Barcode Label Rewinder Accessories

Sato External Universal Power Supply for RWG500

LABEL DISPENSER/COUNTER FOR OPAQUE LABELS. MAX 4.5" WIDE X 8.5" DIA X 7.85" LENGTH, SOFTKEY CONTROL PANEL, ADJ SENSOR POSITION, AUTO CALIB/WEB TENSION CONTROL

Tensioning Shaft Assembly for supply roll of labels (3ö diameter cores). Provides web tension control.

Set of Core Adapters for 6ö diameter Cores. Can be used only on Rewinders with a ôQuick-Chuckö Core Holder.

Inspection Bracket with Rollers for up to 6ö (152-mm) wide labels.

Inspection Bracket with Rollers for up to 10ö (254-mm) wide labels.

Set of two Aluminum Guide Flanges for use with narrow labels. Cannot be used with TSN, LD-6.

Digital Preset Counter (factory installed). Only for opaque labels with a gap.

Low-Torque Option. Creates a low torque range below standard threshold. Factory-installed only.

16ö diameter Outer Guide Flange. For use with Mechanical ôQuick-Chuckö Core Holder.

Pedal that starts or stops the Rewinder when pressed and held.

Digital Preset Counter with scaling feature for multi-up labels (factory installed). For opaque labels with a gap.

Outer Guide Flange for use with MC-10A. Assists in maintaining an even roll edge.

Inspection Bracket with Rollers for up to 8ö (203-mm) wide labels.

Set of three (3) steel Fins plus hardware for unwind Shaft. Enables the unwind shaft to handle 6ö diameter cores.

High-Torque Option. Increases maximum torque 25% and doubles maximum speed. Factory-installed only.

Dual-Spindle Rewind Station that provides an easy solution KEY FEATURES for wind-in/wind-out, label reversing & inspection applications.

Adjustable Paper Guide, used primarily with the CAT-3-ACH Rewinder. Maintains flush outer roll edge.

Adjustable Paper Guide for use with MC-10A or MC-11. Assists in maintaining an even roll edge.

Digital Preset Counter for opaque labels with a gap.*