Bixolon SRP-350IIP Receipt Printer

The Ubiquiti Networks USW-48-POE features 48 10/100/1000 Mbps RJ45 Ethernet ports with PoE+ support. Each port supports IEEE 802.3af/at with a maximum of 34.2W per port, and the switch provides a total PoE budget of 195W, making it ideal for powering IP cameras, wireless access points, and other PoE-compatible devices throughout your facility.

The Ubiquiti POE-24-30W-G-WH is a 24V DC Power over Ethernet injector designed to deliver passive PoE power to compatible network devices. This injector provides 24VDC output and is ideal for powering Ubiquiti access points and other devices that support 24V passive PoE connectivity.

The NHD-COVER-FABRIC-3 is a 3-pack of fabric design upgradable casings for the nanoHD access point. These covers provide a customizable aesthetic option for your wireless access point deployment while maintaining compatibility with the nanoHD hardware.

The NHD-COVER-CONCRETE-3 is a concrete skin cover designed specifically for Ubiquiti wireless access points. It provides protective covering for outdoor access point installations in concrete environments. We offer this accessory to help extend the lifespan of your Ubiquiti access point hardware in harsh outdoor conditions.

The NHD-COVER-MARBLE-3 is a 3-pack of design upgradable casings in marble finish for the nanoHD access point. This allows you to customize the appearance of your Ubiquiti nanoHD wireless access points while maintaining full functionality.

The USW-48-POE delivers 140 Gbps switching capacity with a total non-blocking throughput of 70 Gbps and a forwarding rate of 104.16 Mpps. This ensures simultaneous processing of traffic across all ports at line rate without packet loss, providing robust performance for growing network environments.

Yes, Ubiquiti radio devices must be professionally installed. Additionally, shielded ethernet cable and earth grounding must be used as conditions of product warranty. It is the installer's responsibility to follow local country regulations including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

Yes, Ubiquiti radio devices must be professionally installed as a condition of product warranty. The installer is responsible for following local country regulations, including operation within legal frequency channels, output power requirements, and Dynamic Frequency Selection (DFS) requirements. Contact us today if you need guidance on professional installation services.

No, the POE-24-30W-G-WH is a 24V DC passive PoE injector and is not compatible with standard PoE+ (IEEE 802.3at) devices that require 50–57V. This injector is specifically designed for Ubiquiti devices and other equipment that support 24V passive PoE on pins 4, 5+, 7, and 8-.

The nanoHD access point that uses these covers is compatible with UniFi switches including the US-8, US-8-60W, US-8-150W, US-16-150W, US-24-250W, US-24-500W, US-48-500W, and US-48-750W models. This ensures seamless integration into your existing UniFi network infrastructure.

Yes, the USW-48-POE is fully rack-mountable in a 1U form factor and measures 443 x 43 x 286 mm. It can be deployed in standard 19-inch equipment racks and includes rack-mount brackets, making it ideal for warehouse, logistics, and IT infrastructure installations where space efficiency is critical.

The nanoHD access points support wall and ceiling mounting with included kits. The mounting hardware is designed to accommodate both indoor and outdoor deployment scenarios for flexible network architecture.

The Ubiquiti POE-24-30W-G-WH operates reliably in temperatures from -20 to 60°C (-4 to 140°F) and can be safely stored in environments ranging from -30 to 70°C (-22 to 158°F). This temperature range makes it suitable for both indoor and moderately challenging deployment environments.

Shielded ethernet cable and earth grounding must be used as conditions of product warranty when installing Ubiquiti access points. This is especially important in outdoor installations where the concrete cover is used. We recommend consulting with your professional installer to ensure proper cable selection and grounding.

Ubiquiti requires that radio devices using these covers must be professionally installed, with shielded ethernet cable and earth grounding used as conditions of product warranty. It is the installer's responsibility to follow local country regulations including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

The NHD-COVER-CONCRETE-3 is specifically designed as a concrete skin for access points. To ensure compatibility with your specific Ubiquiti model, we recommend verifying the exact access point model you're using. Contact us today and our team can confirm compatibility and help you select the right protective cover for your deployment.

The POE-24-30W-G-WH accepts rated input voltage of 100-240VAC with a maximum input current of 1.5A, making it compatible with standard wall outlets worldwide. The injector delivers greater than 86% efficiency and maintains output ripple of 200mVpp with line regulation less than 1%.

The USW-48-POE includes two 1/10 Gbps SFP+ Ethernet ports and two 1 Gbps SFP Ethernet ports for fiber uplinks and network expansion. These ports enable high-speed connectivity to other switches or core network infrastructure without consuming the 48 standard Gigabit ports.

The NHD-COVER-MARBLE-3 is specifically designed as an upgradable casing for the nanoHD access point. For compatibility with other Ubiquiti access point models, contact us today at barcodesinc.com to verify which covers are compatible with your specific equipment.

Yes, the NHD-COVER-FABRIC-3 is specifically designed as an upgradable casing for the nanoHD access point, allowing you to refresh the appearance of your existing deployment without replacing the underlying hardware.

The concrete cover is designed for outdoor environments where Ubiquiti access points operate. Ubiquiti access points are built to operate in temperatures ranging from -30 to 75°C (-22 to 167°F) and humidity levels from 5 to 95% noncondensing. The concrete skin provides additional protection in harsh outdoor installations.

Ubiquiti nanoHD access points operate in temperature ranges from -10 to 70°C (14 to 158°F) and humidity levels from 5 to 95% noncondensing. These environmental specifications make the equipment suitable for most indoor and protected outdoor installations.

The Ubiquiti POE-24-30W-G-WH is a single-port PoE injector designed to power one device at a time through passive 24V PoE delivery. For powering multiple devices, you would need to deploy multiple injectors or use a managed PoE switch with integrated power delivery capabilities.

The product is sold with a limited warranty as described at www.ubnt.com/support/warranty. Proper professional installation with shielded ethernet cable and earth grounding is required as a condition of the product warranty.

The USW-48-POE operates reliably in environments with temperatures ranging from -5 to 40°C (23 to 104°F) and humidity levels of 5 to 95% noncondensing. It meets ETSI300-019-1.4 standards for shock and vibration resistance and is certified by CE, FCC, and IC for global deployment.

Complete specifications and warranty information for Ubiquiti products are available at www.ubnt.com. All Ubiquiti products are sold with a limited warranty as described on their support site. For assistance selecting the right protective cover and access point configuration for your needs, visit barcodesinc.com or contact us today.

Yes, Ubiquiti products are sold with a limited warranty. For specific warranty details and coverage terms, visit www.ubnt.com/support/warranty or contact us today at barcodesinc.com for complete warranty information on your purchase.

The POE-24-30W-G-WH operates in humidity levels from 5 to 90% noncondensing and features 4kV surge immunity for both differential and common mode protection. These specifications ensure reliable operation in standard office and warehouse environments while protecting against electrical transients.

We offer the Ubiquiti Networks NHD-COVER-FABRIC-3 as part of our comprehensive AIDC product lineup. Contact us today or visit barcodesinc.com to place your order and speak with our team about your wireless access point needs.

The USW-48-POE is a fully managed Layer 2 switch with both out-of-band serial management and in-band Ethernet management via a dedicated RJ45 serial port. It supports up to 255 VLANs, 6 link aggregations, and 1 monitoring session, providing enterprise-grade network control and visibility for warehouse and logistics operations.