Altronix AL1024ULACM Power Supply-Charger

Starting at:

Eight (8) independently controlled fuse protected outputs.

The AL1024ULACM Power Supply-Charger converts an 115 VAC 60Hz input into eight (8) independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. AL1024ULACM Power Supply-Charger will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

The Altronix AL1024ULACM Power Supply-Charger is also known as the Altronix AL1024ULACM Power Supply-Charger

AL1024ULACM Power Supply-Charger Options
Altronix AL1024ULACM Power supply-Charger (AL1024ULACM)
24VDC at 10 AMP with ACM8 Power Controller
Ships in 3-5 Days
+ Add to Quote