC distributor. Our team provides competitive pricing, fast shipping, and technical support to help you maintain your network infrastructure. Visit barcodesinc.com today or contact us to place an order and discuss volume discounts or integration with your IT procurement process.

The C9400-PWR-BLANK= is typically sold as a separate accessory and may not be included with all Catalyst 9400 chassis purchases. We offer this blank cover as an individual component to help you customize your switch configuration and manage unused power supply slots. Contact us today or visit barcodesinc.com to order the C9400-PWR-BLANK= and other Catalyst 9400 accessories for your network infrastructure.

The C9600-PWR-2KWAC uses an IEC 320-C16 (IEC60320-C16) input receptacle, which is a standard industrial power connector rated for 15A. This connector type ensures compatibility with standard power distribution infrastructure in data centers and network facilities. Contact us today if you need guidance on power cord selection or installation requirements for your Catalyst 9600 deployment.

As an authorized distributor of Cisco networking equipment, we offer the C9800-AC-750W-R with manufacturer support and warranty coverage. Cisco power supplies typically include standard hardware warranty and technical support through our team. Contact us today for specific warranty terms, replacement options, and technical support details for this accessory.

The EP-R6 features an all-in-one compact design that efficiently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance. This streamlined approach reduces deployment complexity and operational overhead at tower sites.