Bogen TAMB Public Address Equipment
Bogen TAMB Public Address Equipment Model Overview
Key features:
- Compatible with loop start, ground start, and station port operations
- Adjustable tone volume and pre-announce confirmation tones
- Supports one-way and two-way zones
- Background music input with volume control
- Dynamic station access disconnect management
- Wall-mountable with easy-access controls
Specifications:
- Ringer Equivalence: 1.2B
- Station Port Compatibility: Two-wire ring start
- Trunk Port Compatibility: Two-wire loop start or ground start
- Input/Output Impedance: 600-ohms, nominal
- Power Requirements: 24V DC @ 90 mA or 48V DC @ 105 mA
- Operating Temperature Range: 32° - 120°F
- Dimensions: 8-1/8" W x 4-1/2" H x 1-7/8" D
- Shipping Weight: 2 lb.
The TAMB interfaces a telephone system with a paging system allowing announcements to be made through any telephone. Any of three types of analog ports can be connected using the TAMB: loop start trunk, ground start trunk, and station port (90V ring up). This wide range of port compatibility makes the TAMB indispensable for any telephone paging application because it eliminates the possibility of mismatching paging interfaces and port types.
- Built-in pre-announce tone produced over paging system before announcement (defeatable)
- Calling Party Control (CPC) signal from switch immediately disconnects station port
- Built-in confirmation tone indicating access to paging system (defeatable)
- Loop start, ground start, and station port (90V ring up) compatibility
- Silence interval timer is adjustable from 2 to 6 seconds of silence
- Disconnect timer is adjustable from 6 to 35 seconds (defeatable)
- Works with one-way and two-way (talk back) zones
- No power supply needed for station port interfacing
- Suppresses background music during paging
- Background music input with volume control
- Adjustable tone volume
- 600-ohm output
Printer Expert!