- IEEE 802.1x Port-based Radius Authentication (EAP-MD5, EAP-PEAP)
- WEP, WPA-PSK, WPA2-PSK, WPA-ENT, and WPA2-ENT authentication (IEEE 802.11i ready)
- MAC-based wireless access control
Cisco WRVS4400N Wireless Router
Cisco WRVS4400N Access Point Model Overview
The Wireless-N WRVS4400N Gigabit Security Router with VPN implements draft IEEE 802.11n (Wireless-N) technology with a Virtual Private Network (VPN) Router that features a built-in 4-port full-duplex 10/100/1000 Gigabit Ethernet switch. By overlaying the signals of multiple radios, Wireless-N's "Multiple In, Multiple Out" (MIMO) technology multiplies the effective data rate resulting in greater than 100 Mbps throughput and at least twice the range of Wireless G.
- SNMP version 1, 2c
- Port-based VLAN
- Event Logging: Local, syslog, e-mail alerts
- Firmware upgradable through web browser
- Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
- Network address translation (NAT)
- DMZ
- IP Sweep Detection
- Application Anomaly Detection (HTTP, FTP, Telnet, RCP)
- P2P Control
- Instant Messenger Control
- L3-L4 Protocol (IP, TCP, UDP, ICMP) Normalization
- URL blocking
- Keyword blocking
- IEEE 802.11e - Ready (wireless QoS)
- IP-based Access Control List (ACL)
- Stateful Packet Inspection (SPI) firewall
VPN:
- 3DES encryption
- VPN passthrough of PPTP, L2TP, IPSec
- MD5/SHA1 authentication
- IPSec NAT-T
- Wireless-N WRVS4400N Gigabit Security Router with VPN
- User Guide and Quick VPN Client Software on CD-ROM
- Network Cable
- Power Adapter
- Stands
- Registration Card
- Quick Install Guide
- Secure, high-speed wireless access for small businesses
- Superior level of security, including an intrusion-detection system
- FCC class B
- CE
- ICES-003
- IEEE 802.11n (Draft)
- IEEE 802.11g
- IEEE 802.11b
- IEEE 802.1x
- IEEE 802.11i
- IEEE 802.11e