APG VP320-BG1416 Cash Drawer

It offers up to 18 ips at 203 dpi, 14 ips at 300 dpi, and 6 ips at 600 dpi, making it one of the fastest 4-inch print engines available.

The Zebra RFD40 Sled uses a quick-release PowerPrecision+ 7,000 mAh Li-Ion battery that can be swapped without removing the mobile computer from the sled. An optional Battery Locking Foot secures the battery in place to help prevent damage or theft.

Charging cradle cups carry two sets of charging pins, so a single cradle can charge the sled alone, the mobile computer alone, or both while attached. Cradles come in 1-slot and multi-slot, charge-only and communication variants — 1-slot communication cradles use micro USB to a host PC, while multi-slot cradles include an Ethernet port for pushing configuration and firmware and pulling device health data over the network. A 4-slot battery toaster and USB-C cable and wall brick are also available.

Yes. When a real-time connection to backend systems is not available, the Zebra RFD40 Sled runs in batch mode and stores up to 40,000 RFID tag reads locally. Workers sync the sled later to upload the collected data to the host device.

The sled can also operate independently of a Zebra mobile computer: a USB-C port and pinned connector on the bottom let it run as a tethered RFID reader connected to a Windows PC or other host via a USB-C cable or cable cup. That same connection runs 123RFID Desktop for live and offline configuration, proofs of concept, demos and firmware upgrades.

The Zebra RFD40 Sled is specified for multiple 5 ft. (1.5 m) drops to concrete and 500 tumble cycles (1,000 drops from 1.6 ft. / 0.5 m) at room temperature. It carries IP54 sealing for dust and water protection and withstands ±15 kV air discharge and ±8 kV direct electrostatic discharge.

Its operating temperature range is 14° F to 122° F (-10° C to +50° C) at 5–85% non-condensing humidity, with storage from -40° F to 158° F (-40° C to +70° C). IP54 covers dust and splashing water, so the RFD40 suits retail floors, backrooms and healthcare settings, but it is not rated for the directed water jets an IP65 device withstands.

The Zebra RFD40 Standard Sled reads 1,300+ RFID tags per second — which Zebra states is up to 30% faster than the next leading competitor — at a nominal read range of approximately 19.7+ ft. (6+ m). It supports the EPC Class 1 Gen 2 and EPC Gen2 V2 standards using Zebra proprietary radio technology, and includes an ultra-accurate item-finder mode for locating a specific tagged asset.

RF output is 0–30 dBm EIRP across regions: 902–928 MHz in the US, 865–868 MHz in the EU, and 916–921 MHz with listen-before-talk in Japan. A tri-function programmable trigger switches between RFID reading, barcode scanning and a third function of your choice, such as enter or push-to-talk.

The Zebra RFD40 Sled connects to eConnex-enabled Zebra mobile computers through an electronic 8-pin connection that supports snap-and-go pairing. Supported devices include the Zebra TC21 and TC26, the EC50 and EC55, and future eConnex-enabled models, including WWAN-enabled variants.

Compatibility is handled by tool-free eConnex adaptors, so an associate can swap the adaptor to fit a different mobile computer in seconds without sending the device to IT for retrofitting. The sled also connects to Windows-based PCs over USB-C.

The Zebra RFD40 UHF RFID Standard Sled is a handheld RAIN RFID reader that attaches to a Zebra mobile computer, adding UHF RFID reading and item-finding to a device your workers already carry. It weighs approximately 19.1 oz. (541 g) with battery and measures 5.94 in. H x 3.3 in. W x 6.5 in. L (15.1 x 8.4 x 16.65 cm).

It is used for cycle counting, item finding, planogram compliance, returns and BOPIS in retail; check-in, ticketing, loyalty cards and food traceability in hospitality; and specimen, patient, staff and asset tracking in healthcare.

With fanless, all-metal construction, debris resistance, and IP-rated components, the ZE521 thrives in dusty, wet, or demanding settings.

It supports media widths from 3" to 7.1" and works with continuous, die-cut, or black mark labels.

The ZE521 prints at 14 ips at 203 dpi and 12 ips at 300 dpi, ideal for high-volume industrial applications.

The ZE511 supports 203 dpi, 300 dpi (optional), and 600 dpi (optional) for high-resolution label printing.

The ZE511 prints up to 4.09 inches (104 mm) wide.

Yes, a field-installable UHF RFID kit is available for advanced encoding and tracking.

Standard ports include USB, Serial, Ethernet, Dual USB Host, and Bluetooth 4.1. Optional upgrades include Parallel, Wi-Fi (802.11ac), and additional Ethernet cards.

It features a tool-less quick-release printhead, modular drive system, and wide swing-open cage design for fast, hassle-free servicing.

The ZE521 supports wider labels with a print width of up to 6.6 inches (168 mm).

Yes, it supports an optional field-installable RFID encoder compatible with a wide range of UHF tags.

It offers 203 dpi and 300 dpi options for high-speed or high-quality printing.

The Zebra RFD40 Premium Plus RFID Sled delivers industry-first Wi-Fi 6 connectivity for seamless over-the-air device management, along with an industry-best 1,300+ tag readings per second for rapid cycle counting. It features a standard range circular polarized antenna, tri-function programmable trigger, enhanced 7000mAh battery capacity, and an ergonomic design optimized for warehouse efficiency. We offer this model with the SE4100 imager and Bluetooth/Wi-Fi connectivity for comprehensive mobile RFID solutions.

The ZE511 advances the ZE500 legacy with faster print speeds, performance-enhancing capabilities, and evolving intelligence. New features include a 4.3-inch full-color LCD touch screen for easier operation, field-installable RFID printing and encoding with Zebra's exclusive technology, and improved algorithms for easy calibration and media flexibility. The ZE511 also features Zebra's innovative Print DNA software suite for enhanced management, security, and remote capabilities.

The DS3678-HD captures both high-density 1D and 2D barcodes, including tiny 3 mil codes, as well as standard barcodes in virtually any condition. This dual functionality makes it ideal for scanning small, dense barcodes printed directly on product components in electronics manufacturing, as well as standard labels in warehouse environments. We offer this scanner as part of our comprehensive barcode solutions at barcodesinc.com.

The RFD40 Premium Plus Sled connects to Zebra eConnex-enabled devices including the TC21, TC26, EC50, and EC55 mobile computers, plus future compatible models. The connection process is simplified and can be established in seconds, allowing your team to deploy RFID capabilities across your existing Zebra device fleet without lengthy setup procedures.

The ZE511 features industrial all-metal construction engineered without cooling fans, with external cabinets designed to resist debris and water ingress—making it ideal for dusty environments or areas where water may be splashed. This rugged encased design delivers durability to handle 24/7/365 operations in demanding warehouse and manufacturing settings. The robust construction ensures reliable performance even in challenging conditions.

The DS3678-HD is built to survive 10 ft./3 m drops to concrete and 7,500 tumbles, making it virtually indestructible for tough production floors. It features dual IP65/IP68 sealing to handle extreme temperatures and conditions, ensuring reliable performance in electronics manufacturing and medical facilities. Contact us today to discuss how this ultra-rugged scanner can reduce your production line downtime.

Yes, the DS3678-HD is available in both corded and cordless configurations. The cordless model features Bluetooth 4.0 (Low Energy) connectivity for stable wireless communication without network interference, providing flexibility for workers moving across production lines and warehouse areas. Visit barcodesinc.com to explore our complete DS3678-HD kit options.

The ZE511 comes standard with USB 2.0, RS-232 Serial, 10/100 Ethernet, Bluetooth 4.1, Dual USB Host, and an Applicator Interface. You can also add optional Parallel, 802.11 a/c wireless, or additional Ethernet cards via the open internal communication slot. Additionally, the included Print Touch NFC tag allows you to simply tap a compatible mobile device on the printer to pair and print.

The RFD40 Premium Plus RFID Sled offers both Bluetooth and Wi-Fi connectivity, with industry-first Wi-Fi 6 support for faster, more reliable wireless performance. This dual connectivity approach ensures compatibility with various warehouse management systems and enables efficient over-the-air updates and device management across your operation.

Absolutely. The DS3678-HD offers dual functionality—the same scanner can be used on the production line for end-to-end track and trace of materials and in the warehouse from receiving to shipping. This versatility makes it a cost-effective single device solution for organizations with diverse scanning needs across multiple departments. We offer this multi-purpose scanner as part of our industrial scanning portfolio.

The ZE511 delivers best-in-class print speeds up to 18 inches per second with 600 dpi print quality for premium performance. For 203 dpi use cases printing faster than 14 ips, you can select the optional high-speed printhead. This combination of speed and resolution makes the ZE511 suitable for high-volume labeling in manufacturing, warehouse, retail, and healthcare applications.

The RFD40 Premium Plus represents a significant advancement with Wi-Fi 6 technology, industry-leading 1,300+ tag readings per second, and enhanced battery capacity compared to previous generations. The tri-function programmable trigger and optimized read range provide greater flexibility and speed for demanding warehouse and logistics environments. Contact us today to discuss how the RFD40 can improve your current RFID operations.

Print DNA is Zebra's innovative software suite that makes the ZE511 easy to setup, manage, maintain, and secure both onsite and remotely. It includes Printer Profile Manager Enterprise for centralized management across your networked print engines, PrintSecure for protecting against cyberattacks and unauthorized access, and onboard analytics to predict maintenance needs and minimize downtime. With Print DNA, you can remotely troubleshoot, monitor status, perform updates, and ensure your printers remain secure from IoT threats.

The DS3678-HD includes Zebra's DataCapture DNA technology platform, which features highly intelligent firmware, software, utilities, and apps designed to maximize scanning productivity and data accuracy. The scanner also incorporates PRZM Intelligent Imaging and multi-code data formatting capabilities for enhanced performance. Contact us today to learn more about the advanced features available from us.

The RFD40 Premium Plus RFID Sled is equipped with an enhanced 7000mAh battery designed for extended operation in warehouse and logistics environments. The exact runtime depends on usage patterns and connectivity settings, but the increased capacity supports full-shift operations with standard use. Visit barcodesinc.com or contact us today for specific battery performance data for your application.

Our complete DS3678-HD kit includes the cordless scanner, a shielded USB cable (CBA-U42-S07PAR) with 12V power support, a green standard cradle (STB3678-C100F3WW), a 12V 50W power supply, and a line cord. This comprehensive bundle is ready for immediate deployment in your manufacturing or warehouse environment. Visit barcodesinc.com or contact us today for current availability and pricing.

The RFD40 Premium Plus RFID Sled features an ergonomic, durable design built for demanding warehouse and logistics operations. The device is TAA compliant and available for US, Canada, and Puerto Rico markets. For detailed environmental specifications, temperature ranges, and durability ratings, we recommend contacting our team today to ensure this model meets your specific operational requirements.

The ZE511 features tool-free printhead replacement with a quick-release tab and improved socketed design that eliminates connectors, allowing you to replace printheads in seconds without tools. The modular drive design requires only three screws for quick offline servicing, and onboard analytics help predict and schedule maintenance to prevent unexpected downtime. Additionally, the newly designed interior workspace with a hinged cage system provides easy access to all components for fast, simple maintenance.