Loading...

Altronix MAXIM3 Power Device

The Altronix MAXIM3 Power Device has been discontinued.
No direct replacement is available.
Please contact us for a suitable substitute.
Altronix ALTV2416 - Altronix MAXIM3 Proprietary Power Supply - Wall Mount - 110 V AC Input - 16 +12V Rails
Discontinued Need Assistance?
Recommended TrueSupport Coverage (/mo.)
 
x

Are you sure you don't need TrueSupport?

The average internal IT
cost for device support is over per year!

With TrueSupport you're
covered - and for way less!
  • Hardware Helpdesk Support
  • RMA Repair Facilitation
  • OEM Service Contract Management
  • Premium Phone & Email Support
  • Billed annually per device

Only /month
Subtotal ( items)
 
x
You've just added this product to the cart:

Go To Cart
Add to Quote
Altronix ALTV2416 Accessory Model Overview
The Altronix ALTV2416 Power Supply provides 24VAC or 28VAC distributed via sixteen (16) fuse or PTC protected outputs for powering CCTV Cameras, heaters and other video accessories. It has a supply current of 24VAC @ 8 amp (200VA) or 28VAC @ 7 amp (200VA). Main fuse is rated @ 10 amp/250V. It has a power ON/OFF switch. ALTV2416 Power Supply's ease of installation saves time and eliminates costly labor.
Altronix MAXIM3 Power Device Overview

This unit distributes and switches power to access control systems and accessories. They convert a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC or 24VDC fuse protected outputs. These Fail-Safe/Fail-Secure power outputs may be converted to dry form "C" contacts. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. All interconnecting equipment must be UL Listed.

Technical Information
Protection Type:
  • Surge
  • Thermal Overload
  • Short Circuit
Power Description
Number of +12V Rails:
16
Input Voltage Type:
AC
Input Voltage:
110 V AC
Output Voltage:
  • 12 V DC @ 5 A
  • 24 V DC @ 5.4 A
Input Current:
3.5 A @ 110V
Interfaces/Ports
Plug/Connector:
On/Off Switch
Physical Characteristics
Form Factor:
Wall Mount
Height:
26"
Width:
19"
Depth:
6.3"
Weight (Approximate):
38.60 lb
Miscellaneous
Compatibility:
  • Signal Equipment

Access Control Devices:

  • Mag Locks
  • Electric Strikes
  • Magnetic Door Holders
Item Numbers
UNSPSC: 39121004
Get help from a Barcoding Expert!

What type of Barcode are you scanning?

The Altronix MAXIM3 Power Device is also known as ALT-MAXIM3