The NetVanta1224STR Switch from ADTRAN is a standards-based, non-blocking Layer 2 switching solution available at a cost up to 50 percent less than competing switches. This device is suitable for interconnecting LAN devices or for network segmentation in applications requiring Fast Ethernet or Power over Ethernet functionality. This lineup features the NetVanta 1224STR unique, all-in-one access platforms that combine switch, router, modular WAN interface, and firewall in a single 1U chassis, with optional VPN and dial backup.
A single WAN access slot in the back of the NetVanta chassis supports a variety of Network Interface Modules (NIMs) including ADSL, 56/64k, T1/FT1, T1/FT1 with DSX-1, E1/FE1, E1/FE1 with 703, Dual T1, or a serial interface. Optional Dial Backup Modules (DIMs) support business continuity and disaster recovery. Analog or ISDN BRI DIMs prevent downtime by dialing around a failed circuit to any PPP compliant device. The ADSL NIM may also be used for broadband backup.
Based on the ADTRAN Operating System (OS), these devices offer non-blocking Layer 2 switching functionality.1000Base-T/SFP Gigabit ports are also included on the NetVanta 1224STR for uplink and stacking requirements. An integral IP router provides cost-effective Internet access, corporate Frame Relay or point-to-point connectivity using routing protocols such as OSPF, BGP, and RIP.A single WAN access slot in the back of the NetVanta chassis supports a variety of Network Interface Modules (NIMs).
The ADTRAN OS offers a standard Command Line Interface (CLI) that mimics the widely deployed, industry de facto standard and an intuitive web-based GUI with step-by-step configuration wizards.For more comprehensive management of your NetVanta-based network, ADTRAN offers n-Command. This ADTRAN-designed network management system provides the ability to manage firmware revisions, push firmware upgrades and configuration changes, backup and restore configurations, and manage security policies and Access Control Lists (ACLs).
- Port Mirroring
- Telnet
- SYSLOG
- Link Aggregation
- Simple Management Protocol SNMP v2
- Support for 802.1Q Virtual LANs (VLANs)
- 110 V AC
- 220 V AC
- A stateful inspection firewall comes standard and optional VPN functionality is available to support up to 500 VPN tunnels
- Single WAN interface accommodates NetVanta NIMs and DIMs for DSU/CSU functionality and optional dial backup
- TFTP firmware update
- Gigabit Ethernet Port: Auto-Rate and Auto-Duplex
- Intuitive web-based Graphical User Interface (GUI)
- SIP ALG for NAT traversal in VoIP applications
- Stacking with single IP address management
- Interoperable in established, multi-vendor networks
- Space-savings, equipment consolidation
- DES/3DES and AES encryption
- RFC1490 Encapsulation (Mutiprotocol Over Frame Relay)
- LMI Types: LMI, CCITT (Annex A), ANSI (Annex D), Static
Agency Approvals:
- FCC Part 15 Class A
- CE Mark
- FCC Part 68
- C-tick
- UL 1950/CSA
IEEE Standards:
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.1Q
- IEEE 802.1p
- IEEE 802.3ad
- IEEE 802.1D STP
- IEEE 802.1ab LLP
- IEEE 802.1w RSTP