Adtran 12008810 Accessory

Yes. Batch mode allows the collection of up to 40,000 RFID tags with no real-time host connection. When a connection is available again, simply sync to upload the data to the host device.

Charging and cradle options include a cable cup, USB-C cable, USB wall brick, 1-slot charging cradle, 1-slot charging and USB cradle, multi-slot charging cradle, multi-slot charging and Ethernet cradle, and a 4-slot battery toaster. Other accessories include eConnex™ adaptors for supported Zebra mobile computers, the OtterBox uniVERSE case system adaptor for smartphones, the Battery Locking Foot, and a belt holster.

Yes. They carry EN 60601-1-2 electromagnetic compatibility certification for medical electrical equipment, and the Premium Plus imager is classified as an Exempt Risk Group LED product under IEC/EN 62471. Combined with IP54 sealing and a 5-foot drop spec, they are built for clinical and pharmacy settings as well as the warehouse floor.

Retail teams use them for cycle counting, item finding, planogram compliance, returns, inventory and warehouse management, back-of-store, BOPIS/BOPAC, direct store delivery, and route accounting. Hospitality applications include check-in and administration, event and concert ticketing, loyalty cards, food safety and traceability, inventory management, and field service. Healthcare applications include specimen and patient tracking, hospital asset and staff tracking, patient identification and admission, medication administration, and pharmacy management.

The sleds are configured for regional frequency bands: US 902–928 MHz, EU 865–868 MHz, 916.3 / 917.5 / 918.7 MHz, and Japan 916–921 MHz (with LBT). All operate at 0–30 dBm EIRP. Regulatory approvals include FCC Part 15 Subpart C (US), EN 302 208 (EU), and RSS-247 (Canada), so confirm the correct regional configuration when ordering.

Both sleds are rated for multiple 5-foot (1.5-meter) drops to concrete and a 500-cycle, 1.6-foot (0.5-meter) tumble spec, with IP54 sealing and an operating range of 14°F to 122°F (-10°C to 50°C). Power comes from a quick-release PowerPrecision+ Li-Ion 7,000 mAh battery that can be swapped without removing the mobile computer. Each cradle cup has two sets of charging pins to charge the sled alone, the mobile computer alone, or both together, with one-slot and multi-slot cradles in charge-only and communication variants, plus a 4-slot battery toaster. An optional Battery Locking Foot secures the battery against damage or theft.

Batch mode captures up to 40,000 RFID tags with no live host connection; just sync to upload the data whenever a connection is available. The sled can also be tethered to a Windows PC or other host via the USB-C port or cable cup and used as a fixed RFID reader. For setup and maintenance, the sleds connect to 123RFID Desktop by USB cable, cable cup, or Bluetooth for live and offline configuration, proofs-of-concept, demos, and firmware upgrades.

Both models deliver 1,300+ tag reads per second — up to 30% faster than the next leading competitor — with a 40-foot (12-meter) nominal read range and an ultra-accurate item-finder mode for locating a specific item or asset. They support EPC Class 1 Gen 2 and EPC Gen2 V2, along with the Gen2X industry standard. The tri-function programmable trigger gives associates instant access to RFID reading, barcode scanning, and a third function of your choosing, such as the enter key or push-to-talk.

Yes. Integrated Wi-Fi 6 (802.11ax/ac/a/b/g/n, 2×2 MU-MIMO) enables over-the-air device management, and sleds can also be managed through Ethernet cradles or via the attached host device. Cradle-based management allows you to set configuration, push firmware upgrades, and pull device health information.

They connect directly to eConnex™-enabled Zebra mobile computers with snap-and-go pairing, including the TC21/26, EC50/55, WWAN-enabled variants, and future models. They also connect wirelessly over Bluetooth 5.3 with NFC tap-to-pair, supporting Zebra mobile computers and tablets, third-party Android and iOS smartphones, and Windows-based PCs. An OtterBox uniVERSE-compatible adaptor lets users slide a wide range of smartphones on and off, and tool-free sled adaptors can be swapped by associates without sending devices back to IT.

Both sleds share the same RFID performance, connectivity, battery, and durability. The difference is barcode scanning: the Premium Plus adds an integrated SE4100 imager for 1D and 2D scanning, which handles difficult barcodes including poorly printed, damaged, dirty, crinkled, low-contrast, glossy, and electronic barcodes on dimly lit phone screens. The imager adds a small amount of weight — the Premium is approximately 19.1 oz (541 g) with battery, the Premium Plus approximately 19.6 oz (556 g).

No major rewrite is required. The RFD40 SDKs are based on the current Zebra RFID handheld SDKs, so in most cases only a recompile of your existing application against the new SDK is needed. The sled also connects to 123RFID Desktop by USB cable or cable cup for live and offline configuration, proofs-of-concept, demos, and firmware upgrades — and can be tethered to a Windows PC or other host as a fixed USB reader.

It is rated for multiple 5-foot (1.5-meter) drops to concrete and a 500-cycle, 1.6-foot (0.5-meter) tumble specification, with IP54 sealing against dust and water. The operating temperature range is 14°F to 122°F (-10°C to 50°C), and storage range is -40°F to 158°F (-40°C to 70°C).

The RFD40 uses a quick-release PowerPrecision+ Li-Ion 7,000 mAh battery that can be swapped without removing the mobile computer. Each cradle cup has two sets of charging pins, so it can charge the sled alone, the mobile computer alone, or both while attached. Cradles are available in one-slot and multi-slot, charge-only and communication variants, along with a 4-slot battery toaster, USB-C cable, and cable cup. An optional Battery Locking Foot secures the battery in place to help prevent damage or theft.

The sled reads 1,300+ tags per second — up to 30% faster than the next leading competitor — with a nominal read range of 40 feet (12 meters). An ultra-accurate item-finder mode helps locate a specific item or asset, and the tri-function programmable trigger gives associates instant access to RFID reading, barcode scanning, and a third function of your choosing, such as the enter key or push-to-talk.

The RFD40 connects to eConnex™-enabled Zebra mobile computers using snap-and-go pairing, including the TC21/26 and EC50/55, plus WWAN-enabled variants and future Zebra models. Sled adaptors are tool-free and easy to change, so associates can swap the adaptor themselves to maintain compatibility — no need to send devices back to IT for retrofitting.

The Dell 342-1999 is a 1 TB hard drive with a 2.5" internal form factor, 7200 RPM speed, and SATA/300 interface. This drive is hot-swappable and hot-pluggable, making it ideal for systems requiring quick drive replacement without downtime. We offer this genuine Dell component for reliable storage solutions in enterprise and mobile computing environments.

The Datalogic 95B080920 is an optical encoder designed for automated identification and measurement applications across warehousing, logistics, and manufacturing. This incremental encoder with 2000 pulses per revolution resolution is used to track motion, position, and dimensions in conveyor systems, parcel sorting, and product profiling operations. We offer this encoder as part of our comprehensive AIDC solutions for enterprises requiring precise motion detection and feedback.

The Datalogic 95B080920 operates on 5-30 Vdc power supply, making it compatible with most industrial control systems and PLC environments. The encoder features an M12 connector for secure, standardized industrial connections. Visit barcodesinc.com for detailed wiring diagrams and integration support with your existing automation infrastructure.

Yes, the 2.5" form factor of the Dell 342-1999 makes it compatible with laptop and mobile computing systems. The hot-swappable design allows for easy installation and replacement in portable devices without requiring a complete system shutdown. Contact us today to verify compatibility with your specific Dell system model.

This encoder delivers 2000 pulses per revolution (PPR) resolution with a 58mm diameter housing and hollow 15mm shaft design. The hollow shaft allows for easy mounting over existing shafts or drive components without requiring shaft modifications. This configuration makes it ideal for retrofit applications in existing conveyor and sorting systems.

The 7200 RPM speed provides faster data access compared to standard 5400 RPM drives, while the hot-swappable design minimizes system downtime during maintenance—critical for warehouse management systems and mobile inventory devices. The SATA/300 interface ensures reliable performance in demanding logistics environments. We offer this drive as part of our comprehensive AIDC solutions for supply chain operations.

Yes, the Datalogic 95B080920 is engineered for industrial environments with robust M12 connectors and sealed housing designed to withstand typical warehouse conditions including temperature fluctuations and humidity. For specific environmental ratings and durability certifications, contact us today—our technical team can confirm compatibility with your facility's operating conditions.

Yes, the Dell 342-1999 can function as a primary or secondary storage drive depending on your system configuration. Many Dell systems feature E-Module Bay II for secondary HDD options, allowing you to expand storage capacity while maintaining hot-swap functionality. Visit barcodesinc.com to explore compatible systems and expansion options.

The M12 connector is an industrial standard that provides quick-disconnect capability, allowing technicians to rapidly swap encoders without rewiring or reconfiguring systems. This standardized interface reduces downtime during maintenance and simplifies integration across multiple conveyor lines or sorting stations. We stock M12-compatible cables and adapters to support seamless deployment.

The Dell 342-1999 operates at 7200 RPM compared to standard 5400 RPM drives, delivering faster read/write speeds and improved performance for data-intensive applications. The higher RPM makes it better suited for active warehouse management systems and real-time inventory tracking where responsiveness is critical. We stock both performance tiers to match your specific operational requirements.

The 2000 PPR resolution is ideal for parcel dimension scanning, package sorting accuracy, and conveyor speed monitoring where precise position feedback is critical for billing accuracy and operational efficiency. This resolution level balances precision with cost-effectiveness for high-volume logistics operations. Contact us today to discuss how this encoder can optimize your warehouse automation workflows.

While the Dell 342-1999 itself is a standard SATA drive, Dell systems supporting this drive offer encrypted storage options including FDE/SED (Full Disk Encryption/Self-Encrypting Drive) with FIPS Opal compliance for secure data handling. For security-critical warehouse and logistics operations, we can help you select systems with encryption capabilities. Contact us today to discuss your data security requirements.