Loading...

APC BE600M1 Power Device

APC Back-UPS Series - APC by Schneider Electric Back-UPS 600VA Tower UPS - Tower - 10 Hour Recharge - 3.20 Minute Stand-by - 120 V AC Input - 120 V AC Output - 7 x NEMA 5-15R, 1 x USB
  • Adjustable voltage sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Audible alarms - Provides notification of changing utility power and UPS power conditions
  • Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Building Wiring Fault Indicator - This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Cold-start capable - Provides temporary battery power when the utility power is out.
  • Disconnected battery notification - Warns when a battery is not available to provide backup power.
  • Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Simple battery replacement - Increases UPS availability by allowing quick, easy battery replacement.
  • Transformer Block Spacing - Connect bulky transformer block plugs without covering up other outlets.
  • USB connectivity - Provides management of the UPS via a USB port (not available on all models).
Read More

Need a different version? See all APC Back-UPS Series Accessories  

$123.48
In Stock
Chat Now for Qty Discount
Add to Quote
Add to My Shopping List Add to Compare
APC BE600M1 Power Device
APC BE600M1 Power Device
APC BE600M1 Power Device
APC BE600M1 Power Device APC BE600M1 Power Device APC BE600M1 Power Device
Full specifications (PDF)
APC Back-UPS Series Accessory Model Overview
An Back-UPS Series instantly switches your computer to emergency battery backup power and allows you to work through brief power outages or to shut down your system in the event of an extended outage. High-performance surge suppression protects your computer from electrical noise and damaging power surges - even lightning.
APC BE600M1 Power Device Overview

Battery Backup & Surge Protector for Electronics and Computers

The Back-UPS battery backup offers guaranteed power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business. Models supply battery backup during outages and unsafe voltage fluctuations, as well as provide protection from damaging surges and spikes. They're available in 'tower' or 'floor' styles, and together with a variety of standard features, they are the perfect choice to protect your data and keep you connected.

More from the Manufacturer

Full specifications (PDF)
Technical Information
Plug/Connector Type:
NEMA 5-15P
Receptacle Type:
NEMA 5-15P
Receptacle Detail:
  • 7 x NEMA 5-15R
  • 1 x USB
Number of Battery & Surge Outlets:
7
Number of Surge-only Outlets:
2
Cord Length:
5 ft
Transfer Time:
6 ms
Application/Usage:
  • Electronic
  • Computer
  • Gaming Console
  • Security System
  • Television
  • Cable Box/DVR
  • Wireless Router
  • Modem
  • Wi-Fi Router
  • IOT Device
  • Network
Power Description
Load Capacity:
600 VA/330 W
Input Voltage:
120 V AC
Input Voltage Range:
92 V AC - 139 V AC
Output Voltage:
120 V AC
Input Frequency:
60 Hz
Output Frequency:
60 Hz
Waveform Type:
Stepped Approximated Sine Wave
Surge Energy Rating:
490 J
Management
Alarm:
  • On Battery
  • Low Battery
  • Overload
Controls/Indicators
Status Indicators:

LED Status Display:

  • On Line
  • On Battery
  • Replace Battery
  • Overload
Battery Information
Battery Characteristics:
Maintenance-free, Sealed, Leak-proof
Battery Chemistry:
Lead Acid
Battery Energy:
237.6 kJ
Backup/Run Time (Full Load):
3.20 Minute
Backup/Run Time (Half Load):
11.80 Minute
Typical Battery Recharge Time:
10 Hour
Hot Swappable:
Yes
Replaceable Battery:
Yes
Environmental Conditions
Maximum Operating Temperature:
104°F (40°C)
Storage Temperature:
5°F (-15°C) - 113°F (45°C)
Maximum Operating Elevation:
9842.52 ft
Maximum Storage Elevation:
49212.60 ft
Storage Relative Humidity:
0% - 95%
Sound Emission (A-Weighted):
35 dB(A)
Thermal Dissipation:
4.69 W
Physical Characteristics
Height:
5.5"
Width:
10.8"
Depth:
4.1"
Form Factor:
Tower
Weight (Approximate):
7.69 lb
Miscellaneous
Package Contents:
  • Back-UPS 600VA Tower UPS
  • User manual
    • Certifications & Standards:
    California (CEC) Battery Charger
    Energy Star:
    Yes
    Environmentally Friendly:
    Yes
    Environmental Certification:
    RoHS
    Mercury Free:
    Yes
    Warranty
    Limited Warranty:
    3 Year
    Additional Warranty Information:
    3 years repair or replace
    Item Numbers
    GTIN: 0715009185091, 0731304325116, 0997848820313, 4923213148900
    UPC: 715009185091, 731304325116, 800100006724, 997848820313
    EAN: 0715009185091, 0731304325116, 0997848820313, 4923213148900
    UNSPSC: 39121011
    Get help from a Barcoding Expert!

    What type of Barcode are you scanning?

    The APC BE600M1 Power Device is also known as APC-BE600M1