APG VB554-BG1618 Cash Drawer

The SLS M-Series RFID Mobile Solutions is designed for mobile inventory management in warehouses and distribution centers where mobility is critical. It delivers cycle counting solutions that minimize human error and intervention while maximizing count accuracy and efficiency, particularly in environments with high fork-lift traffic, hard-to-reach racking, and large tag volumes.

The SLS D-811 is designed to run entirely on Power-over-Ethernet (PoE) with no additional power cables required. This makes installation straightforward and cost-effective, as you can eliminate the need for dedicated electrical infrastructure at your dock door location. The system operates at minimal power while maintaining its 99.99% scan rate accuracy.

The SLS D-811 delivers a 99.99% scan rate accuracy while eliminating the need for manual barcode scanning at dock doors. Its Wave technology automatically tunes the reading zone to your environment, preventing cross-readings between sites and providing unrivaled reading zone controllability—critical for high-traffic warehouse operations where accuracy directly impacts inventory counts.

The SLS T-Series RFID Tunnel is designed to error-proof and enhance your supply chain by verifying shipments at item-level or container-level tagging. It provides visibility into what was actually shipped versus what was ordered, serving as a quality control safenet to ensure shipment accuracy and improve the customer experience. We offer this solution to help distributors and logistics operations reduce errors and maintain supply chain integrity.

The SLS D-800 is designed to run on Power-over-Ethernet (PoE) with no additional power cables required, making it ideal for dock door installations where cable management is a concern. This PoE design minimizes infrastructure complexity while maintaining the system's ability to operate at very minimal power consumption.

The SLS M-800 delivers an impressive read range of up to 50 feet, powered by our Wave® antenna technology. This exceptional range allows you to scan RFID tags across large warehouse zones efficiently, covering all three tag orientations within your defined scanning area for exceptionally high read acquisition rates.

The SLS M-800 RFID-enabled pallet is purpose-built for warehouses and distribution centers operating in high-volume environments with heavy forklift traffic. Its innovative pallet design minimizes pedestrian traffic in hard-to-reach locations while enabling forklift drivers to perform cycle counts efficiently. This solution is ideal for operations seeking to reduce human error and improve inventory accuracy in demanding industrial settings.

The SLS D-500 delivers 99.99% scan rate accuracy while operating on Power-over-Ethernet (PoE) with no additional power cables required. It features SLS Wave technology that tunes the portal to your surrounding environment, providing unrivaled reading zone controllability and preventing cross-readings between multiple reading sites. This makes it ideal for warehouse chokepoints where manual barcode scanning and human intervention occur.

SLS VIEW is a comprehensive RFID software suite designed to provide complete visibility into your enterprise assets, equipment, supplies, and inventory throughout your supply chain. The software collects and analyzes data from receiving through shipping, enabling better decision-making based on real-time asset tracking and movement visibility. We offer this intuitive and robust platform to help businesses optimize their operations from day-to-day asset management to order fulfillment and shipping control.

SLS VIEW includes seven specialized modules: SLSVIEW Capture for automated asset collection, SLSVIEW Cloud for asset tracking, SLSVIEW Mobile for asset management, SLSVIEW Hub for information sharing, SLSVIEW M-Series for inventory management, SLSVIEW T-Series for order fulfillment, and SLSVIEW D-Series for shipping control and receiving. We offer this complete suite to provide end-to-end visibility across your entire supply chain operations.

The SLS D-Series uses patented Wave® Antenna technology that uniformly illuminates space to minimize cross-reads and deliver 99.99% scan rate accuracy. Its tightly controlled read zones provide high accuracy at both pallet and item levels while the lightweight aluminum design withstands heavy industrial traffic and forklift damage. We offer this solution with hassle-free Power over Ethernet (PoE) installation and no additional server requirements, enabling a quick return on investment.

Power-over-Ethernet (PoE) allows the SLS D-511 RFID Dock Door to receive both data and power through a single network cable, eliminating the need for separate power cables at your dock door chokepoint. This design reduces installation complexity and cost while maintaining the system's ability to achieve 99.99% scan rate accuracy, making it ideal for high-traffic warehouse environments where cable management is a concern.

No, the SLS D-500 is designed to run entirely on Power-over-Ethernet (PoE), eliminating the need for separate power cables at your dock door. This simplifies installation and reduces infrastructure costs while maintaining minimal power consumption. Contact us today to discuss PoE setup requirements for your facility.

The SLS M-Series is compatible with multiple enterprise-grade RFID readers, including the Impinj R420, Impinj R700, Zebra FX7500, and Zebra FX9600. This compatibility ensures you can integrate the M-Series with your existing RFID infrastructure. Contact us today to confirm the right reader configuration for your specific application.

The SLS D-511 features SLS Wave technology antennas that intelligently 'tune' the reading portal according to your surrounding environment, providing unrivaled reading zone controllability. This advanced tuning capability prevents cross-readings between adjacent reading sites, ensuring that only items passing through your specific dock door are captured—critical for accurate inventory tracking in multi-door warehouse operations.

The M-800 is equipped with a robust Definitive 250Wh battery that provides 8+ hours of continuous operation—enough time to complete your full cycle count before needing to recharge. It features a standard 2-3 hour recharge cycle, plus a quick charge function that delivers 1.5 hours of use in just 20 minutes.

The SLS D-800 maintains a 99.99% scan rate accuracy while preventing cross-readings between reading sites. This exceptional accuracy is achieved through SLS's proprietary Wave technology, which tunes the portal according to the surrounding environment for unrivaled reading zone controllability.

SLS VIEW is compatible with multiple platforms including Windows Applications, Linux Embedded Client, Mobile (Android Embedded Client), and Cloud (MS Azure Cloud). This multi-platform support ensures seamless integration across your enterprise infrastructure, whether you're managing assets from the warehouse floor or the office.

Yes, the SLS T-Series is designed with flexibility in mind. SLS will work with your existing conveyor systems to deploy RFID technology, or design a complete solution if you're planning to add conveyor infrastructure in the future. Our team at Barcodes Inc can help you assess your current setup and determine the best integration approach for your operation.

The SLS D-Series is compatible with Impinj R420 and R700 readers, as well as Zebra FX9600 and FX7500 readers. This compatibility ensures you can integrate the dock door solution with your existing RFID infrastructure. Contact us today to verify compatibility with your specific reader model.

Wave technology is SLS's proprietary antenna tuning system that automatically adjusts the D-Series portal according to your surrounding environment, providing unrivaled reading zone controllability. This technology prevents cross-readings between reading sites and ensures consistent 99.99% scan rate accuracy regardless of environmental conditions. The dual antenna configuration (2 antennas included) covers all three tag orientations within your defined zone.

The SLS VIEW CLOUD STANDARD License supports up to 25 read points and includes the SLS VIEW Mobile App plus label printing capabilities. This monthly subscription is billed annually and provides access to SLSVIEW Capture, SLSVIEW Cloud, and SLSVIEW Mobile components for comprehensive asset tracking. Please note that this license requires separate purchase of software integration or a site start-up kit, as well as necessary NiceLabel licenses and a Windows or Android host system.

No. The SLS D-811 operates entirely on Power-over-Ethernet (PoE), eliminating the need for dedicated power cables or AC infrastructure at your dock door. This plug-and-play design significantly reduces installation complexity and cost, making it ideal for facilities where running new power lines would be impractical or expensive.

The SLS M-800 is equipped with a powerful 8-hour battery that provides sufficient runtime to complete your cycle count before needing to recharge. The battery includes quick charge capabilities, ensuring minimal downtime between operations and continuous productivity throughout your warehouse workflow.

The M-800 features Wave® antenna technology, which delivers an impressive read range of up to 50 feet. This advanced antenna design enables efficient inventory tracking across large warehouse areas and high tag volumes, making it exceptionally effective in complex distribution environments.

SLS VIEW software is compatible with leading RFID readers including the Impinj R420, Impinj R700, Zebra FX7500, and Zebra FX9600. This broad compatibility allows you to integrate existing RFID infrastructure or select the reader that best fits your warehouse or distribution environment. Contact us today to discuss which reader configuration works best for your specific asset tracking needs.

Yes, the SLS M-Series is manufactured for durability in demanding warehouse and manufacturing environments. The M-600 model features a custom aluminum extrusion and HDPE tabletop construction, making it robust and resistant to everyday wear and tear, with an IP63 rating for protection against dust and water ingress.

SLS Wave technology automatically tunes the D-500 portal to adapt to your specific environmental conditions, ensuring optimal reading accuracy regardless of surrounding interference. This adaptive tuning provides unrivaled reading zone controllability and prevents cross-readings between adjacent reading sites, which is critical in high-density warehouse operations. The result is consistent 99.99% accuracy across varying dock door scenarios.

The SLS M-800 is compatible with multiple industry-leading readers: Impinj R420, Impinj R700, Zebra FX9600, Zebra FX7500, and Alien F800. This broad compatibility ensures you can integrate the M-800 into your existing RFID infrastructure without costly equipment replacements.

SLS VIEW offers seamless integration with MES, WMS, ERP, and blockchain systems, allowing you to connect RFID data collection with your current business processes. This compatibility ensures that asset tracking data flows directly into your existing supply chain management infrastructure without requiring major system overhauls.

The D-800 uses SLS Wave technology to intelligently tune the RFID portal according to its specific surrounding environment, which prevents cross-readings between adjacent reading sites. This environmental tuning capability ensures that each dock door operates independently without interference from neighboring portals.

The SLS T-Series supports both item-level and container-level tagging, making it versatile for various supply chain applications. Whether you're tracking individual products or entire shipping containers, the tunnel can verify and validate tagged items as they move through your distribution process. Contact us today to discuss your specific tagging requirements.

The SLS 1000D811-C comes complete with an Impinj R700 reader, which provides the processing power needed for enterprise-level RFID operations. The R700 is compatible with the D-Series antenna array and supports the high-performance requirements of dock door applications in distribution centers and warehouses.

Yes, the D-811WP designation indicates this model is weatherproof and includes two 8-foot weatherproofed antenna panels designed to withstand industrial, high-traffic environments. The system is engineered to maintain full functionality even when exposed to forklift damage and harsh warehouse conditions. We offer this model specifically for dock door applications where weather exposure is a concern.

The SLS D-511 (model 1000D511-G-SLS) comes equipped with an Impinj R700 reader. The SLS D-Series dock doors are also compatible with other enterprise-grade readers including the Impinj R420 and Zebra FX7500/FX9600, allowing you to integrate this solution into existing RFID infrastructure available from us.

The SLS D-Series features plug-and-play installation powered by standard Power over Ethernet (PoE)—no additional power cables or servers are needed. This scalable design makes deployment quick and straightforward at dock doors where minimal infrastructure changes are required. Visit barcodesinc.com to learn more about installation support and options.

Yes, the SLS D-Series is engineered to operate reliably across a wide temperature range of -4°F to 140°F (-20°C to 60°C), making it suitable for cold storage facilities, heated warehouses, and outdoor dock environments. This durability ensures consistent performance regardless of seasonal or climate-controlled conditions at your facility.

The system features a 96-inch-tall portal with 2 antennas, includes two 8-foot panels, two 30-foot cables, a stack light, photo eye, connector, bollards, angle irons, and complete installation hardware. This comprehensive package is designed for immediate deployment at receiving or shipping doors without requiring additional structural modifications.

The SLS M-Series operates on PoE (Power over Ethernet) 802.3af, simplifying installation and reducing cable requirements in your facility. The system uses standard RPTNC connectors and operates in the 902-928 MHz frequency band (FCC) or 865-868 MHz (ETSI), depending on your region.

Yes, SLS VIEW is specifically designed to minimize human error and maximize accuracy in quality control and inventory management processes. The software's real-time monitoring capabilities allow operators to identify discrepancies on-the-spot and optimize workflows, making it ideal for warehouses, distribution centers, and manufacturing environments. With automated data capture and tag read event management, you can achieve superior visibility and control over your assets without manual counting.

The SLS D-500 features 2 antennas and stands at 62 inches in height, making it suitable for standard warehouse dock door installations. This configuration is optimized for reading RFID tags on pallets and cases passing through your dock while maintaining precise zone control. Visit barcodesinc.com to verify dimensional compatibility with your specific dock setup.

Yes, the M-800 is specifically engineered for manufacturing, warehouse, and distribution center environments where durability is critical. Its rugged pallet design allows forklift operators to handle it easily while reducing pedestrian traffic in high-risk areas, and it's built to withstand industrial abuse while maintaining full functionality.

The SLS D-811 comes equipped with an Impinj R700 reader mounted in an enclosure, making it ready for immediate deployment. The D-Series is also compatible with other enterprise RFID readers including the Impinj R420 and Zebra FX9600 and FX7500, allowing flexibility if you need to integrate with existing infrastructure. Contact us today to discuss your specific reader requirements.

The SLS D-511 package includes two 5-foot panels, dual antennas, 30-foot cables, the Impinj R700 reader, a stack light, photo eye sensor, connector, and installation hardware. The unit measures 62 inches in height with a 15-inch depth and 4-inch profile, making it suitable for standard dock door openings while maintaining a compact footprint.

The SLS D-800 is 96 inches tall and equipped with 2 antennas designed to cover all tag orientations within a user-defined zone. This multi-antenna configuration allows for exceptionally high read acquisitions across the dock door opening.

The M-800 is compatible with multiple RFID readers including the Impinj R700, Impinj R420, Zebra FX7500, and Zebra FX9600. We offer the M-811 configuration which includes the R700 reader, along with four antennas, an enclosure box, stack light, cabling, and Wi-Fi capability for seamless integration into your operation.

SLS VIEW enables tracking of all tagged enterprise assets including equipment, supplies, and personnel throughout your supply chain. From receipt through shipping and every operation in between, the platform provides real-time visibility into the day-to-day movement and status of your assets.

All SLS T-Series RFID Tunnels are designed and built at SLS headquarters in Howell, Michigan, with each client's business processes in mind. This domestic manufacturing ensures quality control and allows SLS to customize solutions based on your specific operational needs. We partner with SLS to bring you tunnels engineered for your success.

Yes, the SLS D-500 is specifically engineered to prevent cross-readings between reading sites through its advanced Wave technology and precise reading zone controllability. This is essential in multi-dock environments where RFID portals are positioned close together. We offer the D-500 as a reliable solution for facilities requiring isolated, accurate readings at each dock door.

The SLS D-511 is engineered to withstand industrial, high-traffic environments and forklift damage while maintaining full functionality. The antennas are specifically manufactured to absorb large impacts without compromising performance, and the entire D-Series solution is designed for distribution centers and warehouses where equipment faces daily abuse and demanding operational conditions.

The SLS D-Series antennas are engineered to withstand forklift impacts and heavy industrial use while maintaining full functionality. The system is built specifically for manufacturing, distribution center, and warehouse environments where equipment faces regular abuse, ensuring long-term reliability and minimal downtime.

We offer four D-Series models with varying coverage widths: the D-800 (96" wide, 45 lbs) for full-width dock doors, the D-500 (62" wide, 30 lbs) for standard openings, the D-200 (24" wide, 10 lbs) for partial coverage, and the D-100 (61" wide, 10 lbs) for specialized applications. Contact us today to assess your dock door dimensions and recommend the optimal model for your operation.

Yes, SLS VIEW meets FCC, IC, and CE mark compliance requirements, ensuring it meets regulatory standards across North America and Europe. Contact us today to verify specific compliance requirements for your region or industry.

The SLS M-600 has a weight capacity of 500 lbs when evenly distributed, and weighs 100 lbs itself. Its dimensions are 48.5L x 31.5W x 38H inches, making it suitable for mobile deployment throughout warehouse and distribution center operations.

The complete package includes the 96-inch tall D-800 portal frame, two weatherproofed 8-foot antenna panels, two 30-foot weatherproofed cables, the Impinj R700 reader in an enclosure, a stack light for visual alerts, a photo eye sensor, necessary connectors, and all installation hardware. This comprehensive kit is designed for plug-and-play installation with minimal additional components required.

Yes, the SLS M-800 is engineered with a robust, durable construction specifically designed to withstand tough industrial environments including constant forklift traffic and demanding distribution center conditions. Its heavy-duty build ensures long-term reliability and minimal maintenance in high-wear warehouse settings.

The SLS T-Series enhances operations by automating shipment verification and reducing manual quality control steps, which decreases errors and improves customer satisfaction. By providing real-time visibility into what was shipped versus what was ordered, you gain actionable data to optimize your supply chain. Available from us, the tunnel serves as a critical safenet for accuracy-sensitive distribution environments.

Yes, the SLS D-800 is engineered specifically for manufacturing, distribution center, and warehouse-like environments where durability and reliability are critical. The system maintains full functionality while operating in demanding industrial settings with minimal maintenance requirements.

The M-800's innovative pallet shape is specifically designed for easy forklift driver operation, eliminating the need for manual carrying and reducing pedestrian traffic in hard-to-reach, high-volume, and dangerous scanning locations. This design minimizes human error and improves overall count accuracy while enhancing workplace safety.

SLS VIEW requires a Windows or Android host system, NiceLabel licenses (purchased separately), and either a software integration package or site start-up kit. The software connects to RFID readers via standard network connectivity and manages barcode imager integration, Wi-Fi connectivity, and Bluetooth device management through the SLS VIEW Mobile app. We recommend consulting with our team to ensure your existing infrastructure meets all requirements before deployment.

SLS VIEW Cloud stores all tag read events and asset movement history, maintaining a complete record of each asset's journey through your supply chain. The system automatically records asset ownership, item type, EPC serialized identifiers, and movement stages, allowing you to track inventory from receiving through shipping. This historical data is preserved even during network interruptions and can be shared through SLSVIEW Hub for enterprise-wide visibility. Visit barcodesinc.com to learn more about implementing comprehensive asset tracking for your operation.

The SLS D-500 is ideal for dock door chokepoints where human intervention and manual barcode scanning occur, such as inbound/outbound receiving, cross-docking, and returns processing. Its PoE operation and minimal power consumption make it perfect for facilities with limited electrical infrastructure at dock areas. Contact us today to discuss how the D-500 can optimize your warehouse workflow.

Yes, the SLS D-511 is completely plug-and-play with no additional servers or AC power required—just PoE connectivity. The straightforward installation process allows for repeatable and scalable deployment across multiple dock doors, enabling rapid ROI and quick expansion as your warehouse grows. Contact us today to discuss how we can help you implement this cost-effective RFID solution across your facility.

The SLS D-800 is compatible with leading RFID readers including the Impinj R420, Impinj R700, Zebra FX7500, and Zebra FX9600. We offer complete integration support and can help you select the right reader configuration for your specific application—contact us today for compatibility details.

Yes, SLS designs each tunnel solution with the client's business processes and success in mind, whether you have an existing conveyor infrastructure or are planning a new setup. The customization approach ensures the tunnel integrates seamlessly with your specific workflow and operational requirements. Visit barcodesinc.com or contact us today to discuss how we can tailor an RFID tunnel solution for your facility.

We offer several add-ons and accessories for the M-800 including an audible stack light for visual notifications, a user interface (UI), UI mount hardware, software, and replacement batteries. Contact us today to discuss which accessories best fit your specific warehouse or distribution center needs.

SLS VIEW provides real-time insights and automated data collection that empower businesses to make informed decisions based on reliable, up-to-date information across their entire supply chain. The intuitive interface simplifies asset management while the robust backend ensures accurate inventory tracking and operational efficiency. Visit barcodesinc.com to learn how our team can help implement this solution for your organization.

The M-811 package from us includes the metal pallet, four antennas, the R700 RFID reader, an enclosure box, battery, stack light, cabling, and Wi-Fi capability—everything needed for immediate deployment in your warehouse or distribution center. Contact us today at barcodesinc.com to learn more about this complete RFID mobile solution.

The SLS D-Series uses Wave technology to create a precisely controlled reading zone that prevents cross-readings between adjacent reading sites, a critical feature in multi-door warehouse environments. The dual antenna design with 3.0 dBi gain and 50-ohm impedance ensures that tags are only read when they pass through your defined portal area. This capability, combined with the 99.99% accuracy rate, makes it ideal for high-volume inventory operations where accuracy is essential.

Yes, the SLS M-Series offers optional add-ons including a user interface (UI) and UI mount to customize the system for your specific workflow needs. Software is purchased separately through SLS View for M-Series management. Visit barcodesinc.com or contact us today to discuss which accessories best fit your operation.

Yes. The SLS D-Series is completely scalable and plug-and-play—no additional servers or AC power infrastructure is required for each installation. This repeatable design allows you to deploy the same solution across multiple dock doors with consistent performance, enabling rapid ROI and straightforward expansion as your facility grows.

The Wave® Antenna technology in the SLS D-Series creates tightly controlled read zones that uniformly illuminate the dock door area while minimizing spillover to adjacent reading sites. This advanced zone management prevents cross-reads between multiple dock doors operating simultaneously, ensuring accurate tag identification even in high-traffic warehouse environments. The system maintains this precision while operating at minimal power consumption.