Features - Sealable Sub Menus
Programmable auto-power off time, backlight working mode (LCD version) and adjustable LED brightness (LED Version)
Available check weighing mode, programmable hold function with peak and average capabilities
Battery voltage display and charging indicator
Programmable Serial Output
Four Point Calibration
One hardware low pass filter and 2 programmable digital low pass filters
Fine Tune Weight Adjustment
Test menus to test display, keyboard Misc menu to display ADC, Firmware Version and Com2 interface type
Adjustable desktop stand for easy viewing angle - Power: Input 100 - 240VAC, 50 - 60Hz internal mounted power supply with output of 12VDC at 2 amps and 4 AH internal battery with built-in battery charging circuit
Peak Capture Rate: 80Hz
Display:
Seven digit, seven segment, 17 mm / 0.7" LED Six digit, 25 mm / 1" LCD
Max Display Range: -999,999 to 999,999
Keypad:
6 Push Buttons: hold/setup, print/func, n-g/total, unit/data, tare/preset, zero/on-off
Available Unit of Measure: kg, lb, lb:oz, PCS, % Load Cell Excitation:
Voltage: 5 VDC, Max. Current: 120mA, can power 8 @ 350 ohm loadcells,
Max Sensitivity: -3 mV/V to +3 mV/V
Analog Circuit:
24-bit A/D converter
Division Number Range: 100-100,000 - Communication:
Serial Port1: Full-duplex RS-232
Serial Port2: Full-duplex RS-232 or half-duplex RS-485
Baud Rate: Selectable: 1200-2400-4800-9600-19200-38400-57600 bps
Data Output Format: 8N1, 7O1, 7E1
Protocol: Programmable
Print Format: Selectable Gross Weight, Tare, Net, Time/Date, Scale ID, Percent, Count, Piece Weight, Total
Real Clock: Built-in nonvolatile real time & date
Approximate Battery Life: LCD: 48 hrs*; LED: 30 hrs
Battery life will vary depending on number and type of load cells used, duration of backlight, temperature, and other factors
Operating Temperture:
-10° C to 40° C / 14° F to 104° F
Indicator Dimension:
89 mm (L) x 267 mm (W) x 216 mm (H)
3.5" L x 10.5" W x 8.5" H
Full specifications (PDF)
