What is the Cisco PWR-RGD-LOW-DC-H power supply used for?
The Cisco PWR-RGD-LOW-DC-H is a Hazloc-certified low DC power supply designed for the IE 5000 industrial Ethernet switch. This spare power supply unit supports DC input voltage of 24-60V at 10A output, making it ideal for hazardous location deployments where explosion-proof equipment is required. We offer this accessory to ensure your critical industrial networking infrastructure maintains continuous operation.
What is the maximum transmission distance for the Cisco QSFP-100G-LR4-S transceiver?
The Cisco QSFP-100G-LR4-S is a 100GBASE LR4 transceiver designed for long-range transmission over single-mode fiber, supporting distances up to 10 kilometers. This makes it ideal for campus and metropolitan area network deployments where extended reach is required. We offer this transceiver module as part of our comprehensive Cisco networking components catalog.
What is the Cisco PWR-C3-750WDC-F power supply used for?
The Cisco PWR-C3-750WDC-F is a 750W DC power supply designed for Cisco Catalyst 3000 Series switches and routers that require DC power input. This modular power supply supports redundancy configurations and helps ensure uninterrupted operation for converged data, voice, and video networks. We offer this accessory as part of our comprehensive Cisco networking components lineup.
What is the maximum transmission distance for the Cisco QSFP-100G-SR4-S transceiver?
The Cisco QSFP-100G-SR4-S is a 100GBASE-SR4 transceiver designed for short-range optical connections with a maximum distance of 100 meters over multi-mode optical fiber. This makes it ideal for intra-datacenter and campus network deployments where high-speed connectivity over shorter distances is required. We offer this transceiver module as part of our comprehensive Cisco networking components catalog.
What is the Cisco QSFP-100G-PSM4-S transceiver used for?
The Cisco QSFP-100G-PSM4-S is a 100GBASE PSM4 QSFP transceiver module designed for high-speed optical network connectivity. This hot-swappable module supports 100 Gigabit Ethernet data rates and uses MPO connectors for parallel single-mode fiber connections, making it ideal for data center and enterprise network deployments requiring long-distance, high-bandwidth connectivity.
What is the power output and input specification for the Cisco PWR-IE480W-PCAC-L power supply?
The Cisco PWR-IE480W-PCAC-L is a 480W AC to DC power supply rated for AC input of 100-240V at 5.0A with 50-60Hz frequency. This power supply is designed to support Cisco Catalyst IE3400 Rugged Series switches and provides sufficient power budget for both switch operation and Power over Ethernet (PoE) ports, provided the total system power consumption remains within the 480W rating.
What is the power rating and PoE budget for the Cisco PWR-RGD-AC-DC-250?
The Cisco PWR-RGD-AC-DC-250 is a 250W power supply unit designed for high-density PoE applications on edge platforms like the IE4010 and IE5000 series. This PSU delivers 250W maximum power rating with full 250W PoE budget capability, making it ideal for powering multiple networked devices requiring substantial power delivery.
What are the key specifications of the QSFP-100G-PSM4-S transceiver?
The QSFP-100G-PSM4-S delivers 100 Gigabit Ethernet performance with PSM4 (Parallel Single-Mode) technology and features MPO-12 connectors for multi-lane fiber transmission. It is designed as a hot-swappable plug-in module compatible with Cisco networking equipment that supports QSFP form factor transceivers, providing investment protection for modern data networking infrastructure.
What are the power specifications for the PWR-C3-750WDC-F?
The PWR-C3-750WDC-F delivers 750W of DC power with an input voltage range of -40 to -72V DC. It features a terminal block connection for DC input and provides 55V output at 13.25A plus 5V at 0.3A for auxiliary systems. The power supply includes a 2ms minimum output holdup time at -40 VDC to maintain system stability during power transitions.
What type of fiber and connector does the QSFP-100G-LR4-S use?
The Cisco QSFP-100G-LR4-S utilizes single-mode optical fiber with LC duplex connectors for reliable long-distance connectivity. The LC duplex interface is hot-swappable, allowing for field replacement without powering down your equipment. Contact us today for availability and technical specifications on this connector type.
What type of connector does the QSFP-100G-SR4-S use?
The Cisco QSFP-100G-SR4-S features an MPO (Multi-fiber Push-On) connector, which is the standard interface for high-density 100 Gigabit Ethernet applications. The MPO connector enables efficient cable management and supports the four-lane architecture required for 100GBASE-SR4 transmission. Contact us today to verify compatibility with your existing network infrastructure.
Is the PWR-RGD-LOW-DC-H compatible with my Cisco equipment?
The PWR-RGD-LOW-DC-H is specifically designed for the Cisco IE 5000 Series industrial switches. Before ordering, verify your device model and power requirements match this unit's 24-60V DC input specification. Contact us today to confirm compatibility with your specific Cisco equipment or to explore alternative power supply options available from us.
Is the Cisco PWR-IE480W-PCAC-L compatible with PoE and PoE+ devices?
Yes, the Cisco PWR-IE480W-PCAC-L supports PoE and PoE+ functionality. However, the entire power budget for both the switch and all PoE ports must stay within the 480W power supply wattage limit. We recommend reviewing your specific switch model's power consumption requirements to ensure adequate headroom for all connected devices.
What input voltage and frequency does this Cisco power supply support?
The PWR-RGD-AC-DC-250 supports worldwide AC input ranging from 100 to 240 VAC at 50–60 Hz frequency, allowing deployment across global locations without voltage conversion. This universal input range ensures compatibility with standard power infrastructure in data centers, warehouses, and edge computing environments.
What are the environmental and safety ratings for this Cisco power supply?
The Cisco PWR-IE480W-PCAC-L is rated as IP20, meaning it is suitable for indoor use in controlled environments. This power supply is not certified for smart grid applications or hazardous locations, making it ideal for standard enterprise network deployments in offices, data centers, and secure facilities.
Is the Cisco QSFP-100G-LR4-S compatible with Cisco 1000 Series routers?
Yes, the Cisco QSFP-100G-LR4-S transceiver module is designed for use with Cisco's 1000 Series routers and other compatible data networking equipment that supports QSFP form factor modules. The hot-swappable design allows for easy installation and replacement in supported chassis. Visit barcodesinc.com or contact us today to verify compatibility with your specific router model.
Is the Cisco QSFP-100G-SR4-S hot-swappable?
Yes, the Cisco QSFP-100G-SR4-S is a hot-swappable transceiver module, allowing you to install, remove, or replace it without powering down your network equipment. This feature minimizes downtime during maintenance and upgrades in production environments. We stock this module to support your network infrastructure needs.
How does the PSM4 technology differ from other 100G transceiver types?
PSM4 (Parallel Single-Mode) technology uses four separate single-mode fiber pairs for 100G transmission, offering longer reach distances compared to multi-mode alternatives like SR4 modules. This makes PSM4 transceivers like the QSFP-100G-PSM4-S ideal for longer-distance optical links while maintaining the same 100 Gigabit Ethernet performance, providing flexibility for various network topology requirements.
What does Hazloc certification mean for this power supply?
Hazloc (Hazardous Location) certification means this power supply meets strict safety standards for use in environments with potentially explosive atmospheres, such as chemical plants, refineries, and mining operations. The PWR-RGD-LOW-DC-H is engineered to prevent ignition sources and contain any internal explosions, making it compliant with regulations for Class I, Division 1 hazardous locations. This certification ensures your industrial network operates safely in the most demanding environments.
Is the PWR-C3-750WDC-F compatible with AC power supplies?
No, the PWR-C3-750WDC-F is specifically a DC power supply and cannot be directly swapped with AC models like the C3K-PWR-750WAC. However, Cisco's modular power supply architecture allows you to configure systems with either AC or DC supplies depending on your facility's power infrastructure. Contact us today to determine the right power supply configuration for your network deployment.
Is the Cisco PWR-RGD-AC-DC-250 suitable for redundant power configurations?
Yes, this 250W power supply is designed to work in redundant power system configurations, providing failover protection and increased availability for critical network infrastructure. We offer this accessory as part of comprehensive power solutions for organizations requiring uninterrupted operation and protection against single points of failure.
What fiber type does the QSFP-100G-SR4-S require?
The Cisco QSFP-100G-SR4-S operates over multi-mode optical fiber, which is suitable for shorter-distance, high-bandwidth applications typical in data centers and enterprise networks. Multi-mode fiber is generally more cost-effective than single-mode fiber for distances up to 100 meters. Visit barcodesinc.com to explore our full range of 100G transceiver options for different distance requirements.
Which Cisco switch models are compatible with the PWR-IE480W-PCAC-L power supply?
The Cisco PWR-IE480W-PCAC-L is designed for use with Cisco Catalyst IE3400 Rugged Series switches. This 480W power supply option provides the higher power capacity needed for switches requiring greater PoE power delivery or supporting more active ports than smaller power supply options like the 240W variant.
What are the key differences between LR4, SR4, and ZR4 QSFP transceivers?
LR4 transceivers like the QSFP-100G-LR4-S support 10km transmission over single-mode fiber, SR4 modules support shorter distances (typically under 500m) over multi-mode fiber, and ZR4 modules extend range to 80km over single-mode fiber for ultra-long-distance deployments. The choice depends on your network topology and distance requirements. We offer all three variants—contact us today to determine the right transceiver for your infrastructure.
What is the physical size and weight of this Cisco power supply?
The PWR-C3-750WDC-F measures 1.75 x 17.5 x 17.15 inches (4.5 x 44.5 x 43.6 cm) and weighs 10.8 lb (4.9 kg). It is designed as a 1 RU (Rack Unit) component that fits standard 19-inch rack installations used in data centers and network closets. This compact form factor allows for efficient space utilization in your infrastructure.
What are the output specifications for the PWR-RGD-AC-DC-250?
The power supply provides 12V output at 21A capacity with a 20ms output holdup time at 100 VAC, ensuring stable power delivery during brief input fluctuations. It features an IEC 320 C14 input receptacle and is rated for 5A power cord specifications, meeting enterprise-grade power delivery standards.
What networking equipment is compatible with the QSFP-100G-PSM4-S?
The QSFP-100G-PSM4-S is compatible with Cisco networking devices that feature QSFP ports supporting 100GBASE transceiver modules. We offer this module for integration into Cisco routers, switches, and other telecommunications equipment with compatible QSFP+ or QSFP28 port configurations—contact us today to verify compatibility with your specific network infrastructure.
What are the power specifications for the PWR-RGD-LOW-DC-H?
The PWR-RGD-LOW-DC-H provides a low DC power input range of 24-60V with a maximum output of 10A. This spare power supply unit is designed to deliver reliable, consistent power to the IE 5000 industrial switch in DC-powered environments. For detailed technical specifications or to verify compatibility with your power infrastructure, visit barcodesinc.com or contact us today.
Is the QSFP-100G-PSM4-S hot-swappable and field-replaceable?
Yes, the QSFP-100G-PSM4-S is a hot-swappable module that can be inserted or removed from compatible Cisco equipment without powering down the system. This design enables field replacement and network upgrades with minimal downtime, making it practical for production environments where continuous operation is critical.
How does the 480W power supply compare to other Cisco IE power supply options?
The PWR-IE480W-PCAC-L is the highest-capacity AC power supply in the Cisco IE industrial switch lineup, offering double the power of the 240W variant (PWR-IE240W-PCAC-L=). This makes it ideal for deployments requiring maximum PoE power delivery or supporting the full port count of larger Catalyst IE3400 chassis with multiple line cards.
Does the PWR-C3-750WDC-F support redundancy?
Yes, the PWR-C3-750WDC-F is part of Cisco's modular power supply system that supports redundant power configurations. When paired with the Cisco RPS 2300 Redundant Power System, it provides seamless failover protection and ensures continuous operation even if one power supply fails. This redundancy is critical for mission-critical network environments requiring high availability.
Can I use QSFP-100G and QSFP-40G modules interchangeably in the same port?
No, QSFP-100G and QSFP-40G modules are not interchangeable, as they operate at different speeds and require compatible port hardware. The QSFP-100G-LR4-S delivers 100 Gigabit Ethernet performance, while 40G modules like the QSFP-40G-LR4-S-RF provide 40 Gigabit speeds. Your equipment must support the specific speed and form factor of the transceiver you install. Contact us today to ensure you select the correct module for your network requirements.
What equipment is compatible with the Cisco PWR-RGD-AC-DC-250?
This 250W PSU is specifically designed for Cisco IE4010 and IE5000 industrial edge platforms, providing the necessary power and PoE budget for these high-performance edge routers. Contact us today to verify compatibility with your specific Cisco equipment configuration and ensure proper integration.
Why would I need a spare PWR-RGD-LOW-DC-H power supply?
In mission-critical industrial environments, having spare power supplies on hand minimizes downtime from hardware failures. The PWR-RGD-LOW-DC-H= (spare unit designation) ensures you can quickly replace a failed power supply without waiting for shipment, maintaining continuous operation of your IE 5000 switch. We recommend keeping spares available for all critical network infrastructure, especially in hazardous locations where equipment replacement is more complex.
How does the SR4 model compare to the LR4 and ZR4 variants?
The SR4 (100 meters) is optimized for short-range datacenter connectivity, while the LR4 (10 kilometers) and ZR4 (80 kilometers) variants support progressively longer distances over single-mode fiber for metropolitan and wide-area network applications. The choice depends on your network topology and distance requirements. We offer all three variants to support diverse deployment scenarios.
What is the efficiency rating of this Cisco power supply?
The PWR-RGD-AC-DC-250 achieves 80 Plus Silver efficiency certification, delivering excellent power conversion efficiency while minimizing heat generation and operational costs. This certification ensures reliable performance in demanding warehouse and logistics environments where thermal management is critical.
What warranty coverage does the PWR-RGD-LOW-DC-H include?
Cisco provides a five-year limited hardware warranty on all IE 5000 power supplies, including the PWR-RGD-LOW-DC-H. This comprehensive warranty covers defects in materials and workmanship, giving you peace of mind for your industrial network investment. Visit barcodesinc.com or contact us today for complete warranty details and support options available from our team.
What wavelengths does the Cisco QSFP-100G-LR4-S operate on?
The Cisco QSFP-100G-LR4-S operates as a 100GBase-LR4 module using multiple wavelengths optimized for long-range single-mode fiber transmission. For detailed wavelength specifications and technical documentation, we recommend contacting our team at barcodesinc.com, where our networking specialists can provide complete optical specifications for your deployment planning.
Where can I purchase the Cisco QSFP-100G-PSM4-S transceiver?
We offer the Cisco QSFP-100G-PSM4-S and other high-speed transceiver modules for data networking applications. Visit barcodesinc.com to check availability, pricing, and specifications, or contact us today for bulk orders, technical guidance, and integration support for your optical network infrastructure.
What warranty coverage is included with the PWR-C3-750WDC-F?
The Cisco PWR-C3-750WDC-F includes Cisco's Limited Lifetime Warranty, which provides long-term protection for your investment. This warranty covers defects in materials and workmanship for the operational life of the product. Visit barcodesinc.com or contact us today for complete warranty details and support options available from our team.
What is the data rate and Ethernet standard for this QSFP transceiver?
The Cisco QSFP-100G-SR4-S delivers 100 Gigabit Ethernet speeds and complies with the 100GBASE-SR4 standard, enabling ultra-high-speed data transmission for bandwidth-intensive applications. This standard utilizes four parallel optical lanes to achieve the 100 Gbps throughput. Contact us today for integration guidance and compatibility verification with your Cisco network equipment.
Where can I purchase the Cisco PWR-IE480W-PCAC-L power supply?
We offer the Cisco PWR-IE480W-PCAC-L and a full range of Cisco power supplies and networking accessories. Visit barcodesinc.com to check availability and pricing, or contact us today for volume quotes, technical specifications, and compatibility verification for your specific deployment.
