- IEEE 802.11i
- IEEE 802.1x
- Wi-Fi Protected Access (WPA)
- WPA2
- EAP
- Temporal Key Integrity Protocol (TKIP)
- Advanced Encryption Standard (AES)
- RC4 encryption
- Intrusion Detection System or Intrusion Prevention System (IDS/IPS)
- LEAP
- Message Integrity Check (MIC)
- Protected EAP-Generic Token Card (PEAP-GTC)
- PEAP-Microsoft Challenge Authentication Protocol Version 2 (MSCHAPv2)
- EAP Message Digest 5 (EAP MD5)
- EAP-Transport Layer Security (EAP-TLS)
- EAP-Tunneled TLS (EAP-TTLS)
- EAP-Subscriber Identity Module (EAP-SIM)
- EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
The Cisco Aironet AIR-LAP1310G Outdoor Access Point or Bridge is an 802.11g access point and bridge that provides high-speed and cost-effective wireless connectivity between multiple fixed or mobile networks and clients. Building a metropolitan-area wireless infrastructure with the Cisco Aironet AIR-LAP1310G Outdoor Access Point or Bridge provides deployment personnel with a flexible, easy-to-use solution that meets the security requirements of wide-area networking professionals.
- Telnet
- FTP
- Simple Network Management Protocol (SNMP) Versions 1 and 2
- Aironet AIR-LAP1310G Outdoor Access Point/Bridge
- Power injector (LR2) unit
- Power module and AC power cord
- Quick start guide
- Mounting instructions document
- Read Me document
- Translated safety warnings document
- Cisco product registration and Cisco documentation feedback cards
When configured with LWAPP, the Cisco Aironet 1300 Series can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information with no hands-on intervention.
- Wi-Fi
- UL 60950 third edition
- CSA C22.2 No. 60950-00
- IEC 60950 Sec Ed
- EN 60950; 1992
- CSA 94/UL50-NEMA rated
- FCC Part 15.247
- RSS-139-1, RSS-210
- EN 300.328
- Telec 33B
- ARIB-STD-T66 v2.1
- FCC Bulletin OET-65CRSS-102
- FCC Part 15.107 and 15.109 Class B
- ICES-003 Class B (Canada)
- EN 55022 Class B
- EN 55024
- AS/NZS 3548 Class B
- VCCI Class B
- EN 301.489-1 and 17