Cisco ASR1004-PWR-AC= Accessory

The USP-PDU-Pro features 16 AC power outlets, 4 USB Type-C ports, and a network RJ-45 connection for remote management. This combination makes it ideal for powering multiple devices in network closets and server environments while providing both local and remote power control capabilities.

The Ubiquiti UACC-OM-SM-10G-D-20 supports a maximum distance of 32,808.40 feet (approximately 10 kilometers) over single-mode optical fiber. This extended reach makes it ideal for long-distance data center interconnections and campus network aggregation links.

The Ubiquiti Rocket ac R5AC-Lite delivers up to 500+ Mbps throughput using airMAX ac technology. This performance is achieved through the airMAX Engine with custom IC processing, making it suitable for high-speed point-to-point and point-to-multipoint wireless links.

The PBE-M5-400 delivers a maximum outdoor range of 15.5 miles, making it ideal for long-distance point-to-point wireless bridging in warehouse and logistics environments. This extended range is achieved through its 25 dBi antenna gain and 5 GHz operating frequency.

The UDM-SE includes (3) 10/100/1000 Ethernet ports and (1) RJ45 serial console port for network connectivity and management. These ports support standard Ethernet connections for integrating the device into your network infrastructure.

The USW-ENTERPRISE48POE features 48 10/100/1000 Mbps RJ45 Ethernet ports, plus 2 1/10 Gbps SFP+ ports and 2 1 Gbps SFP ports for uplink connectivity. This gives you comprehensive port density for enterprise-scale deployments available from us.

The Ubiquiti PS-5AC-US is an IEEE 802.11ac wireless bridge operating at 5 GHz with 450 Mbit/s throughput. It features one 10/100/1000 Gigabit Ethernet port and supports both Access Point and Station modes, making it suitable for point-to-point and point-to-multipoint wireless deployments. The device includes dual RP-SMA waterproof RF connectors for flexible antenna configurations.

The Ubiquiti UISP-CONNECTOR-SHD is a shielded RJ45 surge protection connector designed for Ethernet cable applications in the UISP network infrastructure system. It provides ESD (electrostatic discharge) protection to safeguard your network equipment from voltage spikes and electrical damage during installation and operation.

The USP-PDU-Pro supports both 120V AC and 230V AC input, making it suitable for deployment in North American and international facilities. This dual-voltage capability eliminates the need for separate units across different regions.

This module features a 1 x LC Duplex connector, which is the standard small form-factor connector for high-speed optical networking. The LC duplex design allows for both transmit and receive connections in a compact footprint.

The R5AC-Lite supports IEEE 802.11ac with MIMO technology and operates on the 5 GHz band. It offers selectable channel widths of 10/20/30/40/50/60/80 MHz for point-to-point mode and 10/20/30/40 MHz for point-to-multipoint mode, providing flexible deployment options based on your network requirements.

The UDM-SE is equipped with 2 GB DDR3 RAM and 4 GB of on-board flash storage. This configuration provides sufficient capacity for running UniFi network management and controller functions.

The USW-ENTERPRISE48POE delivers a maximum of 34.2W PoE+ power per port using IEEE 802.3af/at standard with voltage range of 50–57V in 802.3at mode. This enables you to power high-draw devices like access points and cameras directly from the switch.

Yes, the UISP-CONNECTOR-SHD is designed for outdoor use as part of Ubiquiti's TOUGHCable system, which has been engineered to perform in harsh weather and extreme environments. The shielded design and surge protection make it suitable for professional outdoor network deployments.

Yes, the PS-5AC-US is designed as a pole-mountable wireless bridge with a die-cast aluminum enclosure featuring white powder coating for outdoor durability. It operates across an extended temperature range of -40 to 80°C and supports 5 to 95% noncondensing humidity, making it suitable for harsh outdoor warehouse and logistics environments.

The PBE-M5-400 features a single Gigabit Ethernet port (10/100/1000) and delivers 150+ Mbps throughput. It supports flexible channel sizes from 5 to 40 MHz and dual linear polarization for reliable data transmission in warehouse and logistics operations.

The PS-5AC-US operates on 24V passive PoE (Power over Ethernet) using pairs 4, 5+ and 7, 8 for return, with a maximum power consumption of 9.5W. A 24V, 1A Gigabit PoE adapter is included with the device, and it supports a voltage range of 18-26VDC for flexible power deployment in warehouse and logistics facilities.

Yes, this transceiver module is fully compatible with 10 Gigabit Ethernet networks, supporting the 10GBase-X standard at 10 Gbit/s data rates. It operates at 1310 nm wavelength on single-mode fiber, making it suitable for long-distance 10GbE deployments.

The USP-PDU-Pro is rated to operate in environments with temperatures between -5 to 40°C (23 to 104°F) and humidity levels from 5 to 95% noncondensing. These specifications ensure reliable operation in standard data center and network equipment rooms.

The R5AC-Lite features a single 10/100/1000 Gigabit Ethernet (RJ-45) port for network connectivity and operates with a 24V Gigabit PoE power supply. Maximum power consumption is 9.5W, and it supports passive PoE using pairs 4, 5+ and 7, 8 for power delivery.

Yes, the UDM-SE supports rackmount installation, making it suitable for deployment in standard server racks within data centers or network closets. This allows for efficient space utilization in enterprise environments.

The PBE-M5-400 uses passive PoE (Power over Ethernet) with a 24V, 0.5A Gigabit PoE power supply, supporting a voltage range of 18-26VDC. Maximum power consumption is only 8W, making it energy-efficient for outdoor deployments.

This switch provides 140 Gbps switching capacity with 70 Gbps total non-blocking throughput and a forwarding rate of 104.16 Mpps. These specifications ensure wire-speed performance for demanding warehouse and logistics network environments.

The connector provides comprehensive ESD damage protection with specifications of ± 24 kV for both air and contact discharge events. This level of protection helps prevent devastating electrostatic discharge attacks that could damage sensitive networking equipment.

The UDM-SE requires a 12VDC, 1A power adapter (included) and supports a power input range of 9 to 24VDC. Maximum power consumption is 7W, making it energy-efficient for continuous network management operations.

Yes, the USP-PDU-Pro is designed as a 1U high rack-mount unit, making it ideal for installation in standard 19-inch equipment racks alongside switches, routers, and other network infrastructure. This form factor helps maximize space efficiency in server rooms and network closets.

The PS-5AC-US implements WPA2 AES encryption as its primary security standard, along with support for multiple authentication services including SSH Server and Telnet. The device also provides VLAN support and QoS capabilities with packet-level classification and WMM (Wi-Fi Multimedia) to prioritize traffic by user-defined levels (High/Medium/Low).

Yes, the R5AC-Lite is designed for outdoor wireless deployment with an operating temperature range of -40 to 80°C (-40 to 176°F) and operating humidity of 5 to 95% noncondensing. The device features a die-cast aluminum enclosure with white powder coating and includes ESD/EMP protection rated at ±24 kV contact/air for the Ethernet port.

The module operates at 1310 nm wavelength, which is a standard long-wavelength used for single-mode fiber optic communications. This wavelength is optimized for extended-distance transmission over single-mode fiber infrastructure.

The UISP-CONNECTOR-SHD is an RJ45 connector designed specifically for use with Ubiquiti's TOUGHCable shielded Ethernet cables as part of the UISP system. It features a shielded design that works with industrial-grade cabling to maximize performance and reliability.

Yes, the USW-ENTERPRISE48POE is a 1U high rack-mount switch with dimensions of 485 x 43.7 x 374.6 mm and weighs 6.1 kg. It includes rack-mount brackets and fits standard 19-inch equipment racks for data center and server room deployments.

The PBE-M5-400 is engineered for harsh outdoor environments with an operating temperature range of -40 to 70°C, operating humidity of 5 to 95% non-condensing, and wind survivability up to 200 km/h (125 mph). Its galvanized steel dish and powder-coated brackets with GEOMET-coated fasteners provide superior corrosion resistance.

The UISP-CONNECTOR-SHD is rated for operating temperatures between -5 to 45°C (23 to 113°F) and operating humidity from 5 to 95% non-condensing. It meets ETSI300-019-1.4 standards for shock and vibration resistance, making it suitable for demanding outdoor network environments.

Yes, the UACC-OM-SM-10G-D-20 is designed for both data networking and optical network applications. It provides reliable 10 Gigabit Ethernet connectivity for network infrastructure requiring high-speed optical interconnection.

In Point-to-Point (PtP) mode, the PS-5AC-US supports channel sizes of 10, 20, 30, 40, 50, 60, and 80 MHz. In Point-to-Multipoint (PtMP) mode, it supports 10, 20, 30, and 40 MHz channels, allowing warehouse managers to optimize bandwidth allocation based on deployment topology and interference conditions.

The UDM-SE operates reliably in temperatures ranging from -10 to 45°C (14 to 113°F) and humidity levels between 10 to 90% noncondensing. These environmental specifications ensure stable performance in typical indoor networking environments.

The USW-ENTERPRISE48POE operates reliably in temperatures from -5 to 40°C (23 to 104°F) with humidity levels from 5 to 95% noncondensing. These environmental specifications make it suitable for typical warehouse and indoor networking environments.

The USP-PDU-Pro carries CE, FCC, and IC certifications, confirming compliance with electrical safety and electromagnetic compatibility standards in North America and Europe. These certifications ensure the device meets required regulatory requirements for deployment in professional environments.

The R5AC-Lite provides the strongest WPA2 AES security encryption to protect your wireless network. It runs on airOS 8, Ubiquiti's revolutionary operating system, which includes comprehensive security features and diagnostic tools for enterprise-grade network management.

The PBE-M5-400 includes a pole-mount kit and features innovative mechanical design with built-in tilt capability offering 20° of uptilt and up to 20° of downtilt. The antenna feed detaches with a push button for easy removal, and the mounting bracket design simplifies assembly and installation.

This transceiver module is designed for single-mode optical fiber, which provides superior distance and performance characteristics compared to multi-mode fiber. Single-mode fiber is the preferred choice for long-distance 10 Gigabit Ethernet links in enterprise and data center environments.

Yes, the PBE-M5-400 can be managed through Ubiquiti's centralized management system, which allows operators to monitor device status, perform mass firmware upgrades, access the web UI, manage groups of devices, and schedule tasks across your entire network. Contact us today to discuss deployment options available from Barcodes Inc.

The connector carries CE, FCC, and IC certifications, ensuring compliance with international electromagnetic compatibility and safety standards. These certifications confirm that the product meets regulatory requirements for use in professional network installations across multiple regions.

The R5AC-Lite is designed to pair with airMAX ac antennas for optimal performance. For point-to-point backhaul links, it works with the RocketDish ac antenna, while point-to-multipoint deployments use the airMAX ac Sector antenna. Contact us today to find the right antenna configuration for your deployment.

Yes, the USP-PDU-Pro includes a network RJ-45 connection that enables remote management and monitoring capabilities. This network connectivity allows integration with data center management platforms for centralized power control and monitoring across your infrastructure. Contact us today to discuss integration options with your existing network management setup.

The UDM-SE has been certified by CE, FCC, and IC, confirming compliance with international electromagnetic compatibility and safety standards. These certifications ensure the device meets regulatory requirements for deployment across multiple regions.

The USW-ENTERPRISE48POE meets CE, FCC, and IC certifications, ensuring compliance with international standards for electromagnetic compatibility and safety. Contact us today to verify certification requirements for your specific deployment region.

The PS-5AC-US includes built-in utilities such as antenna alignment tools, discovery utilities, site survey capabilities, ping, traceroute, and speed test functions. It also provides statistical reporting for uptime, packet errors, data rates, wireless distance, and Ethernet link rate, along with remote reset support and software-adjustable power settings via web server, SNMP, and CLI interfaces.