When connected to the panel's option bus, theFPP-RNAC-8A-4C adds four additional NACs to the firepanel. The additional NACs can be NFPA 72, Class B orClass A.
When connected directly to the NAC output, theFPP-RNAC-8A-4C is a NAC power supply forfire-protective signaling systems. The regulated powersupply provides up to 8 A of power used to operateboth continuous and intermittent loads. This 8 A ofpower can be distributed through the four outputcircuits and auxiliary power circuit. TheFPP-RNAC-8A-4C power supply is UL Listed for use incommercial fire alarm applications.
1 x Lock set with two #1358 (D102) keys (P/N:F01U083084)
4 x 2.21 kΩ end-of-line (EOL) resistors (P/N: F01U034504) For retrofitting applications, allowable EOL values are inthe range of 1 kΩ to 20 kΩ
1 x Hardware pack (3 Cables (1 red and 1 black [14 AWG, 610 mm], 1 black [14 AWG, 153 mm]) 1 Grounding wire (green, 10 in.) with nut, 3 x Hex nuts with lock washers, 7 x standoffs and screws (mounting))
1 x Literature (Installation manual Electronic document downloads (EDD)Release Notes)
The Bosch FPP-RNAC-8A-4C Products is also known as
BOS-FPPRNAC8A4C
IMPORTANT UPDATE: Due to memory chip industry demands, manufacturers are signaling price increases and supply constraints. Contact us now to secure inventory and pricing.IMPORTANT UPDATE: Due to memory chip industry demands, manufacturers are signaling price increases and supply constraints. Contact us now to secure inventory and pricing.
